Summary of the content on the page No. 1
Environment-friendly double-driver
automatic washing machine
User's manual
This manual is for
XQSB60-JN
Please read this manual
carefully before using.
0030806318B
Retain it for future reference.
Summary of the content on the page No. 2
Contents Names of the parts..................................................1 Safety precautions ................................................2 Installation and adjustment ..............................4 Install the water inlet hose....................................6 Preparation before washing................................................8 The musts in washing ...........................................8 Usage of the detergent ....................................9 Put in laundries......
Summary of the content on the page No. 3
Names of the parts Water inlet valve Top lid handle Top lid component Water absorption Attachment block cushion Inner cover component (2 pieces) Detergent box Lint filter(2 pieces) Control panel Outer tub cover Softener inlet Liquid bleacher inlet Balance ring Inner tub Pulsator Front control board Handle(2 pieces) Front door Cabinet Fixed leg (3 pieces) Back cover Cabinet base Drain hose Adjustable leg Decorative board Adjustable leg film Meaning and description of the symbols Contents m
Summary of the content on the page No. 4
Safety precautions In common usage of the washing machine, the power Please insert the power cord into special receptacle plug shall be ready to be pulled or plugged with hand. with rated voltage. Be sure to use single-phase three Be sure to pull the plug off and close the water faucet pins receptacle. Ensure the earthing prong of the when occurring power failure, delivering the machine, power receptacle is earthed reliably. Use leakage setting the machine idle or cleaning the machine
Summary of the content on the page No. 5
Safety precautions Do not put hand into the rotating tub. It is dangerous Do not decompose, repair or alter the machine by even if the rotation speed is slow. Take special care of yourself. the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the Do not wash laundry with volatile materials kettle with hot water) on the washing machine. (such as thinner, petrol etc.). Benzene Keep the machine away from direc
Summary of the content on the page No. 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine. Outer tub cover 2.Put the inner cover component on the outer tub cover, Outer tub cover aiming the inner cover shaft to the installation hole of the shaft groove corresponding outer tub cover shaft groove. Inner cover
Summary of the content on the page No. 7
Adjust the Installation position The washing machine away from wall should be overrun 20mm. The largest allowable slope of the shank base of the machine is 1 .The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal. Adjust the adjustable leg: 1 .To twist the adjustable leg, please first lift up the side of the leg slightly, loosen the adjustab
Summary of the content on the page No. 8
Install the water inlet hose 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE: Do not over tighten. Damage to the valves can result. 2. Connect the other ends to the water inlet valve . ( As figure 2) Jointer of the water inlet hose Figure 1 Jointer of the water inlet valve Figure 2 Water absorption cushion 6
Summary of the content on the page No. 9
Check the connection between the jointer of the water inlet hose and the water tap 1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position. Take
Summary of the content on the page No. 10
1 Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 4.The ground inclination or unevenness may cause the washer operating not steadily or cause noise, please set level the washer. Pay attention to followings before washing the laundries Confirm if there's Clear the
Summary of the content on the page No. 11
3 Usage of the detergent How to use the softner The usage and dose of the softener as per the specifications of softener. Before washing put the softener into the filling entrance(can be found on When choosing the No washing powder the balancing ring by rotating the inner tub, as illustrated in the left program the usage of softener or bleacher drawing, please refer to P1 graphics) The softener will put into the is same as using detergent. washer when rinsing. After the softener is put in,
Summary of the content on the page No. 12
6 Use the operation buttons a. Description of the function of buttons Mode and meaning of the indicators Digital tube During sensing, it displays Off During operation of programs, it displays there mained time On: indicate the program about to run, or indicate the (minute) or remained times of the corresponding procedure selected mode No washing powder button Push the button to set the wash function. If "no washing powder " function is activated, the "No washing powder " indicator i
Summary of the content on the page No. 13
Start/Pause button Program selection button Water level button Reserve button Reserve/remain time indicator digitron After the power is switched on, push it to During sensing, it displays -- start the machine During reserve procedure, it displays the remained reserve time (in During working, push it to pause working. hours) During pause, push it to resume working. During operation of programs, it displays the remained time (minutes). If the remained time exceeds99 minutes, it adopts
Summary of the content on the page No. 14
b.Steps of using the operation buttons and description of the steps ime remained T (minutes) STANDARD COMMON No Washing Powder COTTON QUICK SILK POSTHASTE GENTLE JEAN Reserve Disinfect (hours later) START POWER PAUSE ON/OFF NO WASHING POWDER SOAK WASH RINSE SPIN WATER LEVEL RESERVE PROGRAM 1.Push the "POWER ON/OFF " button to switch POWER on the power. ON/OFF 2.Push the "PROGRAM" button to select suitable automatic program PROGRAM After switching on the power, the machine will set
Summary of the content on the page No. 15
After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To select other procedures, push the "soak", " wash", " rinse" or "spin" button to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you push one of the button among "wash", "rinse"and"spin", the digitron of the former procedures will turn off automatically. The former procedures will not run. For insta
Summary of the content on the page No. 16
6.Push the "RESERVE" button to select suitable reserve wash program RESERVE After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the " reserve " button to set the reserve wash program. Refer to reserve button in Page 11 for selection. Page Confirm the operation of reserve program When the "reserve" function is activated, the indicator light of the program you have set will be
Summary of the content on the page No. 17
8 Disposal after washing Please first pull off the power plug from the receptacle before cleaning. After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. If the tap water quality is bad, it can generate scale attached onto the water injection box and filling entrance of outer tub cover. When using, please scour off the scale with wiping rags dipping with an amount of detergent or abstergent to prevent
Summary of the content on the page No. 18
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle The top lid is opened during re
Summary of the content on the page No. 19
Packing list Name Quantity User's manual One Components of the One water inlet hose One (Between the upper cushion of the washing machine Bottom plate package and the upper seal of the package carton) Four Tapping screws Inner cover One component Environment-friendly One double-drive automatic washing machine 17
Summary of the content on the page No. 20
Specification 1/18L 2/24L 3/29L 4/34L 5/38L Water level/Water quantity(about) 6/42L 7/46L 8/50L 9/54L 10/59L 0.03MPa 1MPa ~ Injection pressure This washer can run for ten years (equivalent times) if using the no washing powder function and running three times weekly. After running up to the above number this washer can still be used as a common double-driver washer. 18
