Invacare Camlock Upgrade Kit 1052250 user manual

Summary of the content on the page No. 1

PATIENT LIFT
CAMLOCK UPGRADE KIT Installation, Assembly
1052250 and Operating Instructions
SAFETY SUMMARY
4. Loosen the thumb screw that secures the base shifter
The following recommendations are made for the safe
handle into the cam lock assembly at the back of the
installation of the Patient Lift Camlock Upgrade Kit. base (FIGURE 2).
5. Remove the base shifter handle (FIGURE 2).
WARNING
Check ALL parts for shipping damage and test be-
6. Lift up on the socket assembly (closed end of the

Summary of the content on the page No. 2

6. Install the new bronze washer over the cam. CAUTION Make sure the C-Clamp is securely lodged against WARNING the socket assembly and cam BEFORE removing the For proper operation of the patient lift base the camlock. camlock MUST be pointing to the RIGHT when stand- ing BEHIND the patient lift. 2. SLOWLY tighten the C-clamp and push the cam UP to release the camlock. 7. With the camlock pointing to the right, install the camlock onto the cam. 3. Remove the roll pin that secures the cam to the