American Standard Acrylic 3636 NEO user manual

Summary of the content on the page No. 1

Installation
Instructions
ACRYLIC SHOWER BASE
MODELS: 3232.ST, 3636.ST, 4242.ST, 4832.ST, 4834.ST, 6032.STLH,
6032.STRH, 6034.ST, 3636 NEO, 3838.NEO, 4242.NEO
Thank you for selecting American Standard...the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these instructions carefully
before you begin.
Certified to comply with ANSI Z124.2.
Observe local plumbing and building codes.
For alcove (.ST models) installation only:
The open

Summary of the content on the page No. 2

Insure the floor and stud walls are square and plumb. Provide a 5" x 5" (127mm x After the bedding material has been poured and 1 4 127mm) opening in the floor for the drain (see Figs. A & B). The drain plug before it sets, lower the shower base into position accom-modates a 2" (51mm) PVC waste pipe. The waste pipe should extend above with the drain assembly sliding over the waste pipe the surface of the sub-floor, refer to chart on page 2 for the required dimensions. as shown in Fig. E.