Ariens SNO-THRO 924338 ST1332LE user manual

User manual for the device Ariens SNO-THRO 924338 ST1332LE

Device: Ariens SNO-THRO 924338 ST1332LE
Category: Snow Blower
Manufacturer: Ariens
Size: 0.89 MB
Added : 6/7/2014
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Ariens SNO-THRO 924338 ST1332LE. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Ariens SNO-THRO 924338 ST1332LE.

For your convenience

If looking through the Ariens SNO-THRO 924338 ST1332LE user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Ariens SNO-THRO 924338 ST1332LE on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Ariens SNO-THRO 924338 ST1332LE to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Ariens SNO-THRO 924338 ST1332LE User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Ariens SNO-THRO 924338 ST1332LE but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Ariens SNO-THRO 924338 ST1332LE. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Sno-Thro®
Owner/Operator Manual

Models
924124 – ST926DLE
924125 – ST11528LE
924126 – ST11526DLE
924127 – ST11528DLE
924128 – ST1332LE
924335 – ST926DLE
924336 – ST11526DLE
924337 – ST11528DLE
924338 – ST1332LE
924516 – ST1332DLE
924517 – ST1336DLE
ENGLISH
FRANÇAIS
ESPAÑOL
Transfer
Coller l’autocollant du
model &
modèle et du numéro de
serial number série dans cet encadré.
label from
Transferir aquí la etiqueta
product
del modelo y número de
registration
serie del registro del
here. 0

Summary of the content on the page No. 2

Ariens Company EC DECLARATION OF CONFORMITY ISSUED BY THE MANUFACTURER DÉCLARATION DE CONFORMITÉ CE ÉMISE PAR LE FABRICANT – 655 West Ryan Street EU-ÜBEREINSTIMMUNGSERKLÄRUNG DES HERSTELLERS – P.O. Box 157 DICHIARAZIONE DI CONFORMITÀ CE RILASCIATA DAL PRODUTTORE – DECLARACIÓN DE CONFORMIDAD CE EMITIDA POR EL FABRICANTE – Brillion, Wisconsin EF-SAMSVARSERKLÆRING FRA PRODUSENTEN – 54110-0157 USA EG-DEKLARATIONEN OM ÖVERENSSTÄMMELSE UTFÄRDAD Telephone AV TILLVERKAREN – (920) 756-2141 VAL

Summary of the content on the page No. 3

Representative Measured Sound Power Level (L ) – Guaranteed Sound Power Level (L ) – wa wa Niveau de puissance acoustique représentatif mesuré Niveau de puissance acoustique garanti (L ) – wa (L ) – Repräsentativer gemessener Geräuschpegel Garantierter Geräuschpegel (L ) – Livello di potenza wa wa (L ) – Livello di potenza sonora rappresentativo rilevato sonora garantito (L ) – Nivel de potencia acústica wa wa (L ) – Nivel de potencia acústica representativo wa garantizado (L ) – Garan

Summary of the content on the page No. 4

TABLE OF CONTENTS Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Service Parts . . . . . . . . . . . . . . . . . . . . . . . 27 Controls and Features . . . . . . . . . . . . . . . 13 Accessories . . . . . . . . . . . . . . . . . . . . . . . . 27 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 14 Troubleshooting . . . . . . . . .

Summary of the content on the page No. 5

DELIVERY WARNING: Improper assembly or Customer Note: If you have purchased this adjustments can cause serious injury. product without complete assembly and instruction by your retailer, it is your 2. Understand all Safety Precautions responsibility to: provided in the manuals. 1. Read and understand all assembly 3. Review control functions and operation of instructions in this manual. If you do not the unit. Do not operate the Sno-Thro understand or have difficulty following the unles

Summary of the content on the page No. 6

SAFETY DECALS AND Never direct discharge towards persons or property that may be LOCATIONS injured or damaged by thrown ALWAYS replace missing or damaged Safety objects. Decals. Refer to figure below for Safety Decal OL0910 locations. Stop engine, remove key, read manual before making any 3 repairs, adjustments. 2 Wear appropriate hearing protection. ONLY use clean-out tool to clear blockages. NEVER use your hands. 3. DANGER! 1 OS6600 Figure 2 ROTATING PARTS! ONLY use clean-out tool

Summary of the content on the page No. 7

Keep area of operation clear of all toys, pets, Deflected materials can cause injury and and debris. Thrown objects can cause injury. property damage. Check for weak spots on docks, ramps or Always stand clear of the discharge area when floors. Avoid uneven work areas and rough operating this unit. terrain. Stay alert for hidden hazards. Fumes from engine exhaust can cause injury Avoid uneven and rough terrain. DO NOT or death. DO NOT run engine in an enclosed operate near drop-offs, ditches

Summary of the content on the page No. 8

Before cleaning, removing clogs or making NEVER fill fuel tank when engine is running or any inspections, repairs, etc.: disengage hot from operation. clutch(es), stop unit and engine, remove NEVER fill or drain fuel tank indoors. key, allow moving parts to stop. Allow hot Replace fuel cap securely and clean up spilled parts to cool. fuel. Run unit a few minutes after clearing snow to Never fill containers inside a vehicle or on a prevent freeze-up of attachment. truck or trailer bed with

Summary of the content on the page No. 9

 In case of internal contact, DO NOT Keep all hardware properly tightened. Check induce vomiting! shear bolts frequently. Before tipping unit up onto housing, remove Maintain or replace safety and instruction fuel so no spills will occur and remove battery. labels, as necessary. Ensure unit is secure and will not tip over NEVER store unit with fuel in fuel tank, inside during maintenance. a building where any ignition sources are ALWAYS keep protective structures, guards, present such

Summary of the content on the page No. 10

4 2 1 2 6 2 3 4 1 5 1 1. Mounting 3. Chute Pedestal Hardware 4. Discharge 2. Discharge Chute Ring 3 Chute OS6610 1. Handlebar 4. Speed Selector Figure 5 OS6620 Assembly 5. Bolt 2. Wing Knobs 6. Shift Rod 3. Wing Nut 1 OS3020 Figure 4 Install Discharge Chute (924124-128, 335-338, 516) Figure 5. 1. Grease underside of discharge chute ring (if not already greased). 2. Remove mounting hardware from auger housing. 3. Install discharge chute over opening in the auger housing and secure pedestal

Summary of the content on the page No. 11

Install Discharge Chute (924517) Correct Chute Clamp Orientation 1. Remove chute motor cover from chute motor (Figure 7). 2. Turn the chute gear until the solid pin is towards the rear of the unit and a threaded stud aligns with the chute motor (Figure 7). 3. Remove the six (6) nuts and two half rings Incorrect Chute Clamp Orientation (Figure 7). 4. Make sure the three (3) chute clamps on the chute gear are underneath the discharge chute flange as shown in (Figure 8) 5. Install discharge

Summary of the content on the page No. 12

Connect Battery (924516, 517) Check Function of Dual Handle Interlock 1. Remove wing nuts from battery cover. Without the engine running, press down 2. Install wire lead to battery terminal. (engage) both clutch levers. Release 3. Install battery cover and tighten wing nuts. attachment clutch lever. Attachment clutch Deflector Remote should remain engaged until traction clutch lever is released, then both clutches must 1. Remove e-ring and flat washer from stud disengage. If they do not,

Summary of the content on the page No. 13

CONTROLS AND FEATURES 1. Traction Drive Clutch Lever 1 2 4 2. Oil Fill/Dipstick 37 6 5 3. Muffler Guard 3 4. Belt Cover 7 5. Discharge Chute Deflector 6. Discharge Chute 7. Electric Chute Motor (924517) 36 8 9 8. Impeller 35 9. Clean-out Tool 34 10. Auger Gearcase 33 11. Scraper Blade 32 12. Auger 13. Recoil Starter Handle 31 14. Primer Bulb 10 15. Choke Control Knob 30 11 29 16. Throttle (Engine Stop) 17. Oil Drain Plug 28 12 18. Attachment Clutch Lever 27 19. Heated Handles 13 20. Deflector R

Summary of the content on the page No. 14

OPERATION IMPORTANT: If the belt squeals when the attachment clutch lever is engaged, the WARNING: AVOID INJURY. Read attachment drive may be frozen. Immediately and understand the entire Safety release the attachment clutch lever and move section before proceeding. the unit into a heated area to thaw. Ignition Switch (120V or 240V start on WARNING: To avoid injury to hands engine) and feet, always disengage clutches, Key Switch has two positions: shut off engine, and wait for all 1.

Summary of the content on the page No. 15

To clear the chute: Choke Control Knob 1. Shut off the engine. 1. Choke Closed position: chokes off air to engine for 2. Wait 10 seconds to be sure impeller easier start. blades have stopped rotating. 2 2. Choke Open position: 1 3. Remove the snow clean-out tool (1) from allows for normal the auger housing and use it to remove operation. the clog. IMPORTANT: Gradually 4. Replace the snow clean-out tool on the open choke after engine auger housing. starts. OS1332 Deflector Remote Throt

Summary of the content on the page No. 16

Differential Lock (924124, 126, 127, Scraper Blade 335, 336, 337, 516, 517) The scraper blade allows the back of the housing to keep better contact with the surface Differential Lock knob is located 1 being cleared. It also prevents damage to the on the Left Wheel Hub. With housing from normal wear. differential locked power is applied equally to both wheels. IMPORTANT: DO NOT allow Scraper Blade to wear too far or Auger/Impeller housing will To engage differential lock: become damaged.

Summary of the content on the page No. 17

FILLING FUEL TANK 3. Differential Lock (924124, 126, 127, 335, 336, 337, 516, 517) WARNING: AVOID INJURY. Read ALWAYS engage differential lock (located in and understand the entire Safety left wheel hub) for best traction when throwing section before proceeding. snow. Fuel Shut-Off Valve 4. Adjust Axle Lock (924125, 128, 338) IMPORTANT: The fuel shut-off valve MUST be Use the axle lock pin to lock or unlock the right in the closed position prior to transporting the wheel. Lock the right w

Summary of the content on the page No. 18

NOTE: When temperature is below -15° F IMPORTANT: DO NOT operate starter more (-26° C) additional priming may be needed. than 15 seconds per minute, as overheating and damage can occur. (If engine does not 4. If engine is cold, apply choke. See Engine start, refer to Troubleshooting.) Manual for detailed instructions. 10. Adjust choke as needed. NOTE: A warm engine requires less choking 11. Disconnect power cord from outlet, then than a cold engine. starter. 5. Set throttle to proper star

Summary of the content on the page No. 19

1. Select Speed Control position and TRAVELING direction. To travel from one work area to another: 2. Engage Attachment Clutch - Right Hand 1. Set Throttle to Slow or Part-Throttle Lever. position. 3. Engage Traction Drive Clutch - Left Hand 2. Press down on handlebars enough to Lever. raise front of unit slightly off surface. IMPORTANT: DO NOT overload unit capacity 3. Engage wheel drive clutch without by attempting to clear snow at too fast a rate. engaging attachment drive clutch. Use

Summary of the content on the page No. 20

CHECK DUAL HANDLE CHECK AUGER GEARCASE INTERLOCK IMPORTANT: Proper oil level must be maintained. Without the engine running, press down Gear cases are filled to the correct level at the (engage) both clutch levers. Release factory. Unless there is evidence of leakage, attachment clutch lever. Attachment clutch no additional lubricant should be required. should remain engaged until traction clutch Check oil level each season or every 25 hours lever is released, then both clutches must


Alternative user manuals
# User manual Category Download
1 Ariens 924 SNO-THRO 924109 User manual Snow Blower 60
2 Ariens 921006 - ST1130DLE User manual Snow Blower 52
3 Ariens 921013 - DELUXE 30 User manual Snow Blower 141
4 Ariens 921009 ST1130LET User manual Snow Blower 4
5 Ariens 924 SNO-THRO 924111 User manual Snow Blower 4
6 Ariens 921005 - ST927LE User manual Snow Blower 22
7 Ariens 924 SNO-THRO 924108 User manual Snow Blower 8
8 Ariens 921008 - ST927LET User manual Snow Blower 5
9 Ariens 921012 - DELUXE 27 User manual Snow Blower 82
10 Ariens 924071 User manual Snow Blower 2
11 Ariens 924 SNO-THRO 924327 User manual Snow Blower 0
12 Ariens 924 SNO-THRO 924330 User manual Snow Blower 11
13 Ariens 924122 - 1124 User manual Snow Blower 14
14 Ariens 924 SNO-THRO 924115 User manual Snow Blower 1
15 Ariens 924 SNO-THRO 924329 User manual Snow Blower 3
16 Agri-Fab 45-0402 User manual Snow Blower 2
17 Agri-Fab 45-0418 ATV User manual Snow Blower 1
18 Agri-Fab 45-0418 User manual Snow Blower 1
19 Alliance Laundry Systems DRYING TUMBLERS 70269501R3 User manual Snow Blower 2
20 Ariens 924 SNO-THRO 924109 User manual Snow Blower 60