Blade ICE 831.48853 user manual

Summary of the content on the page No. 1

Model No. 831.488530
User's Manual

Summary of the content on the page No. 2

Setup 1, Firmly press the thumb tab and pivot the upright up until it locks in a nearly verti- cal position. t 2. Insert the handles into the stem until the Toprevent serious Injury: lock pins are visible in the holes in the stem. •Read, understand and follow all war- Carry nlngs and instruc- 3. Open the quick-release lever. Depress the tions on the unit lock pin on the stem and slide the stem and in the manual. up until the lock pin is visible in one of the three holes in the upright. When the

Summary of the content on the page No. 3

Part List/Exploded Drawing Model No. 831.488530 No. Qt_ Desc_pfion R0700A 1 1 Deck 2 1 Head Tube 3 1 Fork 4 1 Upright 5 1 Stem 6 2 Handle 7 2 Foam Pad 8 2 Handle Cap 9 3 Lock Pin 10 1 Handle Cord 11 1 Quick Release 12 1 Upright Clamp w/Ring 13 1 Bearing Nut 14 1 Bearing Cap 15 2 Bearing 16 2 Bearing Race 26 17 2 Bushing 18 1 Pivot Union Bolt Set 19 1 Front Union Bolt Set 20 2 Rear Union Bolt Set 21 2 Wheel 22 2 Rear Wheel Spacer 23 1 Brake Spring 16. 24 1 Brake 17 25 1 Head Tube Spring 18 26 1 S

Summary of the content on the page No. 4

Adjusting The Quick-Release If the quick-release doesn't hold the stem snug in place, you will need to adjust it. Close Quick Open the quick-release lever. Turn the adjustment nut Release clockwise one half turn while keeping the lever from turn- ing. Close the lever. Repeat this procedure until the stem is held snug in place. Adjustment If the quick-release is too snug to close, you will need to Nut adjust it. While the quick-release lever is open, turn the adjustment nut counterclockwise one q