Summary of the content on the page No. 1
®
®
PR1000 Home Gym
Assembly Manual
® ® ® ® ® ®
Nautilus Bowflex Schwinn Fitness StairMaster Universal Nautilus Institute
001-7276-121508B
Summary of the content on the page No. 2
Table of Contents Apply the Cable Clip ....................................................... 15 Before Assembly ..................................................................... 2 Attach the Rod Pack ..................................................... 16 Tools ........................................................................................... 2 Chest Bar with Pulleys ................................................... 17 Important Safety Instructions .....................
Summary of the content on the page No. 3
Important Safety Instructions T h i s i c o n m e a n s a p o t en t i a l l y h a z a r do u s s i t u a t i o n w h i c h , i f n o t a v o i d e d , c o u l d r e s u l t i n d e a t h o r s er i o u s i n j u r y . Obey the following warnings: Read and understand all warnings on this machine. Carefully read and understand the Assembly Manual. • K e e p b y s t a n d er s a n d c h i l d r en a w a y f r o m t he p r o d u c t y o u a r e a s s e m b l i n g a t a l l t i m e
Summary of the content on the page No. 4
Hardware (Hardware not actual size) Qty. 4 Qty. 5 Item #1 Item #8 5/16”x 3/4” Hex Head 1/4” Washer Bolt Qty. 8 Qty. 4 Item #2 Item #9 3/8”x 3/4” Hex Head 5/16” Washer Bolt Qty. 2 Qty. 29 Item #3 Item #10 3/8”x 2 3/4” Hex Head 3/8” Washer Bolt Qty. 4 Qty. 10 Item #4 Item #11 3/8”x 3” Hex Head Bolt 3/8” Nut Qty. 2 Qty. 1 Item #12 Item #5 3/8” x 4 1/4” Hex 3/8”x 4” Hex Head Bolt Head Bolt Qty. 2 Qty. 2 Item #13 Item #6 1/4” x 1” Phillips 3/8”x 5” Hex Head Bolt Head Bolt Qty. 3 Item #7 #10 x 1
Summary of the content on the page No. 5
Parts 19 37 39 38 34 18 15 26 30 33 31 35 16 36 32 22 14 20 21 27 29 17 23 28 24 25 5 Assembly Manual
Summary of the content on the page No. 6
Parts Description Item # Qty. Item # Qty. Description 14 1 Hardware Bag 27 4 Foam Roller Pads 28 1 Short Roller Tube 15 1 Pair Handgrips 16 1 Bench 29 1 Long Roller Tube 17 1 Base Platform 30 1 Exercise Placard 18 1 Lat Cross Bar 31 1 Rod Box End Plate 19 1 Upper Lat Tower 32 1 Manual Kit 33 4 End Caps 20 1 Sliding Seat 34 4 Clips 21 1 Lower Lat Tower 22 1 Chest Pulley Cross Bar 35 1 Threaded Knob 23 1 Seat Rail with Slider 36 1 Seat Slider 24 1 Leg Extension 37 1 Leg Press Belt 25 1 Leg Extensi
Summary of the content on the page No. 7
Assembly Step 1: Attach the Lower Lat Tower to the Base Parts • Base Platform (#17) • Lower Lat T ower (#21) Hardware • (2) 3/8” x 3/4” Hex Head Bolts (#2) • (2) 3/8” W ashers (#10) Tools • Adjustable W rench (not included) 1-1 Attach the Lower Lat Tower to the Base Platform with first set of bolts. Note: Do not tighten hardware. 21 2 10 17 7 Assembly Manual
Summary of the content on the page No. 8
Assembly Step 2: Secure the Upper Lat Tower to the Base Parts • Completed Assembly (from step 1) Hardware • (2) 3/8” x 4” Hex Head Bolts (#5) • (4) 3/8” W ashers (#10) • (2) 3/8”Nuts (#11) Tools • (2) Adjustable W renches (not included) 2-1 Install the second set of bolts and tighten all of the hardware. 11 10 10 5 8 Assembly Manual
Summary of the content on the page No. 9
Assembly Step 3: Assemble the Seat Rail Parts • Seat Rail (#23) • Seat Cushion (#20) • Seat Slider (#36) Hardware • (4) 5/16” x 3/4” Hex Head Bolts (#1) • (4) 5/16” W ashers (#9) • (1) Rubber Pad (#38) Tools • Adjustable W rench (not included) 3-1 Slide the Seat Slider onto the Seat Rail. Note: The threaded hole on the end of the Seat Rail must face upward. 3-2 Attach the Seat Cushion to the Seat Slider with the Hex Head Bolts and Washers. Tighten hardware. 3-3 Apply the Rubber Pad to t
Summary of the content on the page No. 10
Assembly Step 4: Assemble the Leg Extension Parts • Leg Extension (#24) • Leg Extension Cross T ube (#25) Hardware • (2) 3/8” x 3” Hex Head Bolt (#4) • (4) 3/8” W ashers (#10) • (2) 3/8” Nut (#11) Tools • (2) Adjustable W renches (not included) 4-1 Set the bracket end of the Leg Extension onto the Leg Extension Tube and align the bolt holes. 4-2 Install and tighten the hardware. Note: Do not unwrap the cable from the pulley . 24 11 10 4 25 10 Assembly Manual
Summary of the content on the page No. 11
Assembly Step 5: Attach the Seat Rail to the Leg Extension Parts • Seat Rail Assembly (from step 3) • Leg Extension Assembly (from step 4) Hardware • (2) 3/8” x 2 3/4” Hex Head Bolt (#3) • (3) 3/8” W ashers (#10) • (1) 3/8” Nut (#11) Tools • (2) Adjustable W renches (not included) 5-1 Align the bolt holes of the Seat Rail Assembly with the bolt holes in the Leg Extension Assembly. 5-2 Install and tighten the hardware. Note: Do not unwrap the cables from the pulleys. 10 11 3 10 11 Assembly
Summary of the content on the page No. 12
Assembly Step 6: Attach the Seat Rail to the Base Assembly Parts • Seat Rail Assembly (from step 5) • Completed Assembly (from step 2) Hardware • (1) 3/8” x 4 1/4” Hex Head Bolt (#12) • (2) 3/8” W ashers (#10) • (1) 3/8” Nut (#11) • (1) Threaded Knob (#35) Tools • (2) Adjustable W renches (not included) 6-1 Insert the Seat Rail Assembly into the Lower Lat Tower Assembly. 6-2 Install and tighten the hardware. 35 12 10 10 11 12 Assembly Manual
Summary of the content on the page No. 13
Assembly Step 7: Upper Lat Tower Parts • Upper Lat T ower • Lat T ower Cross Bar with Pulleys and Cables Hardware • (2) 3/8” x 3” Hex Head Bolt (#4) • (4) 3/8” W ashers (#10) • (2) 3/8” Nut (#11) Tools • (2) Adjustable W renches (not included) 7-1 Align the Lat Tower Cross Bar bolt holes with the bolt holes in the Upper Lat Tower bracket. 7-2 Install and tighten the hardware. Note: Do not unwrap the cables from the pulleys. 11 10 10 4 13 Assembly Manual
Summary of the content on the page No. 14
Assembly Step 8: Attach the Upper Lat Tower to the Base Assembly Parts • Upper Lat T ower Assembly (from step 7) • Completed Assembly (from step 6) Hardware • (6) 3/8” x 3/4” Hex Head Bolt (#2) • (6) 3/8” W ashers (#10) Tools • (2) Adjustable W renches (not included) 8-1 Insert the Upper Lat Tower Assembly into the Lower Lat Tower. 8-2 Install and tighten the hardware. 10 2 14 Assembly Manual
Summary of the content on the page No. 15
Assembly Step 9: Apply the Cable Clip Parts • (1) Cable Clip (#39) • Completed Assembly (from step 8) 9-1 Apply the Cable Clip to the rear of the Lower Lat Tower. Note: Be sure to use the cable clip when the cables are not in use. 6” (15.25cm) 39 15 Assembly Manual
Summary of the content on the page No. 16
Assembly Step 10: Attach the Rod Pack Parts • Completed Assembly (from step 9) • (1) Bowflex® Rod Pack (#26) • (1) Rod Box End Plate (#31) Hardware • (3) #10 x 1” Self T apping Screws (#7) • (2) 1/4” x 1” Phillips Head Bolt (#13) • (5) 1/4” W ashers (#8) Tools • Phillips Head Screw Driver 10-1 Slide the Bowflex® Rod Pack into the Rod Pack Holder. 10-2 Install and completely tighten the hardware. Note: Make sure that the hardware is tightly secured. 26 31 8 13 8 7 16 Assembly Manual
Summary of the content on the page No. 17
Assembly Step 11: Chest Bar with Pulleys Parts • Completed Assembly (from step 10) • Chest Bar with Pulleys and Cables (#22) Hardware • (2) 3/8” x 5” Hex Head Bolts (#6) • (4) 3/8” W ashers (#10) • (2) 3/8” Nuts (#11) Tools • (2) Adjustable W renches (not included) 11-1 Attach the Chest Bar with Pulleys and Cables to the Lower Lat Tower. 6 10 11 22 17 Assembly Manual
Summary of the content on the page No. 18
Assembly Step 12: Leg Extension Rollers Parts • (4) Foam Roller Pads (#27) • (4) T ube End Plugs (#33) • (1) Long Roller T ube (#29) • (1) Short Roller T ube (#28) • Completed Assembly (from step 11) 12-1 Insert the Roller Tubes through the Leg Extension. 12-2 Slide the Foam Rollers onto the Roller Tubes. 12-3 Plug the Roller Tube ends with the Tube Ends Plugs. 33 27 29 28 18 Assembly Manual
Summary of the content on the page No. 19
Assembly Step 13: Attach the Bench Parts • Bench Cushion (#16) • Completed Assembly (from step 12) 13-1 Put the Bench Cushion onto the Seat Rail and the Seat Slider. 16 19 Assembly Manual
Summary of the content on the page No. 20
Assembly Step 14: Attach Placard Parts • Exercise Placard (#30) • Completed Assembly (from step 13) 14-1 Snap the Excercise Placard onto the upper Lat Tower. 30 20 Assembly Manual
