Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Cultivator TABLE OF CONTENTS DESCRIPTION PAGE WARRANTY................................................................ 1 INTRODUCTION ......................................................... 2 SAFETY....................................................................... 3 Safety.....................................................................3 General Safety ..
Summary of the content on the page No. 4
Cultivator WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange, a
Summary of the content on the page No. 5
Cultivator INTRODUCTION The Buhler Farm King Cultivator features a solid welded frame construction with 2” x 2” x .250 wall tubing. There is a simple one bolt shank allowing for easy spacing adjustment. “S” tines are forged steel and feature reversible points. Optional gauge wheels and a 7” sweep are also available. This product is Quick Hitch compatible. Keep this manual handy for frequent reference. All
Summary of the content on the page No. 6
Cultivator SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death
Summary of the content on the page No. 7
Cultivator GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear. This list may include but is not limited to: - hard hat - protective shoes with slip resistant soles - protective glasses or goggles - heavy gloves - wet weather gear - hearing
Summary of the content on the page No. 8
Cultivator SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it. Follow good shop practices including: - keep service area clean and dry - be sure electrical outlets and tools are properly grounded - use adequate light for
Summary of the content on the page No. 9
Cultivator ASSEMBLY S-TINE SPACING Each cultivator main frame is divided up into 3 sections by two braces. Space tines equally within these sections. 6
Summary of the content on the page No. 10
Cultivator OPERATION THEORY OF OPERATION REVERSIBLE POINT REPLACEMENT OR REVERSAL: 1. Raise the Cultivator off the ground. 2. Securely block up the frame 3. Remove the Plow Bolts as required. 4. If the top side of the reversible point has not been used, reverse and reattach. If it has been used, replace reversible point. 5. Install plow bolts and re-tighten. 6. Replace points if the tips are badly wor
Summary of the content on the page No. 11
Cultivator MAINTENANCE 8
Summary of the content on the page No. 12
Cultivator 9
Summary of the content on the page No. 13
Cultivator WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. Cultivator Item Part # Description 1 906795 60'' Frame Weldment 906796 72'' Frame Weldment 906797 84'' Frame Weldment 2 F0351 Hitch Weld
Summary of the content on the page No. 14
Cultivator SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions, and Quantities for each Kit. QUANTITY BUNDLE NO. DESCRIPTION Y60FC 60” CULTIVATOR 1 F0351 Hitch 1 F0372 Frame 60” 1 F6510 Tines 1 F0379 Carton of Parts Y607FC 60” CULTIVATOR w/gauge wheel and sweeps
Summary of the content on the page No. 15
Cultivator SHIPPING KIT AND BUNDLE NUMBERS – cont’d. Y847FC 84” CULTIVATOR w/gauge wheel and sweeps 1 F12 Gauge Wheel 1 F0351 Hitch 1 F0374 Frame 84” 1 F6516 Tines 1 F0381 Carton of Parts 1 F6591 7” Sweeps The following is a list of options available for the Kits listed above. F11 7” Sweep 967549 Reversible Points F12 Gauge Wheel 12
Summary of the content on the page No. 16
NOTES
Summary of the content on the page No. 17
NOTES
Summary of the content on the page No. 18
NOTES
Summary of the content on the page No. 19
Summary of the content on the page No. 20
DIVISION LOCATIONS U.S. WAREHOUSES AR, West Memphis Farm King Division (870) 732-3132 ND, Fargo 301 Mountain Street S. (701) 282-7003 Morden, MB R6M 1X7 GA, Stone Mountain (770) 908-9439 NE, Blair Ph.: (204) 822-4467 (402) 426-8211 Fax: (204) 822-6348 ID, Meridian (208) 887-6006 OH, Youngstown Allied/Inland Division (330) 793-0862 IN, Clarksville 1260 Clarence Avenue (812) 284-3376 OR, Beaverton Winnipeg, MB R3T 1T2 (503) 641-1865 Ph.: (204) 284-6100 KS, W
