Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Swath Roller TABLE OF CONTENTS DESCRIPTION PAGE Warranty ..................................................................... 1 Introduction................................................................ 2 SAFETY....................................................................... 3 Safety................................................................ 3 General Safety..................................................3
Summary of the content on the page No. 4
Swath Roller WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange, at Buhler Manufacturing’s option, of a
Summary of the content on the page No. 5
Swath Roller INTRODUCTION Buhler Farm King brings you this all-steel swath roller in eight and ten food models. Compress your canola and flax swath to prevent crop loss by wind scattering. Ground clearance is easily adjusted with a crank at both ends. Hook Hook up to your swather with the swivel hitch…and take your mind off the wind. Keep this manual handy for frequent reference. All new operators or owners must review the manual before using the e
Summary of the content on the page No. 6
Swath Roller GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear. This list may include but is not limited to: - hard hat - protective shoes with slip resistant soles - protective glasses or goggles - heavy gloves - wet weather gear - hearing protection - respirator or filter ma
Summary of the content on the page No. 7
Swath Roller SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it. Follow good shop practices including: - keep service area clean and dry - be sure electrical outlets and tools are properly grounded - use adequate light for the job Use only tools, jacks
Summary of the content on the page No. 8
Swath Roller SWATH ROLLER 5
Summary of the content on the page No. 9
Swath Roller ASSEMBLY 1. Center the drum shaft (#2) in the drum (#1) and tighten in place using the set screws supplied in the hubs at the ends of the drum. 2. Slide the right and left side frames (#7) and (#8) onto the drum shaft with the side frames turned as shown in drawing. 3. Assemble the cross brace (#3) between the two side frames. Do not tighten the clamp bolts until after the bearings on the side frames have the collars locked in place. N
Summary of the content on the page No. 10
Swath Roller MAINTENANCE 7
Summary of the content on the page No. 11
Swath Roller 8’ SWATH ROLLER 8
Summary of the content on the page No. 12
Swath Roller WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 8' SWATH ROLLER ITEM PART # DESCRIPTION 1 F6500 Drum Weldment 2 967501 Drum Shaft Weldment 3 967585 Cross-Brace 4 909958 Hitch Weldment 5 967504 Hitch Clamp (20") 6 9
Summary of the content on the page No. 13
Swath Roller 34 84050 3/4" S.A.E. Flat Washer (pl) 35 9812433 3/16" x 1 1/2" Cotter Pin (pl) 36 812026 5/16" x 1" Hex Bolt (pl) 37 81568 5/16" Hex Nut (pl) 38 81569 5/16" Lock Washer (pl) 39 81598 7/16" x 1 1/4" Hex Bolt (pl) 40 967900 1/4" Grease Fitting 41 81592 3/8" Hex Nut (pl) 42 F7110 15" x 4.5" x 4-Bolt Wheel 43 81549 5/16" x 3/4" Hex Bolt (pl) 44 909277 Manual Holder 45 84467 3/4" Hex Bolt (pl) 46 812365 3/4" Lock Nut (pl) 47 F0420 1
Summary of the content on the page No. 14
Swath Roller 10’ SWATH ROLLER 10' SWATH ROLLER ITEM PART # DESCRIPTION 1 F6551 Drum Weldment 2 967577 Drum Shaft Weldment 3 967589 Cross-Brace 4 909959 Hitch Weldment 5 967504 Hitch Clamp 6 967505 Crank 7 901146 Right Side Frame 8 901147 Left Side Frame 9 967508 Slider Bracket 10 961792 1" Pillow Bearing 11
Summary of the content on the page No. 15
Swath Roller 11 81599 7/16" x 1 1/2" Hex Bolt (pl) 12 981616 7/16" BS Flat Washer (pl) 13 81615 7/16" Lock Washer (pl) 14 81614 7/16" Hex Nut (pl) 15 812338 7/16" x 3" Hex Bolt (pl) 16 86273 7/16" Lock Nut (pl) 17 961891 Oil Seal (SE11) 18 967712 Inner Bearing Cone (LM67048) 19 967711 Inner Bearing Cup (LM67010) 20 105173 4-Bolt Hub with Cups 21 968404 1/2" Wheel Bolt 22 968405 Outer Bearing Cup (LM11910) 23 968406 Outer Bearing Cone (LM11949
Summary of the content on the page No. 16
Swath Roller SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions, and Quantities for each Kit. QUANTITY BUNDLE NO. DESCRIPTION C800SR 8’ SWATH ROLLER: 1 F6500 Drum Weldment 1 F0897 Frame Bundle 1 F0924 Hitch, Shaft, Brace Bundle 2 F7110 Wheel 15” 1 F0926 Carton of Parts C1000SR 10’ SWATH ROLLER: 1 F6551 Drum Weldment 1 F0925 Hitc
Summary of the content on the page No. 17
NOTES
Summary of the content on the page No. 18
NOTES
Summary of the content on the page No. 19
Summary of the content on the page No. 20
DIVISION LOCATIONS U.S. WAREHOUSES AR, West Memphis Farm King Division (870) 732-3132 ND, Fargo 301 Mountain Street S. (701) 282-7003 Morden, MB R6M 1X7 GA, Stone Mountain (770) 908-9439 NE, Blair Ph.: (204) 822-4467 (402) 426-8211 Fax: (204) 822-6348 ID, Meridian (208) 887-6006 OH, Youngstown Allied/Inland Division (330) 793-0862 IN, Clarksville 1260 Clarence Avenue (812) 284-3376 OR, Beaverton Winnipeg, MB R3T 1T2 (503) 641-1865 Ph.: (204) 284-6100 KS, Wichita Fax: (204) 477-2325 (3
