Grizzly T25554/T25555 user manual

Summary of the content on the page No. 1

MODEL T25554/T25555
EXTENSION BLOCK KIT
INSTRUCTIONS
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction Cleanup
t his extension Block Kit increases the maximum
t he unpainted surfaces of the extension block are
cutting height of the Model g 0555l X/g 0555lanv
coated with a heavy-duty rust preventative that
14" bandsaw from 6" to 12".
prevents corrosion during shipment and storage.
t he t 25554 matches the black color scheme

Summary of the content on the page No. 2

6. install the riser block and replace the upper 5 arm, as shown in figure 3, using (1) ⁄8"-11 1 5 x 8 ⁄2" hex bolt, (2) ⁄8" flat washers, and (1) To reduce risk of shock or 5 ⁄8"-11 hex nut. accidental startup, always disconnect machine from Note: Make sure the arrow on the riser block power before adjustments, points up and faces behind the machine. maintenance, or service. Also, make sure alignment pins fit completely into holes during installation. Installing Riser Block 1. disCon

Summary of the content on the page No. 3

10. remove the guide post control knob and lock 17. replace the lock collar and guide post control collar (figure 4) from the pinion gear shaft. knob. 11. push the pinion gear shaft inward to disen- 18. attach the guide assembly and the extended gage the gear from the rack (see figure 5). blade guard to the guide post. 1 19. attach the cord clamp using (1) 10-24 x ⁄2" pinion gear phillips head screw (see figure 7), and disengaged replace the power switch assembly and dou- ble cord clamp rem

Summary of the content on the page No. 4

Riser Block parts Breakdown 7 9 11 1 2 12 13 4 6 5 8 10 15 14 2 3 T25554 parts List T25555 parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PB120 HEX BOLT 5/8-11 X 8-1/2 1 PB120 HEX BOLT 5/8-11 X 8-1/2 2 PW14 FLAT WASHER 5/8 2 PW14 FLAT WASHER 5/8 3 PN04 HEX NUT 5/8-11 3 PN04 HEX NUT 5/8-11 4 PT25555004 SOLID PIN 6 X 15 4 PT25555004 SOLID PIN 6 X 15 5 PT25555005 SAW BLADE 6 TPI X 105 X 3/8 5 PT25555005 SAW BLADE 6 TPI X 105 X 3/8 6 PT25555006 LEFT-SIDE BLADE GUARD 6 PT25555006 LEFT-