Summary of the content on the page No. 1
MULTI PURPOSE
Before you begin reading this information, please unfold the page with the illustrations
PRECISION ROTARY TOOL
and familiarize yourself with all functions of the tool.
PFBS 9,6 V
MULTI PURPOSE PRECISION
GB / IE / CY Operating and safety instructions Page 5
ROTARY TOOL
Operating and safety instructions
Kompernaß GmbH
Burgstraße 21
D-44867 Bochum (Germany)
Last Information Update:
10 / 2007 · Ident.-No.: PFBS 9,6 V-102007 - 6
Summary of the content on the page No. 2
6 7 1 2 3 5 4 11 A B C 23 12 8 22 13 21 14 20 15 9 19 16 10 18 17 D E F G H I
Summary of the content on the page No. 3
Table of content Introduction For your safety ..............................................................................................................Page 6 Proper use .....................................................................................................................Page 6 Features and equipment ...............................................................................................Page 6 Included items ...........................................................
Summary of the content on the page No. 4
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Watts (Effective power) W Observe caution and safety notes! Wear protective gloves and safety goggles Caution – electric shock! Safety class II Dangerous electric current – danger to life! Amp-hours (Battery capacity) Proper procedure and handling. Ah Keep children and other unauthorised personnel Rated idle running speed n at a safe distance when using electrical tools. 0 Damaged
Summary of the content on the page No. 5
Introduction / Safety 6 Spigot nut Battery charger PFBS 9.6-1: 7 Spindle lock Primary: Rated voltage: 230 V 50 Hz ~ Battery charger (see Fig. A): Rated output: 8.5 W 8 Charging cradle with connector Secondary: 9 Mains adapter Rated voltage: 12 V DC 10 LED Charging current: 400 mA Charging duration: approx. 3 hours Accessories (see Fig. B): Protection class: II / & 11 6 HSS drills 12 2 Mandrels for mounting tools Noise and Vibration Informationen: 13 3 Polishing wheels Determined noise level
Summary of the content on the page No. 6
Safety / Operation T o avoid danger to life from J W hen you use the drill / grinder wear electric shock: the following protective equipment: safety glasses and protective gloves. J A damaged dr ill / grinder, mains lead or plug presents a serious dan- To work safely: ger to life from electric shock. Check the condition of the drill / grinder, charger, mains lead, mains plug and battery pack at frequent J Before cleaning or maintaining the charger or intervals. Do not use a drill /
Summary of the content on the page No. 7
Operation J Swit ch the charger off for at least 15 minutes using the open spanner end of the between successive charging processes. To do combination tool 23. this pull the mains plug (mains adapter 9 ) out Note: Use the screwdriver end of the of the socket. combination tool 23 to release or tighten the screw of the mandrels 12. Q I nserting / removing the Q battery pack into / out of the Swit ching on and off / Setting drill / grinder the speed range Inserting the battery pack:
Summary of the content on the page No. 8
Operation Setting the appropriate speed Symbols on Material On / off 1 switch 0 (Drill / grinder switched off) 6 Softwood, metal Plastics and low melting Hardwood 2 8 point materials 4 Stone, Ceramics 10 Steel Examples of appropriate tool selection Function Function Accessory Application 11 Drilling wood (see Fig. C) Drilling HSS drill Milling Milling bits 20 Various tasks, e.g. hollowing out, gouging, shaping, grooving or slotting Engraving Engraving bits 21 Markings (see Fig. D) 15 De
Summary of the content on the page No. 9
Operation / Maintenance and cleaning / Disposal / Information Q Q Tips and tricks Information If you use press too hard you run the risk of break- Q ing the tool or damaging the workpiece. You will Service achieve the best results by operating the tool at a constant rotational speed and using a low contact Please see the warranty documents for details of pressure on the workpiece. the Service Office responsible for your country. Q Q Maintenance and cleaning Manuf acturer’s Declaration of
Summary of the content on the page No. 10
12
