Summary of the content on the page No. 1
All I Want To Be
Keith LuBrant
1:03 -2:30
Now Playing
Model iH120
Alarm Clock For Your iPod
Questions? Visit www.ihomeaudio.com
Summary of the content on the page No. 2
Table of Contents 1 Quick Start 2 Controls and Indicators 3 iH120 Display 3 Install Clock Backup Battery 4 Using The Remote Control Unit Install/Replace the Remote Control Battery To check for iPod compatibility 5 Setting Up the iH120 Setting Time and Calendar 6 Using the Alarm 6 Charging your iPod 7 Listening to iPod 7 Listening to non-docking iPod or other portable audio devices 7 Dimmer Operation 8 Sleep Operation 8 Click Sound Operation 9 A Consumer Guide to Product Safety 10 Trouble Shoot
Summary of the content on the page No. 3
A Consumer Guide to Product Safety This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in
Summary of the content on the page No. 4
Quick Start 1:power 2:inserts 3:iPod Select the dock insert for your Attach AC adaptor cable to DC jack Insert iPod into dock with proper insert on back of the iH120 and plug the iPod model from the table below (iPod must not be in a skin or case). other end into a wall socket. and place insert in dock. iPod will charge while docked. Press the Never dock an iPod without Play Button on the iH120 to play iPod. an insert in place. thin iPod with video (30 GB) iPod touch 2G nano 4G Use this
Summary of the content on the page No. 5
Controls and Indicators Top panel iPod Dock << Button iPod Play/Pause Button >> Button Alarm-1 Button Alarm Reset / Alarm-2 Button Power Button Volume + Button Wake-to Button Volume - Button Sleep Button Snooze/Dimmer Button Back panel Front panel Clock Adj Button Time Zone Button DST Switch Line-in JACK 2
Summary of the content on the page No. 6
iH120 Display Alarm 1 Indicator Alarm 2 Indicator Daylight Saving Time iPod Indicator Indicator Wake-to Indicator Battery Low Indicator Wake-to Buzzer Indicator PM Indicator Time Display (PM) Alarm Time Indicator Alarm Time Indicator Sleep Indicator Install Clock Backup Batteries The iH120 uses 2 alkaline “AA” batteries to provide continuous alarm operation and clock settings in the event of a power failure. If the backup batteries have been installed and a power failure occurs or the AC cord
Summary of the content on the page No. 7
Using the Optional Remote Control Power Button turns unit OFF or Reset Alarm. Volume Buttons raise and lower volume on the unit. Pressing FWD/REW while iPod is inserted will FWD/REV to next/previous track Pressing and holding FWD/REW while iPod is docked will scan forward/reverse within currently playing track. Pressing Play/Pause from power off mode will play iPod. Pressing Play/Pause while iPod is docked and playing will pause iPod. Press again to resume play. Pressing the sleep mode functi
Summary of the content on the page No. 8
Setting Up the iH120 This unit is a PRESET Clock: the clock is preset for the correct Eastern Standard Time at the factory. Please follow the steps below to match settings to your location. 1. Depending on your location and whether or not Daylight Saving Time (DST) is in effect, set the DST Switch located on the back of the unit to +1 to add 1 hour or to -1 to subtract 1 hour. When set to +1 a DST icon will appear on the display, indicating DST mode. 2. Press and hold the Time Zone Button loc
Summary of the content on the page No. 9
Using the Alarms Setting the Alarms 1. Press and hold the or Button until the alarm icon and alarm time blink. Press the or Button to set the alarm time. Holding the button for a few seconds will advance or reverse rapidly. Remember to set the correct AM or PM time. 2. Press the Wake-to Button to select iPod or Buzzer alarm source. You can set different alarm sources for each alarm. The wake to icon will blink for 5 seconds, followed by the alarm icon and time. 3. Press
Summary of the content on the page No. 10
Listening to iPod 1. Dock the already playing iPod. The iH120 will automatically turn on and you will hear the music playing from your iPod. Note: If the playing song/music loudness is too low on the iPod itself, iH120 may not detect iPod is in play mode. Press the Play/Pause Button on main unit or remote control twice to play it. 2. When the iPod is docked and in standby mode, press the Button on the iH120 or on the remote control to play it. The iPod Icon will appear on the display, s
Summary of the content on the page No. 11
Sleep Operation Sleep mode lets you sleep to your iPod, gradually lowering the volume until the unit shuts off at the selected time. 1. Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate the unit is in sleep mode. The unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep feature which gradually lowers the volume 15 seconds before auto power off. 2. You can adjust the sleep timer from 120, 90, 60, 30 or 15 minutes
Summary of the content on the page No. 12
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should n
Summary of the content on the page No. 13
Trouble Shooting Symptom Possible Problem Solution Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or Plug the AC adaptor into a wall outlet and plug the connector into (no power) the connector is not plugged into the power the power supply jack on the unit supply jack on the back of the unit Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPod cannot dock Using no or wrong iPod insert Make sure the dock insert is the prop
Summary of the content on the page No. 14
Solución De Problemas Síntoma Posible Problema Solución La unidad no El adaptador de AC no está conectado al Conecte el adaptador de AC al tomacorriente y también funciona (no circula tomacorriente o el conector no está conectado conecte el conector a la ficha en la parte posterior de la unidad corriente eléctrica) a la ficha en la parte posterior de la unidad El tomacorriente no funciona Coloque otro aparato en ese mismo tomacorriente para confirmar si el que no funciona es el tomacorriente
Summary of the content on the page No. 15
Limited 90-Day Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service stil
