Summary of the content on the page No. 2
1. SAFETY AND WARRANTY INFORMATION It is the sole responsibility of the purchaser of LIFE FITNESS products to read the owner’s manual, warning labels and instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use. LIFE FITNESS recommends that all commercial fitness equipment be used in a supervised a
Summary of the content on the page No. 3
1. Safety and Warranty Hammer Strength Linear Leg Press Owners Manual SPECIFIC OPERATING WARNINGS 1. Routinely inspect all accessory clips that join attachments to the cables and replace at the first sign of wear. 2. Use only weight selector pins supplied by LIFE FITNESS on weight stacks. Substitutes are forbidden. 3. Cables pose an extreme liability if used when frayed. Always replace any cable at first sign of wear (consult LIFE FITNESS if uncertain). 4. Do not allow users
Summary of the content on the page No. 4
1. Safety and Warranty Hammer Strength Linear Leg Press Owners Manual WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (HSLLP) is warranted to be free of all defects in material and workmanship. WHO IS COVERED The original purchaser or any person receiving the Product as a gift from the original purchaser. WHO PAYS TRANSPORTATION & INSURANCE FOR SERVICE If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness, will
Summary of the content on the page No. 5
1. Safety and Warranty Hammer Strength Linear Leg Press Owners Manual HOW TO GET PARTS & SERVICE Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located or advise you on how and where to ship the Product for se
Summary of the content on the page No. 6
1. Safety and Warranty Hammer Strength Linear Leg Press Owners Manual Found at moving parts 1-5
Summary of the content on the page No. 7
2. GENERAL SPECIFICATIONS 1. Frame Construction • Frame is constructed of mechanical quality steel purchased in mill run quantities • Frame is primarily 2” x 4” and 2” x 3” rectangular tubing with 11 gauge wall thickness. Frames are fully welded and bolt together for maximum structural integrity and minimum maintenance when possible. However, larger machines have bolt- together configuration to facilitate movement through smaller doorways and difficult installations 2. Frame Fini
Summary of the content on the page No. 8
2. Specifications Hammer Strength Linear Leg Press Owner’s Manual 9. Hand Grips • Handgrips are an extruded 60-durometer-thermorubber compound that is non- absorbing, wear and tear resistant and exhibits good dry and wet frictional characteristics. • The grips are retained with aluminum collars which eliminates the tendency of the grip to slide off the handle. 10. Seat Adjustments • Seat and pad adjustments correctly align body to mach
Summary of the content on the page No. 9
3. MACHINE SPECIFICATIONS Product Specifications Linear Leg Press Product # - HSLLP Machine Weight: 630 lbs 285 kg Load Rating: 1,800 lbs 816 kg Max User Weight: 300 lbs 136 kg Size: in. = 95”L x 65"W x 57”H cm =241L x 165W x 145H Live Area: in. = 113”L x 89”W x 57”H cm =287L x 226W x 145H • Linear bearings create a smooth feel and function throughout the life of the product. • Flip-in, flip-out racking mechanism is intuitive and easy to use
Summary of the content on the page No. 10
4. MAINTENANCE PROCEDURES ACTION DAILY MONTHLY BI-ANNUALLY YEARLY AS NEEDED CLEAN Upholstery X Guide Rods X Shields X Hand Grips X Frames (Wax) X INSPECT Hardware X Frame X Hand Grips X Paint X LUBRICATE Guide Rods X CLEAN • Upholstery with a mild soap and water. • Guide rods with a cotton cloth and break-free. • Hand grips with mild soap and water. • Wax frames with a standard, non-abrasive, wax finish. IN
Summary of the content on the page No. 11
5. Maintenance Hammer Strength Linear Leg Press Series Owners Manual LUBRICATE • Guide rods with Silicone Compound (part number 3238401). Apply the lubricant to a cotton cloth, then run the cotton cloth up and down the guide rods as needed. ONCE A DAY • Wipe down upholstery with a mild soap and water or comparable all purpose cleaner. • Visually inspect cables for wear at and around connections and along entire length of cable. Always replace at first sign of wear. ONCE A WEE
Summary of the content on the page No. 1
Hammer Strength Linear Leg Press
Owners Manual
Part Number 8344901
Rev. A-1
