McCulloch MC900 user manual

User manual for the device McCulloch MC900

Device: McCulloch MC900
Category: Tiller
Manufacturer: McCulloch
Size: 0.8 MB
Added : 7/1/2013
Number of pages: 20
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for McCulloch MC900. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with McCulloch MC900.

For your convenience

If looking through the McCulloch MC900 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual McCulloch MC900 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual McCulloch MC900 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
McCulloch MC900 User manual - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual McCulloch MC900 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to McCulloch MC900. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MC900
Operator's Manual / 96083000400 / 2009-11
532 43 21-09

Summary of the content on the page No. 2

SAFETY RULES Safe Operation Practices for Walk-Behind Powered Ro ta ry Tillers • Keep children and pets away. TRAINING • Read the Owner’s Manual care ful ly. Be thor ough ly • Do not overload the machine capacity by attempting fa mil iar with the controls and the proper use of the to till too deep at too fast a rate. equip ment. Know how to stop the unit and disengage • Never operate the machine at high speeds on slippery the controls quickly. surfaces. Look behind and use care when backing.

Summary of the content on the page No. 3

CUSTOMER RESPONSIBILITIES PRODUCT SPECIFICATIONS • Read and observe the safety rules. Gasoline Capacity: 3 Quarts (2.8L) • Follow a regular schedule in maintaining, caring for Unleaded Reg u lar and using your tiller. Oil (API-SG-SL): SAE 30 (Above 32°F) • Follow instructions under “Maintenance” and “Stor age” (Capacity: 16 oz./0.47 L) SAE 5W-30 (Below 32°F) sections of this Manual. Spark Plug : NGK-BPR6ES IMPORTANT: THIS UNIT IS EQUIPPED WITH AN INTERNAL (Gap: .030"/0.76mm) TOR

Summary of the content on the page No. 4

ASSEMBLY Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY FRONT A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) Utility knife (2) 1/2" wrenches LEFT RIGHT OPERATOR’S POSITION (S

Summary of the content on the page No. 5

depth_stake_4 ASSEMBLY UNPACK CARTON & INSTALL HANDLE INSTALL DEPTH STAKE ASSEM BLY (See Fig. 2) (See Fig. 3) • Loosen nut “A”. CAUTION: Be careful of exposed • Insert stake support between engine brack et halves sta ples when handling or disposing with stake spring down. of cartoning material. • Bolt stake support to engine brackets with bolts, lock washers and nuts. Tight en se curely. Tighten nut “A”. IMPORTANT: WHEN UNPACKING AND AS SEM BLING TILLER, BE CAREFUL NOT TO STRETCH OR

Summary of the content on the page No. 6

OPERATION KNOW YOUR TILLER READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your Tiller or in literature supplied with the product. Learn and understand their mean- ing. Forward Tine Control Fuel Fill Port Throttle Control Fuel Valve Choke Control Depth On/Off Switch Stake Recoil Starter H

Summary of the content on the page No. 7

depth_stake_4 OPERATION The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses. TILLING HOW TO USE YOUR TILLER The speed and depth of tilling is regulated by the position Know how to operate all controls before adding fuel and oil of the depth stake and

Summary of the content on the page No. 8

OPERATION TO TRANSPORT CAUTION: Fill to within 1/2 inch of top of fuel tank to prevent spills and to allow CAUTION: Before lifting or trans port ing, for fuel expansion. If gasoline is ac- allow tiller engine and muffler to cool. ci den tal ly spilled, move machine away Disconnect spark plug wire. Drain from area of spill. Avoid creating any gasoline from fuel tank. source of ignition until gasoline vapors have disappeared. AROUND THE YARD Wipe off any spilled oil or fuel. Do not

Summary of the content on the page No. 9

OPERATION Fuel Valve • Soil conditions are important for proper tilling. Tines will Spark Plug not readily penetrate dry, hard soil which may con trib ute to excessive bounce and difficult handling of your tiller. Hard soil should be mois tened before tilling; however, Throttle Control extremely wet soil will “ball-up” or clump during tilling. Wait until the soil is less wet in order to achieve the best results. When tilling in the fall, remove vines and Choke long grass to prevent them

Summary of the content on the page No. 10

MAINTENANCE MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE SERVICE DATES REGULAR SERVICE Check Engine Oil Level Change Engine Oil Oil Pivot Points Inspect Spark Arrester / Muffler Inspect Air Screen Clean or Replace Air Cleaner Cartridge 2 Clean Engine Cylinder Fins Replace Spark Plug 1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions. LUBRICATION CHART GENERAL RECOMMENDATIONS TINE CON

Summary of the content on the page No. 11

engine_art_12 MAINTENANCE Disconnect spark plug wire before performing any maintenance (except car bu re tor adjustment) to prevent accidental start ing of engine. Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Re move fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris. Do not touch hot muffler or cylinder fins as contact may cause burns. ENGINE LUBRICATION OIL Use only high quality detergent oil rated with AP

Summary of the content on the page No. 12

MAINTENANCE COOLING SYSTEM (See Fig. 14) MUFFLER Your engine is air cooled. For proper en gine performance Do not operate tiller without muffler. Do not tamper with and long life keep your engine clean. exhaust system. Damaged mufflers or spark arresters could • Clean air screen frequently using a stiff-bristled brush. create a fire hazard. Inspect pe ri odi cally and re place if • Remove blower housing and clean as nec es sary. nec es sary. If your engine is equipped with a spark arrester

Summary of the content on the page No. 13

SERVICE AND ADJUSTMENTS CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug. MID-WIDTH TILLING - 24" PATH (See Fig. 17) TILLER • Assemble holes “A” in tine hubs to holes “C” in tine shaft. TO ADJUST HANDLE HEIGHT (See Fig. 15) Factory assembly has provided lowest handle height. Se lect A C handle height best suited for your tilling conditions. Handle A C height will be different when tiller digs into soil. • If a higher handle hei

Summary of the content on the page No. 14

SERVICE AND ADJUSTMENTS FINAL CHECK “ON” POSITION TO REPLACE V-BELT (See Fig. 21) • With tine control “ON” (held down to handle) push down Replace V-belt if it has stretched con sid er ably or if it has cracks on handle to raise tines off the ground. or frayed edges. • Slowly pull recoil starter handle while observing tines. • Belt guard must be removed to ser vice belt. See “TO Tines should rotate forward. REMOVE BELT GUARD” in this section of manual. • If tines do not rotate, inner wi

Summary of the content on the page No. 15

STORAGE Immediately prepare your tiller for storage at the end of the ENGINE OIL season or if the unit will not be used for 30 days or more. Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this man ual). WARNING: Never store the tiller with gasoline in the tank inside a build ing where fumes may reach an open flame CYLINDER(S) or spark. Allow the engine to cool before storing in any enclosure. • Remove spark plug. • Pour 1 ounce (29 m

Summary of the content on the page No. 16

TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in the Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Dirty air cleaner. 4. Clean or replace air cleaner cartridge. 5. Water in fuel. 5. Empty fuel tank and carburetor, and refill tank with fresh gasoline. 6. Clogged fuel tank. 6. Remove fuel tank and clean. 7. Loose spark plug wire. 7

Summary of the content on the page No. 17

SERVICE NOTES 17

Summary of the content on the page No. 18

SERVICE NOTES 18

Summary of the content on the page No. 19

SERVICE NOTES 19

Summary of the content on the page No. 20

LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from de- fects in materials and work man ship. For a period of one (1) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due to materials or workmanship. This Warranty is subject to the following limita- tions and exclus


Alternative user manuals
# User manual Category Download
1 McCulloch MFT55 User manual Tiller 3
2 McCulloch 532 43 21-09 User manual Tiller 1
3 McCulloch 532 43 36-95 User manual Tiller 0
4 McCulloch MHDF800 User manual Tiller 1
5 McCulloch 96081000900 User manual Tiller 1
6 McCulloch 96083000400 User manual Tiller 0
7 Agilent Technologies 5951-2827 User manual Tiller 1
8 Agilent Technologies 5951-2826 User manual Tiller 1
9 Agri-Fab 45-0308 User manual Tiller 0
10 Agri-Fab 45-03083 User manual Tiller 3
11 Agri-Fab 45-03085 User manual Tiller 1
12 Agri-Fab 810-218 User manual Tiller 0
13 Agri-Fab 45-03084 User manual Tiller 1
14 Ariens 427490 User manual Tiller 0
15 Ariens 90203200 User manual Tiller 0