Summary of the content on the page No. 1
Operating and Installation
Instructions
Salamander Grill
CS 1421
To prevent accidents and en-CA
machine damage,
read the Operating Manual
before
installation or use. M.-Nr. 07 472 000
Summary of the content on the page No. 2
Contents Safety instructions and warnings ....................................3 Description of the unit..............................................8 Before using for the first time........................................9 Operation .......................................................10 Raising and lowering the browning unit ................................10 Switching on and off ...............................................10 Browning ......................................................
Summary of the content on the page No. 3
Safety instructions and warnings Correct use WARNING- When using your The grill is intended for household ~ appliance follow basic use only, as described in these precautions, including the instructions. Using it for other purposes following: is not permitted, and may be dangerous. The manufacturer will not Read all instructions before be held liable for damage caused by installation or use to prevent incorrect or unauthorized use of the injury and appliance damage. appliance. This appliance con
Summary of the content on the page No. 4
Safety instructions and warnings Children Packing materials (cling wrap, ~ styrofoam) can be dangerous for Always supervise any children in the ~ children because of the danger of vicinity of the appliance. Do not allow suffocation. Keep such materials out of children to play with the unit. the reach of children, and dispose of Children should use the grill only if them as promptly as possible. ~ they have received sufficient instruction to operate it safely. They must be able to understand and
Summary of the content on the page No. 5
Safety instructions and warnings Technical safety Do NOT use a power bar or ~ extension cord to connect the Only skilled persons duly authorized ~ appliance to the power supply. They do by the manufacturer may install this not guarantee the required safety of the appliance or perform maintenance and appliance (e.g., danger of overheating). repair work on it. Work performed by unqualified persons carries the risk of For safety reasons, this appliance ~ serious harm to the user, for which the must
Summary of the content on the page No. 6
Safety instructions and warnings Repair of the appliance during the Correct use ~ warranty period should be performed The appliance becomes hot during ~ only by Customer Service personnel use and remains so for some time after who are duly authorized by the being switched off. Caution: Danger of manufacturer; otherwise any damage burns! will not be covered by the warranty. Protect your hands whenever ~ Before any maintenance or repair ~ working with a hot appliance - wear work is performed, the
Summary of the content on the page No. 7
Safety instructions and warnings Do not set up or operate the If the appliance is plugged into a ~ ~ appliance in the open air. nearby socket, check to be sure that the power cord does not come into Do not use the ledge for storage. If ~ contact with the hot appliance. This the appliance is accidentally switched could damage the insulation on the on or there is residual heat, there is the cord. Danger of electrocution! danger that any items located there will heat up and melt, depending on the M
Summary of the content on the page No. 8
Description of the unit a Browning unit, retractable Display b Ledge, removable c Display Control knob f "ON" light d For setting the power level g Residual heat indicator e For selecting the height of the browning unit 8
Summary of the content on the page No. 9
Before using for the first time Clean the appliance ^ Remove any protective foil. ^ Wipe down all surfaces with a damp cloth, then dry. The metal parts have a protective coating. This will cause an odour the first time the appliance is used. Note that the odour and any vapours will disappear after a brief period of time and are not a sign of malfunction or a defective appliance. 9
Summary of the content on the page No. 10
Operation Raising and lowering the Switching on and off browning unit Do not leave the appliance ^ To raise the browning unit, turn the unattended while in use. left-hand control to Extend ("-"). The appliance is switched on when the The browning unit will automatically right control knob is turned to the extend to its full height, even when you desired setting, and is switched off release the control knob back to "ß". when the knob is turned to "0". You can stop the unit at any height by briefl
Summary of the content on the page No. 11
Operation Browning Useful tips ^ Raise the browning unit. You can use the appliance to melt cheese over such items as meat, ^ Place the dish you wish to brown on (toasted) bread, and vegetables. You the ledge. can also use the browning element for ^ Lower the browning unit until the desserts, to caramelize the sugar 3 15 heating element is 1 / "-1 / " topping on creme brûlée, for instance. 16 16 (30 - 50 mm) away from the top of the food. However, the appliance is not suitable for reheating food
Summary of the content on the page No. 12
Safety features Safe retraction Obstruction protection To avoid damaging the appliance, your As soon as the browning unit grill is equipped with a retraction safety encounters any resistance with a 3 device. The browning unit can be fully diameter greater than / " (10 mm) 8 retracted only once the appliance has between the browning unit and the cooled sufficiently, i.e., after the ledge, the process is interrupted and residual heat indicator has gone out. the browning unit automatically rises 3
Summary of the content on the page No. 13
Care and cleaning To avoid damge, do not use the Warning: NEVER use a steam following cleaning products: cleaner to clean this appliance. – products containing washing soda, Steam could reach the electrical acids/alkalis, ammonia, or bleach, components and cause a short circuit. – products containing scale removers, – stain and rust removers, Clean the appliance on a regular basis, preferably after each use. First allow – scouring cleansers, e.g., scouring the appliance to cool down. After any p
Summary of the content on the page No. 14
Care and cleaning Stainless steel Built-in frame Use a non-abrasive stainless steel Clean the built-in frame regularly. cleanser for cleaning the appliance. To Always promptly remove food spatters help keep the appliance clean longer, and liquids. Clean the frame with a soft we recommend using a stainless steel cloth, some dish detergent and warm care product (see "Optional water, and then dry with a soft cloth. accessories"). Apply the product sparingly, using a soft cloth. Ceramic surface of t
Summary of the content on the page No. 15
Frequently asked questions Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot be held responsible for unauthorized work. The unit will not raise? Possible fault Solution Dirt has built up in the gap around the Remove the dirt or the object which has browning unit or something has become stuck. become stuck. The fuse or breaker was tripped. Con
Summary of the content on the page No. 16
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. This information is visible on the silver data plate supplied with the appliance. 16
Summary of the content on the page No. 17
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and machine damage read these instructions before installation or use.
Summary of the content on the page No. 18
SAFETY INSTRUCTIONS FOR INSTALLATION Note to the installer: Also ensure that the power cord will ~ Please leave this instruction book not come into contact with any hot with the consumer for the local spots on the appliance after installation. Otherwise, the cable could suffer heat electrical inspector’s use. damage. The minimum distances given in Be sure to comply with the ~ these Installation Instructions must clearance distances listed below. be observed in order to ensure safe operation. Fai
Summary of the content on the page No. 19
SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances above the If there is more than one appliance appliance beneath a hood (e.g. wok burner and electric cooktop), and they have different minimum safety distances always observe the greater distance. The minimum distance between the appliance and an installed exhaust 9 hood must be at least 25 / " 16 (650 mm). However, if the hood manufacturer requires a larger distance, the larger distance takes precedence. If there are no specifications from t
Summary of the content on the page No. 20
SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. A distance of alteast 2" (50 mm) must be kept between the countertop cut-out recommended and the rear wall because of the high temperatures radiated. The minimum distance a between the worktop cut-out and a wall
