Summary of the content on the page No. 1
WR-5
GB
Rersion 1
Summary of the content on the page No. 2
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod may affect wireless performance. iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple inc., registered in the U.S. and othe
Summary of the content on the page No. 3
Table of contents GB Important safety instructions ............................................... 3-4 Introduction .............................................................................. 5 Controls .............................................................................. 6-10 Remote control functions ..................................................... 11 Using the radio for the first time ........................................... 12 Operating your radio – AM/FM .................
Summary of the content on the page No. 4
Important Safety Instructions 9. Power sources; The radio should be operated only from the type of 1. Read and understand all safety and operating instructions before the power source indicated on the marking label. If you are not sure of radio is operated. the type of power supply to your home, consult your radio dealer or power company. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 10. Mains adaptor: The mains adaptor
Summary of the content on the page No. 5
GB 14. Do not attempt to service the receiver yourself. Removing the cover may expose you to dangerous voltage, and will void the warranty. Refer all servicing to authorized service personnel. 15. Never push objects of any kind into this radio through opening as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind into the product. 16. Apparatus shall not be exposed to dripping
Summary of the content on the page No. 6
Introduction The Sangean WR-5 AM/FM-RDS/iPod Dock Wooden Table-top Receiver provides the following range of features: Radio for AM and FM (with RDS) broadcasts. 12 radio station presets (6 for AM, 6 for FM). Large LCD display with adjustable backlight. Two alarm timers with snooze feature to wake you to either buzzer, radio alarm, or iPod. Adjustable sleep timer which can be set to turn the clock radio off after between 15 and 120 minutes. A 3.5mm stereo Auxiliary Input socket for playing audio
Summary of the content on the page No. 7
Controls GB 1. Speakers 3. Remote control sensor 2. LCD display 6
Summary of the content on the page No. 8
Controls 4. FM telescopic antenna 8. AC in 5. AM external antenna terminal 9. Headphone jack 6. Ground terminal 10. Line out socket 7. Battery compartment 11. Aux in socket 7
Summary of the content on the page No. 9
Controls GB 12. iPod Universal Dock adjuster 21. Snooze / dimmer 13. iPod Dock connector 22. Preset 5 / Play / pause 14. Info / menu button 23. Preset 4 / Back Forward 15. Preset 3 / Repeat button 24. Source 16. Tuning control 25. Preset 1 / Folder Down 17. Seek / Select button 26. Tone button 18. Standby / Sleep timer 27. Volume control 19. Preset 6 / Fast Forward 28. Alarm 1 20. Preset 2 / Folder Up 29. Alarm 2 8
Summary of the content on the page No. 10
Display icons A. Battery capacity indicator B. PM indicator C. Time display D. Sleep timer icon E. Alarm 1 icon F. Alarm 2 icon G. Frequency / information for station display H. RDS icon 9
Summary of the content on the page No. 11
Remote control GB a. Back forward b. Repeat one / all c. Tuning up d. Folder up / preset up e. Folder down / preset down f. Tuning down g. Mute h. Snooze / dimmer i. Tone j. Volume down k. Volume up l. Repeat random m. Select n. Fast forward o. Play / pause p. Source q. Menu r. Standby / Sleep timer 10
Summary of the content on the page No. 12
Remote control functions Many functions of the WR-5 tabletop receiver can be operated using the remote control. Some operations require a longer press of the button. In this case simply keep your finger held on the remote control button for 2-3 seconds until the display on the radio shows that the command has been accepted. Before the first operation: please remove the small transparent foil from the battery holder to activate the battery. Remote control battery replacement 1. Open the battery h
Summary of the content on the page No. 13
Using the radio for the first time GB Using the AC power adaptor Getting started with external accessories The AC power adaptor required for this unit should be 12 volts AC You may use an optional AM Radio Antenna as external antenna if at 1.6A. satisfactory reception cannot be obtained. Connect the optional AM radio antenna to the AM external antenna terminal and ground Insert the adaptor plug into the AC socket on the rear of the radio. terminal located on the rear panel. See figure 5, 6. Plug
Summary of the content on the page No. 14
Operating your radio – Search tuning AM/FM 1. Press the Standby button to switch on your radio. 2. Press the Source button as needed until the AM or FM band is selected. 3. Press and release the Seek / Select button to carry out an auto-tune. 2 Your radio will scan up the AM/FM band from the currently displayed frequency and will stop scanning automatically when it finds a station of sufficient strength. 4. After a few seconds the display will update. The display will show the
Summary of the content on the page No. 15
GB Manual tuning – AM/FM 1. Press the Standby button to switch on your radio. 2. Press and release the Source button to select AM or FM radio mode. 3. Rotate the Tuning control to tune to a station. The FM frequency will change in steps of 100kHz/50kHz and AM frequency will change in 2 steps of 10kHz/9kHz. 4. When the end of the waveband is reached your radio will recommence tuning from the opposite end of the waveband. 5. Use the Volume control to adjust the sound level as required.
Summary of the content on the page No. 16
Setting up the tuning step increment 1. Press and hold the Info/menu button to enter the menu setting. 1,4 2. Rotate the Tuning control until FM 50/100MHz or AM 9/10kHz appears on the display, and press and release the Seek / Select button to enter the step increment setting. 3. Rotate the Tuning control to select either 100kHz/200kHz (US version) or 50kHz/100kHz (European version) for FM radio, and 9kHz/10kHz for AM radio. Then press and release the 2,3 Seek / Select button
Summary of the content on the page No. 17
Display modes – FM GB Your radio has a range of display options for FM radio mode. 1. Repeatedly press and release the Info/menu button to view the RDS information of the station you are listening to. 1 Station name Displays the name of the station being listened to. a. Program type Displays the type of station being listened to such b. as Pop, Classic, News, etc. Radio text Displays radio text messages such as new c. items etc. Stereo / Mono Displays the radio broadcasting is in Stereo or d
Summary of the content on the page No. 18
FM stereo (auto) / mono If the FM radio station being listened to has a weak signal some hiss may be audible. It is possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo. 1. Press the Source button as needed to select the FM radio mode display and tune to the required FM station as previously described. 2. Press and hold the Info/menu button to enter the menu setting. 3. Rotate the Tuning control until the FM Stereo / mono setting shows 2 on the
Summary of the content on the page No. 19
Presetting stations in AM/FM mode GB There are 6 preset stations each for AM and FM radio. They are used in the same way for each waveband. 1. Press the Standby button to switch on your radio. 2. Press the Source button to select the desired waveband. Tune to the required radio station as previously described. 3. Press and hold the required Preset button (1 to 6) until the display shows “P3” for example after the frequency. The station will be 2 stored using the preset number. Repeat
Summary of the content on the page No. 20
iPod docking Your radio has an iPod docking facility which allows you to play digital audio files and soundtracks held on your iPod directly. Your radio uses the iPod Universal Dock adjustor developed for use with iPods. Recent models of iPod are supplied with Universal Dock Adapter inserts which ensure correct alignment of the iPod with the electrical connector. Important: The radio does not support iPod 3rd generation (build 2003-2004). To avoid possible damage to your iPod, do not use your iP
