Simplicity 1693651 860M user manual

User manual for the device Simplicity 1693651 860M

Device: Simplicity 1693651 860M
Category: Snow Blower
Manufacturer: Simplicity
Size: 0.74 MB
Added : 9/9/2014
Number of pages: 26
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Simplicity 1693651 860M. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Simplicity 1693651 860M.

For your convenience

If looking through the Simplicity 1693651 860M user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Simplicity 1693651 860M on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Simplicity 1693651 860M to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Simplicity 1693651 860M User manual - Online PDF
Advertisement
« Page 1 of 26 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Simplicity 1693651 860M but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Simplicity 1693651 860M. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

How to use this file...(Operators Manuals)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper Size: * 11 x 17
* Body—50 lbs brilliant white offset or equivalent.
* Cover—on pre-printed two-tone “Swash” stock.
Press: * Body—1-color, 2-sided
* Cover imprint —1-color, 1-sided
Bindery: * Saddle Stitch, Face Trim
* Face Trim
COVERS: * This file contains several manuals, which differ only in their covers.
* Covers are all present at the beginning of th

Summary of the content on the page No. 2

THIS PAGE INTENTIONALLY BLANK

Summary of the content on the page No. 3

OPERATOR’S MANUAL Large Frame Snowthrower 860M LargeFrame Snowthrower Mfg. No. Description 1693650 860M, 8HP Snowthrower 1693651 860M, 8HP Snowthrower (Export) 1693763 860M, 8HP Snowthrower 1693775 860M, 8HP Snowthrower (Export) 1720535-01 Rev 4/2000 TP 100-2292-01-LW-S

Summary of the content on the page No. 4

MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2000, Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.

Summary of the content on the page No. 5

Table Of Contents SAFETY RULES REGULAR MAINTENANCE General ...................................................................2 Normal Care Chart................................................12 Preparation .............................................................2 Off-Season Storage ..............................................12 Operation ................................................................3 Starting After Storage ...........................................12 Maintenance & St

Summary of the content on the page No. 6

Safety Rules WARNING WARNING This unit is a “two-stage” snowthrower. To avoid serious injury, do not put your hands into the auger housing or discharge chute. If auger stalls The first stage is the auger, which feeds the snow or chute becomes plugged, use the following proce- back into the impeller housing. The second stage is dure to remove objects or clear the chute: the impeller, which throws the snow out the dis- 1. Release both the Drive and Auger Control levers. charge chute. If bodily con

Summary of the content on the page No. 7

Safety Rules OPERATION MAINTENANCE & STORAGE  Keep hands and feet away from rotating parts. Keep  Keep all nuts, bolts and screws tight to ensure that clear of discharge opening at all times. the equipment is in safe operating condition.  Always clear snow up and down the face of slopes,  Never store equipment with gasoline in the tank in a never across the face. Use extreme caution when building where fumes may reach an open flame or changing direction on slopes. Do not attempt to clear spa

Summary of the content on the page No. 8

Safety Decals SAFETY DECALS Safety warning decals are placed at strategic locations on the snowthrower as a constant reminder to the opera- tor of the most important safety precautions. All warning, caution and instructional messages on your snowthrow- er should be carefully read and obeyed. If any of these decals are lost or damaged, replace them at once. They can be purchased from your local dealer. WARNING TO AVOID SERIOUS INJURY  Read Owner’s Manual before operating unit.  Never allow chil

Summary of the content on the page No. 9

Controls SNOWTHROWER CONTROLS A Speed Selects Forward Speeds 1 - 5, B D Selector Reverse Speeds 1 - 2 C B Drive Control Engages drive to wheels as it is A F depressed; disengages when released. E I C Auger Control Engages auger/impeller as it is depressed; disengages when released. D Chute Direction Rotates discharge chute to Control desired direction E Chute Controls vertical angle snow is Deflector thrown. F Chute Locks chute deflector at desired H Deflector Knob angle G G Skid Shoes Controls

Summary of the content on the page No. 10

Controls STARTING CONTROLS A B Electric Start Units Only A. Electric Start Button - The Electric Start Button C (A, Figure 3) activates an electric starter mounted to the engine, eliminating the need to pull the starter handle. The Electric Start Button operates on 120 Volts AC, which is provided by connection to the extension cord provided with units equipped with this feature. Connect this extension cord ONLY to a G properly grounded 3 prong electrical outlet. All Models B. Fuel Valve - The f

Summary of the content on the page No. 11

Controls GROUND SPEED CONTROLS B A D C A. Speed Selector - This lever (A, Figures 4 & 5) is used to set the ground speed of the snowthrower. The snowthrower has five forward speeds, 1–5, and two reverse speeds, 1–2. No neutral position or gate is required, since the traction drive design automati- cally provides "neutral" (no forward or reverse move- ment), whenever the Drive Control is released. B. Drive Control - This control engages the traction drive as the lever (B, Figures 4 & 5) is depr

Summary of the content on the page No. 12

Operation GENERAL OPERATION CHECKS BEFORE EACH START-UP WARNING 1. Make sure all safety guards are in place and all nuts, To avoid serious injury, do not put your hands into bolts and clips are secure. the auger housing or discharge chute. If auger stalls or chute becomes plugged, use the following proce- 2. Check the engine oil level. See your engine Owner’s dure to remove objects or clear the chute: Manual for procedure and specifications. 1. Release both the Drive and Auger Control levers. 3.

Summary of the content on the page No. 13

Operation STARTING THE ENGINE A B 1. Turn the fuel valve (B, Figure 6) to the ON position. 2. Insert the Engine Key (F) into the Engine Key slot and push fully in to the RUN position. C 3. Move the Throttle Lever (E) fully up to the FAST posi- tion. 4. Turn the Choke Knob (G) fully clockwise if engine is cold. (Do not choke a warm engine.) 5. Push the Primer Button (D) two times if engine is G cold. (Do not prime a warm engine.) 6. Pull Starter Handle (C) rapidly, or push Starter Button if equip

Summary of the content on the page No. 14

Operation GROUND SPEED SELECTOR B A Use the Speed Selector (A, Figure 8) to control the drive speed of the snowthrower. There are five forward speeds and two reverse speeds. Use the lower speeds to blow deep or wet snow. Use the higher speeds to blow light snow or to drive the snow- thrower without blowing snow. To change speeds, first release the traction Drive Control lever (B, Figure 8), then move the Speed Selector to the desired speed setting. Fully press the traction Drive Control lever

Summary of the content on the page No. 15

Operation FREE-WHEELING AND TRACTION DRIVE LOCK Klik-Pin In OUTER Hole For easy turning when pushing the snowthrower, you can disengage the traction drive at one or both wheels by using the Traction Lock Pins (See Figures 11 & 12.) 1. Turn the unit off, remove the Engine Key, and discon- nect the spark plug wire. 2. To DISENGAGE the traction drive lock, insert the Traction Lock Pin through the outer hole in the axle. (See Figure 8). 3. To ENGAGE the traction drive lock, insert the pin Figure 11.

Summary of the content on the page No. 16

Regular Maintenance NORMAL CARE CARE REQUIRED FREQUENCY LUBRICATION Simplicity Winter Weight Check auger gear case lubrication.** 25 Hours Worm Gear Oil Lubricate snowthrower. 10 Hours 10W Oil and Grease Check tire pressure. Monthly N/A ✛ ✛ Change engine oil.* 50 Hours See Engine Manual ✛ Clean or replace spark plug. Yearly See Engine Manual Check drive linkage/belt tension 4-6 Hours N/A * Change original oil after two hours of operation. ** Check oil level each fall and spring. ✛ See your engi

Summary of the content on the page No. 17

Regular Maintenance Figure 14. Checking Tire Pressure Figure 15. Lubricate Points Where Chute Contacts CHECKING TIRE PRESSURE Flange (oil); Lubricate Ring Gear and Pinion Gear The air pressure in each tire should be 20 psi (136 kPa) While Rotating Spout (grease) and should be equal for both tires for best performance. Be sure to keep caps on valves to prevent entry of debris into the valve stem when tires are filled. LUBRICATION IMPORTANT NOTE It is very important that grease fittings on the aug

Summary of the content on the page No. 18

Troubleshooting, Adjustments, & Service TROUBLESHOOTING This section provides troubleshooting and service WARNING instructions. Locate the problem and check the possible cause/remedy in the order listed. Before performing any adjustment or service to snowthrower, stop the engine and wait for moving Also, refer to the engine manufacturer’s Owner’s Manual parts to stop. Remove the key. To prevent accidental for additional information. starting, disconnect the spark plug wire and fasten For probl

Summary of the content on the page No. 19

Troubleshooting, Adjustments, & Service PROBLEM POSSIBLE CAUSE REMEDY 1. Chute Deflector too low. 1. Adjust deflector as necessary. Auger rotates, but snow is not thrown far enough 2. Engine speed too slow. 2. Set speed to full throttle. 3. Ground speed too fast. 3. Use slower Speed Selector setting. 4. Snowthrower discharge chute clogged. 4. STOP engine and REMOVE the key. DISCONNECT the spark plug wire. Clear auger using a narrow board. See warning in SAFETY RULES. 5. Auger belt loose or worn.

Summary of the content on the page No. 20

Troubleshooting, Adjustments, & Service TRACTION DRIVE SYSTEM ADJUSTMENT A Speed Selector Pivot Adjustment The Speed Selector is factory set for optimal perfor- mance at each forward and reverse speed setting. However, if drive system components have been replaced, adjustment may be necessary. Adjust as follows: 1. Move the ground speed control (A, Figure 19) fully forward. B 2. Loosen the hardware (B) securing the upper and lower shift rods. 3. Push the lower rod (C) down fully (into the housin


Alternative user manuals
# User manual Category Download
1 Simplicity 09A4130203E1 User manual Snow Blower 2
2 Simplicity 1010 User manual Snow Blower 4
3 Simplicity 1009 User manual Snow Blower 4
4 Simplicity 10530L User manual Snow Blower 12
5 Simplicity 105308E User manual Snow Blower 1
6 Simplicity 1060 User manual Snow Blower 2
7 Simplicity 10.5 User manual Snow Blower 1
8 Simplicity 1080S User manual Snow Blower 20
9 Simplicity 10560 User manual Snow Blower 1
10 Simplicity 10528 User manual Snow Blower 1
11 Simplicity 1060M User manual Snow Blower 0
12 Simplicity 1070 User manual Snow Blower 2
13 Simplicity 1060E User manual Snow Blower 3
14 Simplicity 11532 User manual Snow Blower 4
15 Simplicity 11570 User manual Snow Blower 4
16 Agri-Fab 45-0402 User manual Snow Blower 2
17 Agri-Fab 45-0418 ATV User manual Snow Blower 1
18 Agri-Fab 45-0418 User manual Snow Blower 1
19 Alliance Laundry Systems DRYING TUMBLERS 70269501R3 User manual Snow Blower 2
20 Ariens 924 SNO-THRO 924109 User manual Snow Blower 60