Summary of the content on the page No. 1
User Guide
TL-POE10R
PoE Splitter
Rev:4.0.0
7106503936
Summary of the content on the page No. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES
Summary of the content on the page No. 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar
Summary of the content on the page No. 4
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Прод у к т серт и ф іковано згідно с правила м и системи УкрСЕ П Р О на відповідн і ст ь вим ога м нор м атив ни х доку ментів та вим огам, що передб а ч е
Summary of the content on the page No. 5
CONTENTS Package Contents ................................................................... 1 Chapter 1 Introduction ........................................................ 1 1.1 Overview of the Product.............................................. 1 1.2 Features ...................................................................... 2 Chapter 2 Identifying External Components..................... 2 Chapter 3 Connecting the PoE Splitter ............................. 3 Appendix: Specif
Summary of the content on the page No. 6
Package Contents The following items should be found in your package. TL-POE10R PoE Splitter One Ethernet (CAT5 UTP) Cable One Power Cable This User Guide Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor. Chapter 1 Introduction 1.1 Overview of the Product Thank you for choosing the TL-POE10R PoE Splitter. The PoE Splitter fully complies with IEEE 802.3af standard, and can work with
Summary of the content on the page No. 7
1.2 Features Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af standards Data and Power carried over the same cable Supports optional 5V DC, 9V DC or 12V DC power supply Supports Plug-and-Play for the devices ，without any configuration Elegant appearance with space-saving mini size Chapter 2 Identifying External Components Power-mode switch: POWER+DATA IN: You can choose the DC Connect to the PSE output of 12V, 9V or 5V or PoE Injector with by turning the sw
Summary of the content on the page No. 8
LAN OUT: Connect to DC OUT: Connect to the the Ethernet device power port of the Ethernet with CAT5 UTP cable device with the provided power cable to supply the to transmit data. power of 5V, 9V or 12V DC. PWR: Power LED, a steady green light indicates that the PoE Splitter can supply power. Chapter 3 Connecting the PoE Splitter You can use TL-POE10R PoE Splitter with PSE or PoE Injector to expand your network to where there are no power lines or outlets, where you wish to fix dev
Summary of the content on the page No. 9
3. Connect the LAN OUT port to the Ethernet device with CAT5 UTP cable for data transmitting. 4. Connect the DC OUT port to the power port of the same Ethernet device with the provided power cable. Note: The power of Ethernet device is suggested to be under 10W. Now, the Ethernet device can work normally with data and power. The topology of this network is as follows. 4
Summary of the content on the page No. 10
Appendix: Specifications Normal IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Standards IEEE 802.3af, Voltage Output DC 5V, 9V or 12V Power Output 12V/1A, 9V/1A, 5V/2A 1 10/100/1000Mbps Auto-Negotiation RJ45 LAN port 1 10/100/1000Mbps Auto-Negotiation Ports RJ45 PoE port 1 12V/9V/5V DC Power Output Port Cabling Type RJ45 CAT 5 UTP cable LED PWR Safety & FCC, CE Emissions Environmental and Physical Operating Temp 0 ℃~40 ℃ (32 ℉~104 ℉) Storage Temp -40 ℃~70 ℃ (-40 ℉~158 ℉) Oper
