American Standard Swan 6011 user manual

Summary of the content on the page No. 1

Installation
Instructions
SWAN
6011
IN WALL PRESSURE BALANCING
BATH AND SHOWER SETS
6012
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these
instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
M968462S-O
Required Tools
ROUGHING-IN DIMENSIONS
To assure proper positioning in relation to wall,
note roughing-in dimensions. Phillips Screwdriver Flat Blade Screw

Summary of the content on the page No. 2

9 7 5 1 1 3 5 5 1 1 1 0 3 3 1 1 1 1 9 9 7 7 5 5 3 3 1 1 INSTALL TRIM INSTALL HANDLE 2 3 CAUTION: Protect finish on SHOWER ARM, SHOWER HEAD and TUB SPOUT when installing. Push ADAPTER (3) onto VALVE STEM (4). When finished tiling the wall, remove PLASTER GUARD (A) Install SCREW (2) through ADAPTER (3) into and turn off water supply. VALVE STEM (4). Push CAP (1) over VALVE CARTRIDGE (2). Find correct position of HANDLE (1) and push HANDLE (1) onto ADAPTER (3). Mount ESCUTCHEON (3) and gasket to

Summary of the content on the page No. 3

TO GAIN ACCESS TO VALVE FOR SERVICING 5 Remove handle SET SCREW, remove HANDLE, unscrew HANDLE SCREW and remove ADAPTER. Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON. Remove COVER by pulling straight out. Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve. VALVE LEAKS WHEN SHUT OFF Remove CARTRIDGE (1) by removing CARTRIDGE SCREWS (2). Remove three SCREWS (3) from FIXATION RING (4) and pull out PRESSURE BALANCING (5)

Summary of the content on the page No. 4

1 5 1 3 1 1 9 7 5 3 1 SWAN PRESSURE BALANCING BATH AND SHOWER SETS M962304-YYY0A MODEL NUMBER SHOWER ARM AND ESCUTCHEON 6011 6012 M953530-YYY0A SHOWER HEAD Replace the "YYY" with appropriate finish code M952100-0070A CHROME 002 PRESSURE BALANCING UNIT SATIN 295 M961854-0070A FIXATION RING WITH SCREWS A923611-0070A HOT LIMIT STOP M907053-YYY0A 027816-0070A CARTRIDGE CAP 1/2" NPT PLUG 078016-YYY0A ESCUTCHEON SCREWS A954440-0070A CARTRIDGE 023603-0070A M962305-YYY0A CARTRIDGE SCREWS ESCUTCHEON KI