Summary of the content on the page No. 1
Memory DIMM
Installation Instructions
DIMM PART NUMBER
64MB: 70040901
128MB: 70041101
256 MB: 70041201
512 MB: 70041901
Summary of the content on the page No. 2
Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki
Summary of the content on the page No. 3
Getting Started The printers have four sockets for memory DIMM boards. You can expand the printer’s memory up to 1 GB by installing two 512-MB DIMMs. To achieve the 1 GB memory in most models, you will need to replace the DIMM(s) provided with 512 MB DIMMs. The printer will not acknowledge more than 1 GB of memory. Model Memory Provided C7300 64 Mb C7300n 64 Mb C7300dxn 128 Mb C7500n 128 Mb C7500dxn 128 Mb C9300 128 Mb C9300n 128 Mb C9300dxn 192 Mb (64 + 128 MB) C9500dxn 320 Mb (64 + 256 MB)
Summary of the content on the page No. 4
Prepare the Printer 1. Turn off the printer and unplug the power cord. 2. Detach the interface cable from the printer. 3. Remove and save the thumbscrew at the top and bottom which hold the control board in place. C7100/C7300/C7500 C9300/C9500 3
Summary of the content on the page No. 5
4. Grasp the control board, loosen it by wiggling it back and forth, and slide it out of the printer. C9300/C9500 C7100/C7300/C7500 4
Summary of the content on the page No. 6
Install the DIMM(s) 1. Locate the DIMM sockets (circled) on the control board. 2. Push out the white lock tabs at either end of the DIMM socket. Caution! Circuit boards can be damaged by static electricity and rough handling. To avoid damage, ground yourself (touch metal) before handling DIMMs. 5
Summary of the content on the page No. 7
3. Remove the DIMM from its shipping package. 4. Align the DIMM with the narrow strip (1) on its metallic contact edge toward the front of the control board, then carefully insert the DIMM in the socket. Press down firmly, until you feel the board engage the connector, then raise the white tabs to lock the DIMM in place. 5. Repeat steps 2 through 4 for each DIMM being installed. 6
Summary of the content on the page No. 8
Complete the Installation 1. Align the bottom of the control board with the track in the printer and slide it back into place. C9300/C9500 C7100/C7300/C7500 7
Summary of the content on the page No. 9
2. Reinstall the thumbscrews at the top and bottom of the board. C7100/C7300/C7500 C9300/C9500 3. Reattach the computer interface cable. 4. Plug the power cord into the power outlet and turn on the printer. 8
Summary of the content on the page No. 10
Check for Proper Installation Generate a MenuMap printout and check to be sure that the DIMMs are properly installed. MENU ITEM VALUE SELECT 0 1 2 3 ON ON LINE LINE CANCEL 4 5 6 7 1. Press MENU once or twice until INFORMATION MENU appears on the display. 2. Press SELECT. PRINT MENU MAP appears on the display. 3. Press SELECT. The MenuMap prints. 4. Check the top of the MenuMap printout to verify that the DIMMs you installed are listed (they will appear as DIMMs). 5. If the DIMM is not liste
Summary of the content on the page No. 11
Change the Memory Setting in the Driver(s) ® ® ® Windows Adobe PostScript Driver 1. Click Start — Settings — Printers. The Printers dialog box opens. 2. Right click the appropriate OKI PostScript driver icon, then click Properties. 3. Windows 2000 & NT 4.0: a. Click the Device Settings tab. b. Scroll down to Installable Options and click Memory Configuration. c. Under Change ‘Memory Configuration’ Setting, click the total memory installed (original plus the memory you just installed). Windows
Summary of the content on the page No. 12
Macintosh® Driver (OSX) 1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable. ® Macintosh Driver 1. Activate Chooser from the Apple menu. 2. Select LaserWriter 8. 3. Click Printer — Setup. 4. Click Configure. 5. Change the Memory Configuration setting to match the total DIMM memory installed (original plus the new memory you just installed): 6. Click OK twice, then close Chooser. 11
Summary of the content on the page No. 13
Limited Warranty Oki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. Oki Data will repair (or at its option, replace) at no charge, any defective part(s) of the OPTION for one (1) year from the date of purchase. This Limited Warranty extends to the original purchaser only. To make request or claim for service under this Limited Warranty the original purchas
Summary of the content on the page No. 14
WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. Additional information on obtaining servi
Summary of the content on the page No. 15
Oki Data Service Depot Information UNITED STATES Oki Data Americas, Inc. 2020 Bishops Gate Blvd. Mt Laurel, NJ 08054 Tel: 1-800-654-3282 Fax: 1-856-222-5247 CANADA Oki Data Americas, Inc. 2735 Matheson Blvd. East, Unit 1 Mississauga, Ontario Canada L4W 4MB Tel: 800-654-3282 Fax: 905-238-4427 MEXICO Oki Data de Mexico, S.A. de C.V. Mariano Escobedo No. 748 - 8 Piso Col Anzures, e.p. 11590 Mexico, DF Tel: (525) 263-8780 Fax: (525) 263-8785 BRAZIL Oki Data do Brasil, Ltda. Rua Alexandre Dumas, 2220
Summary of the content on the page No. 16
Oki Data Americas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (800) 654-3282 FAX: (856) 222-5320 http://www.okidata.com DIMM Install Guide: 58365101 15
