Summary of the content on the page No. 1
Installation Guide
Creative DSL USB 7410
RFC 2364
Table of Contents
1 INTRODUCTION ......................................................................................... 1
1.1 Minimum System Requirements............................................................ 1
1.2 Hardware Installation ............................................................................. 2
Jacks on your Creative DSL 7410 ............................................................... 2
Summary of the content on the page No. 2
Installation Guide Creative DSL USB 7410 RFC 2364 1 INTRODUCTION Creative DSL USB 7410 is developed to bring modem users into the digital era by providing high-speed Internet connections using their current phone lines. An interface via USB connection and extremely simple hardware installation allows Creative DSL 7410 users to quickly setup and configure their DSL network. This user’s guide provides information on how to setup and configure the Creative DSL 7410 in Windows 98. Before starti
Summary of the content on the page No. 3
Installation Guide Creative DSL USB 7410 RFC 2364 1.2 Hardware Installation This section provides information about the components of your Creative DSL 7410 as well as the hardware installlation. It includes the following: Jacks on your Creative DSL 7410 Indicator LEDs Hardware Installation Jacks on your Creative DSL 7410 Located at the back panel of your Creative DSL 7410 (see illustration below) are several connectors which allows you to attach the PC and telephone set to your Creativ
Summary of the content on the page No. 4
Installation Guide Creative DSL USB 7410 RFC 2364 Indicator LEDs Your Creative DSL 7410 features Indicator LEDs which provides your DSL line’s connection status. Refer to the following illustration and table for the definition of each LED. LED Descriptions POWER On when your Creative DSL 7410 is connected to a power source HS Flashing when trying to establish a connection to the DSL Service Provider LINK On once DSL line is connected and your Creative DSL 7410 is ready 3 of 32
Summary of the content on the page No. 5
Installation Guide Creative DSL USB 7410 RFC 2364 Hardware Installation Simply connect your Creative DSL 7410 (to the devices shown) as follows: Your Creative DSL 7410 is required to be connected with a DSL service subscribed line. From the Phone jack to a telephone set From your Creative DSL 7410 USB jack to your PC USB port From the Line jack to a DSL service subscribed wall jack 4 of 32
Summary of the content on the page No. 6
Installation Guide Creative DSL USB 7410 RFC 2364 1.3 Installation CD Your Creative DSL 7410 comes with an installation CD. Make sure you have this CD with you when you are ready to install the driver. The device driver for your Creative DSL 7410 can be found under the folder named Driver. 1.4 Before Installation Before starting the DSL device driver installation, it is very important to ensure that all the followings are in place: Subscription to a DSL Service Provider. Obtain all neces
Summary of the content on the page No. 7
Installation Guide Creative DSL USB 7410 RFC 2364 6 of 32
Summary of the content on the page No. 8
Installation Guide Creative DSL USB 7410 RFC 2364 2 INSTALLATION IN WINDOWS 98 This section provides you with instructions on how to install the device driver of your Creative DSL 7410. It is organized as follows: 2.1 Installing the Creative DSL 7410 Device Driver 2.2 Uninstalling the Creative DSL 7410 2.1 Installing the Creative DSL 7410 Device Driver 1. Connect the Creative DSL 7410 to the PC via the USB connector. The Windows 98 Plug-and-Play feature will automatically detect your Creative
Summary of the content on the page No. 9
Installation Guide Creative DSL USB 7410 RFC 2364 2. A dialog box similar to the one shown below appears. Select Search for the best driver for your device. (Recommended) and click on Next to continue. 8 of 32
Summary of the content on the page No. 10
Installation Guide Creative DSL USB 7410 RFC 2364 3. A dialog box such as the one below appears. At this time, insert the provided Creative DSL USB 7410 Installation CD. Select Specify a location and type in the path for the drivers, for example E:\Driver or D:\Driver. Click on Next to continue. 9 of 32
Summary of the content on the page No. 11
Installation Guide Creative DSL USB 7410 RFC 2364 4. A dialog box similar to the one shown below will appear. Click on Next. 5. At this time, your PC may ask you to insert the Microsoft Windows 98 CD. A dialog box such as the one below will appear. Insert your Windows 98 CD into the CD-ROM drive and click OK to continue. 10 of 32
Summary of the content on the page No. 12
Installation Guide Creative DSL USB 7410 RFC 2364 6. During this process, your PC will display the message The file adslusb.sys on (Unknown) cannot be found. At this time, re-insert the provided Creative DSL USB 7410 Installation CD and click OK to continue. 7. At this time, a dialog box will appear for you to enter the specific VPI and VCI values provided by your DSL Service Provider. Click OK to continue. Enter VPI and VCI values provided by your DSL Service Provider. 11 of 32
Summary of the content on the page No. 13
Installation Guide Creative DSL USB 7410 RFC 2364 ATTENTION! Depending on your DSL Service Provider, your VPI/VCI settings may already by preset. In this case, the VPI/VCI window, as shown below, will not appear. Continue to the next page to complete your Creative DSL USB 7410 installation. 12 of 32
Summary of the content on the page No. 14
Installation Guide Creative DSL USB 7410 RFC 2364 8. A dialog box similar to the one below appears confirming your successful installation of the Creative DSL USB 7410 device driver. Click Finish to complete the installation. 9. To complete your setup, Windows 98 will now prompt you to restart the computer. Click Yes to proceed. 13 of 32
Summary of the content on the page No. 15
Installation Guide Creative DSL USB 7410 RFC 2364 10. Once your computer has restarted in Windows 98, you will notice a DSL dial-up icon on your desktop. 14 of 32
Summary of the content on the page No. 16
Installation Guide Creative DSL USB 7410 RFC 2364 11. To connect to your DSL Service Provider, double-click on the DSL dial-up icon. A dial-up dialog box similar to the picture shown below will appear. The phone number 1234567 is the default number since your Creative DSL 7410 does not require dial-up. Any number that you specify in this field would work. However, due to Microsoft’s requirements, you will need to enter a phone number. 12. Enter your User name and Password to log on the subsc
Summary of the content on the page No. 17
Installation Guide Creative DSL USB 7410 RFC 2364 2.2 Uninstalling the Creative DSL 7410 This section provides you with instructions on how to uninstall your Creative DSL 7410. 1. From the Windows desktop, click Start -> Programs -> Creative -> Dsl -> Remove. 16 of 32
Summary of the content on the page No. 18
Installation Guide Creative DSL USB 7410 RFC 2364 2. A dialog box similar to the one below will appear confirming the uninstallation of the Creative DSL 7410 driver and utilities. Click Yes to finalize the uninstallation. 17 of 32
Summary of the content on the page No. 19
Installation Guide Creative DSL USB 7410 RFC 2364 18 of 32
Summary of the content on the page No. 20
Installation Guide Creative DSL USB 7410 RFC 2364 3 APPENDIX Purpose of this section This section provides additional information in regards to your Creative DSL 7410. The Appendix is organized as follows: 3.1 Appendix A - DSL Status Icon 3.2 Appendix B - Troubleshooting 3.1 Appendix A - DSL Status Icon The DSL Status icon is located at the lower right hand corner of your screen in the Systen Tray, as shown below. Your Desktop Windows System Tray DSL Status Icon Status Description Black
