National Instruments 6211 user manual

Summary of the content on the page No. 1

USER GUIDE
NI USB-6211/6218 OEM
This document provides information about the dimensions, mounting
options, connectors, and other components of the NI USB-6211/6218
OEM devices.
Caution There are no product safety, electromagnetic compatibility (EMC), or
CE marking compliance claims made for the USB-6211/6218 OEM devices.
Conformity to any and all compliance requirements rests with the end product
supplier.
Figure 1 shows the USB-6211 OEM and USB-6218 OEM devices.
USB-6211 USB-6218
Figure 1.

Summary of the content on the page No. 2

Dimensions Figure 2 shows the dimensions of the USB-6211 OEM device. Ø 0.130 (3.30) 6.250 (158.75) 5.877 (149.28) 5.372 (136.45) 2.582 (65.58) 3X Ø 0.142 (3.61) 0.489 (12.42) 0.373 (9.47) 0.373 (9.47) 0.000 (0.00) 0.433 (11.00) 0.516 (13.11) 0.063 (1.60) 0.000 (0.00) 0.091 (2.31) Ø 0.144 (Drill Size 27) Recommended Front Panel Hole Cutout for LED Figure 2. USB-6211 OEM Dimensions in Inches (Millimeters) NI USB-6211/6218 OEM User Guide 2 ni.com 0.000 (0.00) 0.420 (10.66) 0.420 (10.66) 1.321 (33.

Summary of the content on the page No. 3

Figure 3 shows the dimensions of the USB-6218 OEM device. Ø 0.130 (3.30) 6.250 (158.75) 5.877 (149.28) 5.372 (136.45) 2.582 (65.58) 3X Ø 0.142 (3.61) 0.489 (12.42) 0.373 (9.47) 0.373 (9.47) 0.000 (0.00) 0.433 (11.00) 0.516 (13.11) 0.063 (1.60) 0.000 (0.00) 0.091 (2.31) Ø 0.144 (Drill Size 27) Recommended Front Panel Hole Cutout for LED Figure 3. USB-6218 OEM Dimensions in Inches (Millimeters) © National Instruments Corporation 3 NI USB-6211/6218 OEM User Guide 0.000 (0.00) 0.000 (0.00) 0.340 (8

Summary of the content on the page No. 4

I/O Connector Pinouts Figure 4 shows the connector pinout on the USB-6211 OEM device. +5 V +5 V PFI 0 D GND PFI 1 D GND PFI 2 D GND PFI 3 D GND PFI 4 D GND PFI 5 D GND PFI 6 D GND PFI 7 D GND AO GND AO 0 AO GND AO 1 AI GND NC AI SENSE AI GND AI 0 AI 8 AI GND AI 1 AI 9 AI GND AI 2 AI 10 AI GND AI 3 AI 11 AI GND AI 4 AI 12 AI GND AI 5 AI 13 AI GND AI 6 AI 14 AI GND AI 7 AI 15 AI GND NC = No Connect Figure 4. USB-6211 OEM Connector Pinout NI USB-6211/6218 OEM User Guide 4 ni.com 1 2 3 4 5 6 7 8 9

Summary of the content on the page No. 5

Figure 5 shows the connector pinouts on the USB-6218 OEM device. +5 V +5 V +5 V +5 V PFI 0 D GND PFI 8 D GND PFI 1 D GND PFI 9 D GND PFI 2 D GND PFI 10 D GND PFI 3 D GND PFI 11 D GND PFI 4 D GND PFI 12 D GND PFI 5 D GND PFI 13 D GND PFI 6 D GND PFI 14 D GND PFI 7 D GND PFI 15 D GND AO GND AO 0 NC NC AO GND AO 1 NC NC AI GND NC AI GND NC AI SENSE AI GND AI SENSE 2 AI GND AI 0 AI 8 AI 16 AI 24 AI GND AI 1 AI GND AI 17 AI 9 AI GND AI 25 AI GND AI 2 AI 10 AI 18 AI 26 AI GND AI 3 AI GND AI 19 AI 11 A

Summary of the content on the page No. 6

Board Mounting the USB-621x OEM The USB-621x OEM device can be mounted on a motherboard using the 50-pin connector(s) and board mount socket(s), as shown in Figures 6 and 7. Note You can use either one or both 50-pin connectors to board mount the USB-6218 OEM device. 5 4 3 2 1 1 Mounting Standoff 4USB-6218 OEM Device 2 Board Mount Socket 5 Mounting Screws 3 50-Pin Connector Figure 6. USB-621x OEM Mounting Using 50-Pin Connectors (USB-6218 OEM Device Shown) Figure 7. USB-621x OEM Device Ins

Summary of the content on the page No. 7

Device Components Table 1 contains information about the components used for interfacing and interacting with the USB-621x OEM device. Table 1. USB-621x OEM Components Reference Designator(s) Manufacturer Component on PCB Manufacturer Part Number * 50-pin connector J6 , J7 3M N2550-6002UB USB connector J5 AMP 787780-1 † 50-pin board mount socket — 3M 8550-4500PL (or equivalent) ‡ Mounting standoff, — RAF Electronic M1261-3005-SS using board mount socket Hardware with M3× 0.5 screw ** Mounti