Toshiba NC1 user manual

Summary of the content on the page No. 1

ADJUSTABLE SPEED DRIVES
nC1 Drive

Summary of the content on the page No. 2

Ultra-Compact Sub-Micro Drive The nC1 is a sub-micro, or nano-sized drive with a full range of features to meet the needs of nearly any user. The nC1 is designed to be a simple drop in replacement for a starter on an existing project or as a new installation. Either way, the nC1’s small size and full featured design make it a perfect choice for your application. An Easy Choice The nC1 drive comes with either single-phase or three-phase input with input voltage ratings as low as 120 V. This

Summary of the content on the page No. 3

Easy-to-Use Easy To Program The nC1 uses a simple, straightforward programming menu for quick and easy setup of the drive. There are no complicated sub menus or “hidden” parameters. By using the built-in programming wizards, the nC1 can be programmed for simple operations with the push of a button. Available ® Windows programming software makes it a snap to set up the drive. User-Friendly Operation The nC1 comes ready to run. Simply mount the drive, run your power connections and you are

Summary of the content on the page No. 4

nC1 Drive Full-Scale CHARGE Lamp Display Input Displays the operating frequency, Indicates that high voltage is still Terminals parameter information, a monitored present within the inverter. Do not item, the cause of a failure, open the cover while this is lit. and so on. MONITOR Key PROGRAM Lamp Lights when the inverter is in Displays operating frequencies, parameter setting mode. This lamp parameter, and error messages. blinks when the parameter “AUH” or “Gr.U” is selected.

Summary of the content on the page No. 5

Standard Specifications nC1 ASD Standard Specifications Model Range 1001P-1007 P 2002P-2022P 2001PL-2022PL 2002P-2022P 230 V/Single Phase with Input Voltage Rating 120 V/Single Phase 230 V/Single Phase 230 V/Three Phase RFI / EMI Filter nC1 ASD Standard Specifications KW Range 0.1 to 0.75 KW 0.2 to 2.2 KW 0.1 to 2.2 KW 0.2 to 2.2 KW HP Model Range Range 1001P-1007P 1/8 to 1 HP 2002P-2022P 1/4 to 3 HP 2001PL-2022PL 1/8 to 3 HP 2002P-2022P 1/4 to 3 HP 230 V / Single Phase with Overload Ratin

Summary of the content on the page No. 6

nC1 ASD Standard Specifications Medium Voltage Motor Model Range 1001P-1007 P 2002P-2022P 2001PL-2022PL 2002P-2022P 230 V/Single Phase with Input Voltage Rating 120 V/Single Phase 230 V/Single Phase 230 V/Three Phase RFI / EMI Filter KW Range 0.1 to 0.75 KW 0.2 to 2.2 KW 0.1 to 2.2 KW 0.2 to 2.2 KW HP Range 1/8 to 1 HP 1/4 to 3 HP 1/8 to 3 HP 1/4 to 3 HP Overload Rating 150% for 60 Seconds Input Voltage Tolerance +10%, -15% +10%, -15% +10%, -15% +10%, -15% Input Frequency Rating 50/60 Hz 50