Summary of the content on the page No. 1
UNO-2173A/AF
Intel Atom Fanless Box PC with
1 x LAN, 2 x COM, Mini-PCIe
User Manual
Summary of the content on the page No. 2
Copyright This document is copyrighted, © 2009. All rights are reserved. The origi- nal manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmit- ted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer a
Summary of the content on the page No. 3
Product Warranty Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal- lation. Advantech assumes no liability under the terms of this warranty as a consequenc
Summary of the content on the page No. 4
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason
Summary of the content on the page No. 5
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letting it f
Summary of the content on the page No. 6
TURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. 23. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. UNO-2173A/AF User Manual vi
Summary of the content on the page No. 7
Contents Chapter 1 Overview ...........................................................2 1.1 Introduction ....................................................................... 2 1.2 Hardware Specifications ................................................... 3 1.3 Safety Precautions............................................................. 5 1.4 Chassis Dimensions........................................................... 6 Figure 1.1:UNO-2173A Chassis Dimensions................. 6 Figure 1.
Summary of the content on the page No. 8
Appendix A System Settings and Pin Assignments ..........24 A.1 System I/O Address and Interrupt Assignment....... 24 Table A.1: UNO-2173A/AF System I/O Ports............. 24 A.2 Board Connectors and Jumpers....................................... 26 Figure A.1: Connector & Jumper Locations (front) ..... 26 A.3 RS-232 Standard Serial Port (COM1~COM2) ............... 27 A.4 RS-422/485 Serial Port (UNO-2173AF)......................... 28 A.5 Power Connector (PWR)............................
Summary of the content on the page No. 9
2 1 Overview This chapter provides an overview of UNO-2173A/AF’s specifications. Sections include: • Introduction • Hardware specification • Safety precautions • Chassis dimensions CHAPTER
Summary of the content on the page No. 10
Chapter 1 Overview 1.1 Introduction UNO-2173A/AF is an embedded Application Ready Platform (ARP) that can shorten your development time and offers rich networking interfaces to fulfill extensive needs in different projects. Advantech’s Universal Network Controller is designed to be a total solution for network enabled Application Ready Platforms. Leveraging field-approved and worldwide approved real-time OS tech- nology, Advantech’s UNO-2000 series provides a Windows CE .NET and Wind
Summary of the content on the page No. 11
1.2 Hardware Specifications General • Certifications Energy Star, CE, FCC class A, UL, CCC • Dimensions (W x D x H)255 x 152 x 59 mm (10" x 6.0" x 2.3") • Enclosure Aluminum +SECC • Mounting Wallmount, DIN-rail, VESA • Industrial Grounding Isolation between chassis and power ground • Power Consumption 15 W (Typical) • Power Requirements 9 ~ 36 VDC (Min. 36 W), ATX • Weight 2.5 kg • OS Support Windows XPe/XP/CE 5.0 & 6.0, Linux • System Design Fanless design with no internal cabling Sy
Summary of the content on the page No. 12
I/O Interface • Serial Ports 2 x RS-232 • Serial Port Speed 50 ~ 115.2 kbps • LAN 1 x 10/100/1000 Base-T RJ-45 ports (Built-in boot ROM in flash BIOS) • USB Ports 2 x USB 2.0 Environment • Humidity 95% @ 40° C (non-condensing) • Operating TemperatureIEC 68 2-2 with 100% CPU/ I/O loading -20 ~ 70° C (-4 ~ 158° F) With no airflow: Up to 60° C • Ingress Protection IP40 • Shock Protection IEC 68 2-27CF: 50 G @ wallmount, 11 ms HDD: 20 G @ wall mount, half sine, 11 ms • Vibration Protec
Summary of the content on the page No. 13
1.3 Safety Precautions The following sections tell how to make each connection. In most cases, you will simply need to connect a standard cable. Warning! Always disconnect the power cord from your chassis whenever you are working on it. Do not connect while the power is on. A sudden rush of power can damage sensitive electronic compo- nents. Only experienced electronics personnel should open the chassis. Caution! Always ground yourself to remove any static electric charge before touchi
Summary of the content on the page No. 14
1.4 Chassis Dimensions Ø Ø Figure 1.1: UNO-2173A Chassis Dimensions UNO-2173A/AF User Manual 6
Summary of the content on the page No. 15
Ø Ø Figure 1.2: UNO-2173AF Chassis Dimensions 7 Chapter 1
Summary of the content on the page No. 16
1.5 Accessories Please refer below for the accessory list: • 3-pin connector for power wiring (Advantech P/N : 1652003206) • 5-pin connector for COM3 RS-422/485 ( UNO-2173AF only, Advantech P/N : 1652000177) • SATA signal cable (Advantech P/N : 1700006812) • SATA power cable (Advantech P/N : 1700004712) • 10 PCS jumper (Advantech P/N : 1653302122) • Keyboard/Mouse Y cable (Advantech P/N : 1700060202) • Driver DVD • Warranty card If anything is missing or damaged, contact your distribu
Summary of the content on the page No. 17
2 2 Hardware Functionality This chapter shows how to setup the UNO-2173A/AF’s hardware functions, including connecting peripherals, set- ting switches and indicators. Sections include: • Peripherals • RS-232 Interface • RS-422/485 Interface • LAN / Ethernet Connector • Power Connector • PS/2 Mouse and Keyboard Connector • USB Connector • VGA Display Connector • Battery Backup SRAM • Reset Button CHAPTER
Summary of the content on the page No. 18
Chapter 2 Hardware Functionality 2.1 Introduction The following two figures show the connectors on UNO-2173A/AF. The following sections give you detailed information about function of each peripheral. Figure 2.1: Front panel of UNO-2173A/AF Figure 2.2: Rear panel of UNO-2173AF 2.2 RS-232 Interface (COM1~COM2) The UNO-2173A/AF offers two standard RS-232 serial communication interface ports: COM1 and COM2. Please refer to A.3 for their pin assignments. IRQ and Address Setting The IRQ a
Summary of the content on the page No. 19
2.3 RS-422/485 Interface (UNO-2173AF) The UNO-2173AF offers one RS-422/485 serial communication interface ports: COM3. Please refer to Appendix A.4 for their pin assignments. The default setting of COM3 is RS-422. 2.3.1 RS-422/485 Selection The mode of UNO-2173AF COM3 can be selected in the BIOS. Please enter the BIOS setting screen and select the "Integrated Peripherals", then the follow screen would be shown. In the screen you can configure the resource and the mode. 2.3.2 Automatic Data
Summary of the content on the page No. 20
2.3.3 Termination Resistor (SW3) The onboard termination resistor (120 ohm) for COM3 can be used for long distance transmission or device matching. (Default Open.) Table 2.1: Terminal Resistor for COM3 SW3 Status DIP1 ON Add termial resistor on Tx+/Tx- of RS-422 or Data+/Data- of RS-485 OFF Open (default) DIP2 ON Add termial resistor on Rx+/Rx- of RS-422 OFF Open (default) 2.4 LAN: Ethernet Connector UNO-2173A is equipped with one Giga LAN controller and UNO- 2173AF has two. The controller c
