Summary of the content on the page No. 1
PCM-5820 Series
(PCM-5820/5820L/5820E/5822)
NS GXM Single Board
Computer with CPU SVGA/LCD,
Ethernet, Audio and TV-out
Interface
Summary of the content on the page No. 2
Acknowledgements AMD is a trademark of Advanced Micro Devices, Inc. Award is a trademark of Award Software International, Inc. IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corp. RTL is a trademark of Realtek Semi-Conductor Co., Ltd. C&T is a trademark of Chips and Technologies, Inc. UMC is a trademark of United Microelectronics Corporation.
Summary of the content on the page No. 3
Packing list Before you begin installing your card, please make sure that the following materials have been shipped: 1 PCM-5820 Series all-in-one single board computer 1 startup manual 1 utility disk/CD, driver, and manual (in PDF format) 1 2.5" IDE flat cable, 44-pin to 44-pin 1 keyboard / PS2 mouse cable 1 secondary serial port cable 1 parallel cable 1 floppy cable, for 3.5" FDD only 1 audio cable 1 USB cable The PCM-5820 Series’ Model Comparison Table GXM-
Summary of the content on the page No. 4
Contents CHAPTER 1 General Information ............................... 1 1.1 Introduction .................................................................. 2 1.2 Features ......................................................................... 3 1.3 Specifications ................................................................ 4 1.3.1 Standard SBC functions ........................................ 4 1.3.2 Local-bus flat panel/VGA interface ...................... 5 1.3.3 LVDS (Low Voltage Dif
Summary of the content on the page No. 5
2.9 Floppy drive connector (CN2) .................................. 20 2.9.1 Connecting the floppy drive................................ 20 2.10 Parallel port connector (CN3)................................... 21 2.11 Keyboard and PS/2 mouse connector (CN17) ......... 22 2.12 Power connectors ....................................................... 22 2.12.1 Main power connector +5 V, +12 V (CN9) ...... 22 2.12.2 Auxilary power connector (CN10) ................... 22 2.12.3 CPU fan power connecto
Summary of the content on the page No. 6
Chapter 3 Software Configuration ......................... 31 3.1 Introduction ................................................................ 32 3.2 Utility CD disk ............................................................ 32 3.3 VGA display software configuration........................ 33 3.4 Connections for two standard LCDs ........................ 35 3.4.1 Connections for Toshiba LTM10C042 (640 x 480 TFT color LCD) ................................ 35 3.4.2 Connections for Tos
Summary of the content on the page No. 7
5.2.2 Installation for Cyrix MediaGX Certified drivers for Windows 95/980. Insert the disk into the CD-ROM drive. ............................................................................ 57 5.2.3 Installation for Windows NT .............................. 61 Chapter 6 Audio....................................................... 67 6.1 Introduction ................................................................ 68 6.2 Installation of audio driver ....................................... 68 6.
Summary of the content on the page No. 8
CD audio connector (CN1) .................................................. 91 LVDS connector (CN15) ...................................................... 91 CPU fan power connector (CN6) ........................................ 91 S-Video connector (CN21) ................................................... 92 RCA (composite) connector (CN22) ................................... 92 ATX power feature connector (CN23) ............................... 93 ATX power button & power LED connector (CN24)
Summary of the content on the page No. 9
Tables Table 2-1: Jumpers ....................................................................... 10 Table 2-2: Connectors .................................................................. 11 Table 2-3: Audio power source setting ........................................ 23 Table 2-4: COM2 selection (J4) ................................................... 24 Table 2-5: Serial port default settings .......................................... 24 Table 2-6: LCD power setting ........................
Summary of the content on the page No. 10
Table B-3: Interrupt assignments ................................................. 98 Table B-4: 1st MB memory map.................................................. 99 Table D-1: PC/104 connectors (CN8) ........................................ 106 Figures Figure 1-1: PCM-5820 Series dimensions ..................................... 7 Figure 2-1: Jumpers ...................................................................... 12 Figure 2-2a: Connectors - component side (PCM-5820/L/E) ...... 13 Figur
Summary of the content on the page No. 11
1 General Information This chapter gives background informa- tion on the PCM-5820 Series. Sections include: • Board specifications Board layout and dimensions CHAPTER
Summary of the content on the page No. 12
1.1 Introduction The PCM-5820 Series is the ultimate cost-effective solution for limited space applications. It offers all the functions of an AT-compatible industrial computer on a single board and only occupies the space of a 3½" hard drive. The PCM-5820/5820L comes with an embedded high-performance GXM-233 processor on-board. The PCM-5820E and PCM-5822 come with a low power GXM-200 processor on-board. For maximum performance, the PCM-5820 Series also support an SDRAM SODIMM socket that can
Summary of the content on the page No. 13
1.2 Features Ultra-compact size single board computer as small as a 3 1/2" hard disk drive (145 mm x 102 mm) On-board NS GXM-233/200 CPU Up to 128 MB system memory by SODIMM (SDRAM) On-board VGA/LCD controller On-board LVDS interface (PCM-5820L and PCM-5820E only) On-board 100Base-T Ethernet interface (PCM-5820/5820E/ PCM-5822 only) On-board TV-out function, NTSC and PAL format (PCM-5822) Supports CompactFlash card Built-in Enhanced IDE (AT bus) hard disk drive interface On-
Summary of the content on the page No. 14
1.3 Specifications 1.3.1 Standard SBC functions CPU: - Embedded NS GXM-233 / 2.9 V (for PCM-5820/L) - Embedded NS GXM-200 / 2.2 V (for PCM-5820E/ PCM-5822) BIOS: AWARD 256 KB Flash memory Chipset: NS CX5530 System memory: One 144-pin SODIMM socket accepts up to 128 MB SDRAM Enhanced IDE interface: Supports up to two EIDE devices. BIOS auto-detect, PIO Mode 3 or Mode 4 transfer, Ultra DMA33 mode (ATA-4) up to 33 MB/sec. FDD interface: Supports up to two FDDs Serial ports: One serial
Summary of the content on the page No. 15
1.3.2 Local-bus flat panel/VGA interface Chipset: NS CX5530 Display memory: 1 ~ 4 MB share memory, set in BIOS Display type: Supports CRT and TFT LCD displays. Can display CRT and flat panel simultaneously Flat panel display mode: Panel resolution supports up to 1024 x 768 @ 18 bpp. Supports 18-bit TFT LCD panel CRT display mode: Non-interlaced CRT monitors resolutions up to 1280 x 1024 @ 256 colors or 1024 x 768 @ 16 bpp 1.3.3 LVDS (Low Voltage Differential Signal) interface (PCM-5820
Summary of the content on the page No. 16
1.3.6 Mechanical and environmental Dimensions (L x W): 145 mm x 102 mm (5.9" x 4.2") Power supply voltage: +5 V (4.75 ~ 5.25 V) Power consumption (typical) : - +5 V @ 3.0 A with GXM-233, 64 MB SODIMM and 40 MB CFC (PCM-5820) - +5 V @ 1.9 A with GXM-233, 64 MB SODIMM and 40 MB CFC (PCM-5820 Rev. A104 or higher - +5 V @ 1.5 A with GXM-200, 64 MB SODIMM and 40 MB CFC (PCM-5820E, PCM-5822) Operating temperature: 0 ~ 60° C (32 ~ 140° F) Weight: 0.77 kg (weight of total package) 1.3.7 Solid
Summary of the content on the page No. 17
1.4 Board layout and dimensions Figure 1-1: PCM-5820 Series dimensions Chapter 1 General Information 7
Summary of the content on the page No. 18
8 PCM-5820 Series User's Manual
Summary of the content on the page No. 19
2 Installation This chapter tells how to set up the PCM-5820 Series hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installa- tion procedure. CHAPTER
Summary of the content on the page No. 20
2.1 Jumpers and connectors Connectors on the board link it to external devices such as hard disk drives, a keyboard or expansion bus connectors. In addition, the board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the board jumpers and connectors: Table 2-1: Jumpers Label Function J1 Audio power source setting J2 Clear CMOS J3 Watchdog timer action J4 COM2 selector J5 Buzzer setting J6 LCD power selector J7
