Summary of the content on the page No. 1
N2PA-LITE / N2PAP-LITE
USER'S MANUAL
AMD Athlon XP/Athlon/Duron Processor M/B
NO. G03-N2PALITE1A
Release date: August 2003
Remark:
* Specifications and information contained in this manual are furnished for information use only, and are
subject to change at any time without notice, and shall not be construed as a commitment by manufacturer.
Summary of the content on the page No. 2
TABLE OF CONTENT USER’S NOTICE............................................................................................................ii MANUAL REVISION INFORMATION ..........................................................................ii COOLING SOLUTIONS ...............................................................................................ii CHAPTER 1 INTRODUCTION OF N2PA-LITE/N2PAP-LITE MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD..................................
Summary of the content on the page No. 3
USER’S NOTICE COPYRIGHT OF THIS MANUAL IS RESERVED BY THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIB
Summary of the content on the page No. 4
Chapter 1 Introduction of N2PA-LITE/N2PAP-LITE Motherboard 1-1 Features of Motherboard The all new N2PA-LITE and N2PAP-LITE is the lates
Summary of the content on the page No. 5
1-2 Specifications Spec Description Design ATX form factor 4 layers PCB size: 30.5x19.0cm ∗ Chipset ∗ nVIDIA nForce2 400 System Platform
Summary of the content on the page No. 6
1-3 Performance Table The following performance table indicates the testing results of some popular benchmark testing programs. The data
Summary of the content on the page No. 7
1-4 Layout Diagram & Jumper Setting LAN PRINTER GAME/MIDI PORT PS/2 MOUSE PS/2 KEYBOARD USB COM1 COM2A MIC LINE-IN LINE-OUT K/B
Summary of the content on the page No. 8
Jumpers Jumper Name Description Page JP1 Keyboard Power On Enabled/Disabled 3-pin Block P.6 JP4 USB Wake-Up Enabled/Disabled 3-pin Block
Summary of the content on the page No. 9
Chapter 2 Hardware Installation 2-1 Hardware installation Steps When installing the system, make sure to follow steps described in below:
Summary of the content on the page No. 10
Note: CPU Front Side Bus Frequency also can be changed in BIOS SETUP. Please refer to page 32 “Host Clock at Next Boot Is” selection in Misce
Summary of the content on the page No. 11
2-3 Install CPU 2-3-1 Glossary Chipset (or core logic) - two or more integrated circuits which control the interfaces between the system
Summary of the content on the page No. 12
Overheat Protect: Only for Athlon XP series CPU, when the CPU is overheated, system will automatically shut down power supply. You can hear
Summary of the content on the page No. 13
Figure 2-4 NOTE! When you install DIMM module fully into the DIMM socket the eject tab should be locked into the DIMM module
Summary of the content on the page No. 14
Standard Interrupt Assignments IRQ Priority Standard function 0 N/A System Timer 1 N/A Keyboard Controller 2 N/A Programmable Interrupt
Summary of the content on the page No. 15
2-5-4 AGP Slot The motherboard provides an AGP Slot, supporting the 4X/8X AGP VGA card. AGP SLOT 2-6 Connectors, Headers 2-6
Summary of the content on the page No. 16
(5) Parallel Port Connector (25-pin female): LPT Parallel port connector is a 25-pin D-subminiature receptacle connector. The onboard paral
Summary of the content on the page No. 17
(9) Primary IDE Connector (40-pin block): IDE1 This connector is for IDE hard disk ribbon cable connection. Connect the single plug end to
Summary of the content on the page No. 18
(2) USB Port Header (9-pin) : USB1/USB2 The headers are used for connecting the additional USB device. With an option USB cable, your can h
Summary of the content on the page No. 19
(8) Wake On-LAN Headers (3-pin) : WOL This connector connects to LAN card with WAKE ON-LAN output. When connected, a wake up signal recei
Summary of the content on the page No. 20
IR 2 6 Pin 1 5 IR infrared module Headers (11) CD Audio-In Headers (4-pin) : CDIN CDIN is the connector for CD-Audio input signal.