Summary of the content on the page No. 1
SBC-658
Half Size Intel FC-370 Pentium III
CPU Card with LCD, Ethernet &
SSD
Summary of the content on the page No. 2
Copyright Notice This document is copyrighted, 2000. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer ass
Summary of the content on the page No. 3
A Message to the Customer AAEON Customer Services Each and every AAEON product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new AAEON equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name AAEON has come to be known. Your satisfaction is our primary concern. Here is
Summary of the content on the page No. 4
Product Warranty AAEON warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of shipment. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel autho- rized by AAEON, or which have been subject to misuse, abuse, accident or improper installation. AAEON assumes no liability under the terms of this warranty as a consequence of such events
Summary of the content on the page No. 5
Packing list Before you begin installing your card, please make sure that the following materials have been shipped: 1 SBC-658 All-in-One Single Board Computer Card 1 Quick Installation Guide 1 Support CD contains the followings: -- User's Manual (this manual in PDF file) -- Ethernet drivers and utilities -- VGA drivers and utilities 1 hard disk drive (IDE) interface cable (44-pin, pitch 2.0mm) 1 floppy disk drive interface cable (34-pin, pitch 2.0mm) 1 6-pin mini-DIN dual outlet ada
Summary of the content on the page No. 6
Notice Dear Customer, Thank you for purchasing the SBC-658 board. This user's manual is designed to help you to get the most out of the SBC-658, please read it thoroughly before you install and use the board. The product that you have purchased comes with an two-year limited warranty, but AAEON will not be responsible for misuse of the product. Therefore, we strongly urge you to first read the manual before using the product. To receive the lastest version of the user manual, please vis
Summary of the content on the page No. 7
Contents Chapter 1: General Information............................ 1 Introduction ........................................................................... 2 Features .................................................................................. 3 Specifications ......................................................................... 4 Board layout ........................................................................... 7 Board dimensions ..............................................
Summary of the content on the page No. 8
Parallel port connector table (CN4) ........................................30 Serial ports (CN11, CN5)................................................... 31 IrDA connector (CN6, Pin 1~5)........................................ 32 Reset switch (CN6, Pin 6,7) .............................................. 33 External / internal speaker (CN6, Pin 8~11) .................. 34 Hard drive LED (CN6, Pin 13, 14)................................... 35 CPU fan power connector (CN7) ........................
Summary of the content on the page No. 9
Chapter 4: Flat Panel/CRT controller Display Drivers and Utilities ........................... 7 9 Software drives .................................................................... 80 Hardware configuration .......................................................... 80 Necessary prerequisites ..........................................................81 Before you begin .....................................................................81 Windows 95 ...........................................
Summary of the content on the page No. 10
1 General Information This chapter gives background informa- tion on the mainboard. Sections include: • Board specifications • Layout and dimensions Chapter 1 General Information 1 CHAPTER
Summary of the content on the page No. 11
Introduction The SBC-658 is an all-in-one Celeron/Pentium III FC-chip processor based single board computer (SBC) with a PCI Flat Panel controller, a PCI 100Base-T Ethernet interface. When using an Intel Pentium III processors, the SBC-658 achieves outstanding performance that surpasses any other SBC in its class. In addition, the onboard SSD interface supports M-Systems DiskOnChip 2000 series, memory capacity up to 288 MB. Onboard features include two serial ports (one RS-232, one RS-232/ 422/4
Summary of the content on the page No. 12
Features • Supports Intel Celeron /Pentium III FC-370 • Supports DiskOnChip (SSD) up to 288MB • C&T 69000 LCD controller supports 36-bit TFT Panels • 10/100Base-T Fast Ethernet • Supports H/W status monitoring Chapter 1 General Information 3
Summary of the content on the page No. 13
Specifications Standard SBC functions • CPU: FC-370 Pentium III (Coppermine), Celeron, and compatible CPUs (With system bus frequencies of 66/100MHz) • Bus interface: PISA bus • CPU socket: 370 pins Socket • BIOS: Award 256KB Flash BIOS • Chipset: Intel 440BX • I/O chipset: Winbond W83977TF with fully 16-bit I/O decoded • Memory : Onboard one 168 pins DIMM socket supports up to 256Mbytes SDRAM • Enhanced IDE: Supports two IDE devices. Supports Ultra DMA/ 33 mode with data transfer rate
Summary of the content on the page No. 14
• DMA: 7 DMA channels (8237 equivalent) • Interrupt: 15 interrupt levels (8259 equivalent) • Power management: I/O peripheral devices support power saving and doze/stanby/suspend modes. APM 1.2 ocmpliant • H/W status monitoring: Winbond W83781D H/W status monitoring IC supports power supply voltages, and temperatures monitoring Flat Panel/CRT Interface • Chipset: C&T 69000 • Display memory: 2MB SDRAM built in chip • Display type: Supports non-interlaced CRT and LCD (TFT, DSTN, and Mo
Summary of the content on the page No. 15
Mechanical and environmental • Power supply voltage: +5V (4.75V to 5.25V), +12V (11.4V to 12.6V) • Power requirement: +5V @ 4.1A(Celeron 300MHz) o o • Operating temperature: 32 to 140 F (0 to 60 C) • Board size: 7.3"(L) x 4.8"(W) (185mm x 122mm) • Weight: 0.5lb. (0.3 Kg) 6 SBC-658 User Manual
Summary of the content on the page No. 16
Board layout Chapter 1 General Information 7
Summary of the content on the page No. 17
Board dimensions 8 SBC-658 User Manual 0.00 0.00 0.00 0.00
Summary of the content on the page No. 18
2 Installation This chapter describes how to set up the main board hardware, including instruc- tions on setting jumpers and connecting peripherals, switches, and indicators. Be sure to read all the safety precautions before you begin the installation proce- dure. Chapter 2 Installation 9 CHAPTER
Summary of the content on the page No. 19
Jumpers and connectors Connectors on the board link it to external devices such as hard disk drives, a keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to configure your system to suit your application. The following tables list the function of each of the board's jumpers and connectors. Jumpers Label Function SW1 (S5, S6) DOC address select J1 LCD clock signal & driving voltage select J2 COM2 RS-232/422/485 select J3 COM2 RS-232/422/485 select J4 Clear
Summary of the content on the page No. 20
Label Function CN1 USB connector CN2 LCD display connector CN3 Internal keyboard connector CN4 Parallel port connector CN5 COM2 RS-232/422/485 serial port connector CN6 (Pin 1~5) IrDA connector CN6 (Pin 6, 7) Reset switch CN6 (Pin 8~11) External speaker CN6 (Pin 13, 14) IDE drive LED CN7 CPU fan power connector CN8 VGA display connector CN9 100Base-Tx Ethernet connector CN10 IDE hard drive connector CN11 COM1 RS-232 serial port connector CN12 Floppy drive connector CN15 Keyboard and PS/2 mouse c
