Summary of the content on the page No. 1
PCM-6896
Intel 815E compact board with PCI
slot, Audio, LAN, compact flash, 4
COM ports, PC/104 & PC/104 Plus
Summary of the content on the page No. 2
Copyright Notice This document is copyrighted, 2001. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. How
Summary of the content on the page No. 3
Packing List Before you begin installing your card, please make sure that the following materials are included: • 1PCM-6896 Intel 815E all in one CPU Card • 1 Quick Installation Guide • 1 Supporting CD-ROM that contains the following: •User’s Manual (this manual in PDF file) •VGA drivers and utilities •Audio drivers and utilities •Latest BIOS (as of the CD-ROM was made) If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Summary of the content on the page No. 4
A Message to the Customer AAEON Customer Services Each and every AAEON product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new AAEON equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name AAEON has come to be known. Your satisfaction is our primary concern. Here is
Summary of the content on the page No. 5
Product Warranty AAEON warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of shipment. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel autho- rized by AAEON, or which have been subject to misuse, abuse, accident or improper installation. AAEON assumes no liability under the terms of this warranty as a consequence of such events
Summary of the content on the page No. 6
Notice Dear Customer, Thank you for purchasing the PCM-6896 board. This user's manual is designed to help you to get the most out of the PCM- 6896, please read it thoroughly before you install and use the board. The product that you have purchased comes with an two- year limited warranty, but AAEON will not be responsible for misuse of the product. Therefore, we strongly urge you to first read the manual before using the product. To receive the latest version of the user manual, please
Summary of the content on the page No. 7
Contents Copyright Notice.....................................................................2 Packing List.............................................................................3 FCC STATEMENT.................................................................3 A Message to the Customer .................................................4 AAEON Customer Services .................................................4 Technical Support................................................................
Summary of the content on the page No. 8
PC/104 Plus Voltage Select (JP6).........................29 COM 2 Setting (JP8 &JP7)......................................30 CPU/SDRAM Setting (JP9)....................................31 Disk on Chip (JP10) ............................................................ 33 CPU and System Fan Power Connector (CN1).................36 USB Connector (CN5 &CN6)...............................37 IDE Hard Drive Connector (CN7)...............................38 IR Connector (CN10)............................
Summary of the content on the page No. 9
Power Management Setup...................................................76 PnP/PCI Configurations.......................................................80 PC Health Status..................................................................81 Frequency/Voltage Control..................................................82 Load Fail-Safe Defaults.......................................................83 Load Optimized Defaults.....................................................84 Set Supervisor Passwo
Summary of the content on the page No. 10
1 General Information This chapter gives background informa- tion on the PCM-6896. Sections include: • Card specifications • Card layout and dimensions CHAPTER
Summary of the content on the page No. 11
Introduction AAEON’s new compact size board PCM-6896 targets high-end multime- dia and networking applications. This board is supported by Intel Celeron and Pentium III CPUs, easy Upgrading allows you to take full advantage of Intel’s Development of even-higher speed Celeron and Pentium III CPUs. This is a perfect choice for embedded applications that Require cost-effective high computing power communications Products – whether video, voice, or data convergence over Internet Protocol network
Summary of the content on the page No. 12
Features • Supports both Intel FC-PGA Pentium III and Celeron CPU’s • High Speed Micro AGP 2X for VGA function onboard • One 10/100 Base-T Fast Ethernet • Supports H/W status monitoring • Integrated AC-97 2.1 SoundBlaster compatible PCI 3D Audio • Onboard Intel 815E controller supports 18/36-bit TFT panels • Supports DiskOnChip (SSD) and Compact flash memory • Four USB ports onboard • DVI Interface onboard
Summary of the content on the page No. 13
Specifications CPU: Intel FC-PGA 370-pin Pentium III and Celeron CPU’s (with system bus frequencies of 66/100/133MHz) CPU Socket: Intel socket 370 BIOS: Award 2MB Flash BIOS Chipset: Intel 815E I/O Chipset: ITE-8712. Fully 16-bit I/O decoded. Windond 83977EF as 2nd SIO for COM3, COM4 port. ISA bus interface: Winbond W83626 LPC to ISA bridge. Memory: Onboard One 168-pin DIMM socket supports up to 512 MBbytes SDRAM (PC 100/133 support) Enhanced IDE: Supports two IDE devices. Supports Ul
Summary of the content on the page No. 14
IrDA port: Support SIR and CIR Connector: One 6-pin (2.54mm) pin header KB/PS2 Mouse connector: A 7-pin (4*2-1) header supports PC/AT Keyboard and PS/2 mouse and Wake on KBD function. USB connectors: Two 10-pin header onboard supports four USB ports Connector: Two 10-pin (2.00mm) pin header Front Panel Connector: Provide the signals of RSTIN, HDD LED, Buzzer and Intrude Alarm input. Connector: 8-pin (2.54mm) pin header GPIO port: Support 4 general purpose I/O each with TTL level interfac
Summary of the content on the page No. 15
Audio Interface: Chipset: 815E Codec: ALC200 or compatible Interface: One 14-pin (2.00mm) pin header for MIC in, line in, line out, speaker out, CD-in. One 4 pin wafer for Speaker output of 1W + 1W. One 4 pin wafer for CD audio input Flat Panel/CRT Interface VGA: Onboard 815E Chipset output AGP port: AGP 2X (Default from Intel 815E built-in) Display memory: Share memory max to 4MB (Max) Display Type: Supports non-interlaced CRT and up to 18/36-bit LCD (TFT LCD only), can display both C
Summary of the content on the page No. 16
SDD Interface One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series up to 288MB. Mechanical and Environmental Power Supply voltage: +5V , +12V , +3.3V , -5V , -12V , -3.3V Operating temperature: 32 to 140 degrees F (0-60 degrees C) Board Size: 8” (L) x 5.75” (W) (203mm x 146mm) Weight: 1.2 lb. (0.5Kg)
Summary of the content on the page No. 17
CN11 CN15 CN21 JP4 CN5 CN20 CN9 CN6 CN24 CN7 CN1 CN16 CN19 JP9 CN13 CN18 Board Layout CN12 CN14 JP5 JP1 CN10 JP6 CN2 PCI1 CN25 CN4 JP8 CN22 JP7 CN17 CN3 JP3 JP2 JP10
Summary of the content on the page No. 18
Board Dimensions
Summary of the content on the page No. 19
2 Installation This chapter provides information regarding PCM-6896 hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedure. CHAPTER
Summary of the content on the page No. 20
Safety precautions Warning! Always completely disconnect the power cord from your chassis whenever you are working on it. Do not make connections while the power is on because sensitive electronic components can be damaged by the sudden rush of power. Only experienced electron- ics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. Use a grounding
