Summary of the content on the page No. 1
®
Intel Server Board SHG2
Product Guide
®
A Guide for Technically Qualified Assemblers of Intel Identified
Subassemblies/Products
Order Number: A90327-002
Summary of the content on the page No. 2
Disclaimer ® Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or
Summary of the content on the page No. 3
Contents 1 Description Server Board Features ......................................................................................................... 9 Back Panel Connectors ............................................................................................. 10 Server Board Connector and Component Locations .................................................. 11 Processor ................................................................................................................
Summary of the content on the page No. 4
3 Upgrading Tools and Supplies Needed................................................................................................ 43 Cautions............................................................................................................................. 43 Memory .............................................................................................................................. 44 Processors ..........................................................................
Summary of the content on the page No. 5
5 Solving Problems Resetting the System ......................................................................................................... 79 Initial System Startup..........................................................................................................79 Checklist.................................................................................................................... 79 Running New Application Software.......................................................
Summary of the content on the page No. 6
9 Equipment Log Worksheet Equipment Log ...................................................................................................................95 Index...................................................................................................................................... 97 Figures 1. Back Panel Connectors............................................................................................... 10 2. Server Board Connector and Component Locations..............
Summary of the content on the page No. 7
Tables 1. Server Board Features.................................................................................................. 9 2. Video Modes ............................................................................................................... 13 3. Software Security Features ......................................................................................... 19 4. Configuration Utilities ....................................................................................
Summary of the content on the page No. 8
viii Intel Server Board SHG2 Product Guide
Summary of the content on the page No. 9
1 Description Server Board Features Table 1. Server Board Features Feature Description ® Processor Up to two 1.8 GHz to 2.4 GHz Intel Xeon™ processors with 512K cache support packaged in a 603-pin micro Pin-Grid Array (PGA) System Bus Frequency 400 MHz Front Side Bus Memory (DRAM) Six 72-bit sockets for 184-pin, 200 MHz, 2.5 V, DDR200 or DDR266 compliant, registered, ECC, SDRAM single-sided or double-sided memory modules (DIMM) Video Memory 8 MB SDRAM of video memory PCI bus • One PC
Summary of the content on the page No. 10
Back Panel Connectors A JK BC E NIC2 NIC1 (Gbit) (10/100) DF G H I OM14358 A AC Power* G Video B USB 1, 2, 3 H NIC2 (Gbit) C Mouse I NIC1 (10/100) D Keyboard J ICMB/External SCSI Connector Knockout* E Parallel Port K Serial B Knockout* F Serial A * Intel SC5200 Base chassis shown here. Item may be different on your chassis. Figure 1. Back Panel Connectors 10 Intel Server Board SHG2 Product Guide
Summary of the content on the page No. 11
Server Board Connector and Component Locations II JJ KK LL HH A GG B FF C EE D DD E CC F BB G H AA I J K L M N Z O P Y Q X W V U T S R OM14357 A Primary Processor Socket (CPU1) T LVD SCSI B B CPU2 Fan U Battery C Secondary Processor Socket (CPU2) V LVD SCSI A D Front Panel USB W Jumper block CN53 E Serial B X Chassis Intrusion F Jumper Block CN27 Y PCI-X 64-bit/133 MHz G System Fan 5 Z PCI 32-bit/33 MHz H Floppy disk drive connector AA PCI-X 64-bit/100 MHz I Secondary IDE BB Syst
Summary of the content on the page No. 12
Processor ® The Intel Server Board SHG2 supports one or two Intel Xeon processors from 1.8 GHz to 2.4 GHz, with 512 KB of L2 advanced transfer cache packaged in a 603-pin micro-PGA (Pin-Grid Array). When two processors are installed, both processors must be identical. When only one processor is installed, the processor must be installed in the CPU1 socket, which is the socket closest to the corner of the server board. For a complete list of supported processors, see: http://support.inte
Summary of the content on the page No. 13
Add-in Board Connectors The server board has the following add-in board connectors: • Two 184-pin full-length, 3.3 V, PCI-X 64-bit/100 MHz connectors. • Three 120-pin full-length, 5 V, standard PCI 32-bit/33 MHz connectors. • One 184-pin full-length, 3.3 V, connector that is capable if PCI-X 64-bit/133 MHz operation. To enable PCI-X 64-bit/133 MHz operation, you must disable the onboard SCSI controller using BIOS Setup. See page 57 for more information on using BIOS Setup. The default
Summary of the content on the page No. 14
SCSI Controller The embedded Adaptec AIC-7899W dual function SCSI controller provides Ultra160 (LVDS), (Ultra 2), and Ultra wide (SE) SCSI interfaces as two independent PCI functions. The Intel SHG2 baseboard provides active terminators, termination voltage, resetable fuse, and protection diode for both SCSI channels. Modular RAID Capable PCI-X Slot 6 ® The SHG2 server board supports a modular RAID controller, such as the Intel RAID Controller SRCMR, on PCI-X Slot 6. An add-in card insta
Summary of the content on the page No. 15
Network Controllers The server board includes two integrated onboard Network Interface Controllers (NICs). One NIC is a 10BASE-T/100BASE-TX network solution based on the Intel 82550PM single-chip Fast Ethernet PCI Bus Controller. As a PCI bus master, the controller can burst data at up to 132 MB/s. The controller contains two receive and transmit FIFO buffers that prevent data overruns or underruns while waiting for access to the PCI bus. The controller has the following: • 32-bit PCI b
Summary of the content on the page No. 16
Adapter Fault Tolerance Adapter Fault Tolerance (AFT) is a simple, effective, and fail-safe approach to increase the reliability of server connections. AFT gives you the ability to set up link recovery to the server adapter in case of a cable, port, or network interface card failure. By assigning two server adapters as a team, AFT enables you to maintain uninterrupted network performance. AFT is implemented with two server adapters: a primary adapter and a backup, or secondary, adapter.
Summary of the content on the page No. 17
Keyboard and Mouse The keyboard/mouse controller is PS/2-compatible. If specified through the System Setup Utility (SSU), the server may be locked automatically if there is no keyboard or mouse activity for a predefined length of time. Once the inactivity (lockout) timer has expired, the keyboard and mouse do not respond until the previously stored password is entered. ACPI The SHG2 supports the Advanced Configuration and Power Interface (ACPI) as defined by the ACPI 1.0b. An ACPI-awar
Summary of the content on the page No. 18
Software Locks The BIOS Setup and the System Setup Utility (SSU) provide a number of security features to prevent unauthorized or accidental access to the system. Once the security measures are enabled, you can access the system only after you enter the correct password(s). For example: • Enable the keyboard lockout timer so that the server requires a password to reactivate the keyboard and mouse after a specified time-out period - 1 to 120 minutes. • Set and enable a supervisor password
Summary of the content on the page No. 19
Secure Mode Configure and enable the secure boot mode by using the SSU. When secure mode is in effect: • You can boot the server and the operating system will run, but you must enter the user password to use the keyboard or mouse. • You cannot turn off system power or reset the server from the front panel switches. Secure mode has no effect on functions enabled via the Server Manager Module or power control via the real time clock. Taking the server out of secure mode does not change the
Summary of the content on the page No. 20
Table 3. Software Security Features (continued) Feature Description Set a time-out period so Specify and enable an inactivity time-out period of from 1 to 120 minutes. that keyboard and mouse If no keyboard or mouse action occurs for the specified period, attempted input are not accepted keyboard and mouse input will not be accepted. Also, screen can be The monitor display will go blank, and the diskette drive will be write protected blanked, and writes to (if these security features a
