JVC Video Input Card IF-CF01PNG user manual

Summary of the content on the page No. 1

VIDEO INPUT CARD
INSTRUCTIONS
IF-CF01PNG
1
01_IF-CF01PNG_EN-f.p65 1 06.3.17, 10:41 AM
ENGLISH

Summary of the content on the page No. 2

Thank you for purchasing this JVC Input Card. In order to take full advantage of the card’s capabilities, please read and follow all instructions carefully before installing and using the card. Retain this booklet for future reference. Precautions Before installing this Input Card in your monitor, please read the Safety Precautions included in your monitor’s user manual. FCC NOTICE (U.S.A. only) CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the

Summary of the content on the page No. 3

Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation. Attention: This symbol is By disposing of this product correctly, you

Summary of the content on the page No. 4

Before Installation 7 Accessaries • Label (x 1): For placing to the rear panel and the remote control of the monitor after installing the Input Card. • Slot cover (x 1): For covering the blank slot. 7 Preparation •Wear gloves to protect your hands from metal parts on the Input Card’s board. •You will need a 6 mm Phillips screwdriver. •Turn off the monitor’s main power and unplug the power cable from the AC outlet. • Place the monitor with its LCD panel side down on a soft cloth so as not to dama

Summary of the content on the page No. 5

Installation (continued) Ex.: When installing only one Input Card 2. Insert the Input Card into the slot, Insert 1, then 2. fitting into the guides inside the Guide slot, so that its panel touches the bottom of the monitor. You can install the Input Card(s) into either left or right slot. When installing, follow the procedure below. • When installing two Input Cards: Install either of Input Cards into the left slot first. • When installing only one Input Card: Panel Slot cover (supplied) You nee

Summary of the content on the page No. 6

Controls and Features Front view Label Rear view 6 02_IF-CF01PNG_EN-f.p65 6 06.3.17, 10:42 AM

Summary of the content on the page No. 7

1 Audio signal input terminals Accepts analog audio signals. Connect only the L/MONO terminal for monaural sound. 2 Composite signal input/output terminals Accepts composite signals. See page 8 for the signal formats compatible with this input card. Select input by using the button on the monitor. Input select: INPUT C (SLOT-1)/E (SLOT-2) NTSC and PAL are switched by setting “COLOR SYSTEM” on the monitor. Refer to your monitor instruction manual for more information. NOTE: • The IN and OUT termi

Summary of the content on the page No. 8

Specifications Model name: IF-CF01PNG Type: Video Input Card Target monitors: Consult your dealer. Inputs/Outputs: Composite signal input/output: VIDEO: 1 line, BNC x 2, 1.0 V(p-p), 75 Ω • The IN and OUT terminals are bridge-connected (auto termination). Synchronized signal (Black burst signal) input/output: EXT. SYNC: 1 line, BNC x 2, 0.3 V(p-p), 75 Ω • The IN and OUT terminals are bridge-connected (auto termination). Audio signal input: AUDIO (L/MONO, R): 1 line, RCA x 2, 0.5 V(rms) Compliant

Summary of the content on the page No. 9

IF-CF01PNG VIDEO INPUT CARD © 2006 Victor Company of Japan, Limited 0306MKH-MW-VP Cover_IF-CF01PNG.p65 2 06.2.24, 9:08 AM