Summary of the content on the page No. 1
P5PE-VM
Motherboard
Summary of the content on the page No. 2
E2609 First Edition June 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1
Summary of the content on the page No. 3
Contents Notices ................................................................................................ vi Safety information ..............................................................................vii About this guide .................................................................................viii How this guide is organized ....................................................viii Where to find more information .............................................viii Conventions u
Summary of the content on the page No. 4
Contents 1.9 Jumpers .............................................................................. 1-21 1.10 Connectors ......................................................................... 1-23 1.10.1 Rear panel connectors .......................................... 1-23 1.10.2 Internal connectors ............................................... 1-24 Chapter 2: BIOS setup 2.1 Managing and updating your BIOS ........................................ 2-2 2.1.1 Creating a bootable floppy disk ..
Summary of the content on the page No. 5
Contents 2.5 Power menu ........................................................................ 2-24 2.5.1 Suspend Mode ...................................................... 2-24 2.5.2 ACPI 2.0 Support ................................................. 2-24 2.5.3 ACPI APIC Support ............................................... 2-24 2.5.4 APM Configuration ................................................ 2-25 2.5.5 Hardware Monitor .................................................. 2-26 2.6
Summary of the content on the page No. 6
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Summary of the content on the page No. 7
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power
Summary of the content on the page No. 8
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This manual contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. This chapter also lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboa
Summary of the content on the page No. 9
Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Typography Bold
Summary of the content on the page No. 10
P5PE-VM specifications summary ® ® ® CPU LGA775 socket for Intel Pentium D/ Pentium 4/ Celeron processor ® ® Supports Intel Dual-Core 65nm Intel processors ® Supports Intel Hyper-Threading Technology ® Supports Intel Enhanced Intel SpeedStep Technology (EIST) ® Chipset Northbridge: Intel 865G ® Southbridge: Intel ICH5 Front Side Bus 1066/800/533 MHz Memory Dual-channel memory architecture 2 x 184-pin DIMM sockets support up to 2GB of unbufferred non-ECC 400/333/2
Summary of the content on the page No. 11
P5PE-VM specifications summary Industry standard PCI 2.2, USB 2.0 Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME Internal 2 x USB 2.0 connectors for 4 additional USB 2.0 ports connectors 1 x CPU fan connector 1 x Chassis fan connector 1 x 20-pin ATX power connector 1 x 4-pin ATX 12 V power connector 1 x CD connector 1 x Front panel audio connector 1 x 10-pin Panel connector 1 x Speaker connector Power ATX power supply (with 20-pin and 4-pin 12
Summary of the content on the page No. 12
xii
Summary of the content on the page No. 13
This chapter describes the motherboard features and the new technologies it supports. Product 1 introduction ASUS P5PE-VM 1-1
Summary of the content on the page No. 14
1.1 Welcome! ® T h a n k y o u f o r b u y i n g a n A S U S P 5 P E - V M m o t h e r b o a r d ! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items. Motherboard ASUS P5PE-VM motherboard Cables 1 x S
Summary of the content on the page No. 15
® Intel 65nanometer process technology support ® The motherboard supports Intel processors built on the 65-nanometer (nm) process technology with copper interconnect. Intel’s 65 nm process is the most advanced chip manufacturing technology, delivering breakthrough performance, enhanced media experience, and low power consumption. ® The Intel 65 nm Dual-Core processors utilize this package technology for a thinner, lighter design without compromising performance. Dual-channel DDR400
Summary of the content on the page No. 16
Temperature, fan, and voltage monitoring The CPU temperature is monitored by the ASIC (integrated in the Winbond Super I/O) to prevent overheating and damage. The system fan rotations per minute (RPM) is monitored for timely xure detection. The ASIC monitors the voltage levels to ensure stable supply of current for critical components. 1.3.2 Innovative ASUS features ASUS EZ Flash BIOS With the ASUS EZ Flash, you can easily update the system BIOS even before loading the operating system
Summary of the content on the page No. 17
1.4 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninst
Summary of the content on the page No. 18
1.5 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 1.5.1 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part o
Summary of the content on the page No. 19
1.5.3 Motherboard layout 19.3cm (7.6in) KBPWR PS/2KBMS T: Mouse ATX12V B: Keyboard COM1 LGA775 VGA USB12 Intel Bottom: Top: 865G USB3 RJ-45 USB4 Top:Line In Center:Line Out R Below:Mic In AGP 4Mb BIOS Marvell 88E8001 PCI1 Intel SB_PWR ICH5 PCI2 USB78 CR2032 3V Lithium Cell PCI3 FP_AUDIO SPEAKER CMOS Power SATA1 SATA2 AD1888 CLRTC CD FLOPPY USB56 F_PANEL ASUS P5PE-VM 1-7 PARALLEL PORT Super I/O CPU_FAN P5PE-VM DDR DIMM_A1 (64 bit,184-pin module) DDR DIMM_B1 (64 bit,184-pin module) CHA_FAN SE
Summary of the content on the page No. 20
1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for ® ® the Intel Pentium 4 processor in the 775-land package. ® ® • Your boxed Intel Pentium 4 LGA775 processor package should come with installation instructions for the CPU, fan and heatsink assembly. If the instructions in this section do not match the CPU documentation, follow the latter. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket pin
