Sony 500A3WJ user manual

User manual for the device Sony 500A3WJ

Device: Sony 500A3WJ
Category: Computer Monitor
Manufacturer: Sony
Size: 2.41 MB
Added : 3/10/2013
Number of pages: 244
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Sony 500A3WJ. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony 500A3WJ.

For your convenience

If looking through the Sony 500A3WJ user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Sony 500A3WJ on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Sony 500A3WJ to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Sony 500A3WJ User manual - Online PDF
Advertisement
« Page 1 of 244 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony 500A3WJ but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Sony 500A3WJ. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

PFM-510A2WU/510A2WE/510A2WJ/510A2WG/500A3WU/500A3WE/500A3WJ/500A3WG
4-076-854-01 (1)
Flat Panel Monitor
GB
Operating Instructions
FR
Mode d’emploi
DE
Bedienungsanleitung
ES
Manual de instrucciones
IT
Istruzioni per l’uso
JP







PFM-510A2WU/510A2WE/510A2WJ/510A2WG
PFM-500A3WU/500A3WE/500A3WJ/500A3WG
ª 2000 Sony Corporation

Summary of the content on the page No. 2

For PFM-510A2WE/510A2WG/500A3WE/ 500A3WG users WARNING THIS APPARATUS MUST BE EARTHED IMPORTANT Owner’s Record The wires in this mains lead are coloured in accordance with The model and serial numbers are located on the rear. the following code: Record the model and serial numbers in the spaces provided Green-and-yellow : Earth below. Refer to these numbers whenever you call upon your Blue : Neutral Sony dealer regarding this product. Brown : Live Model No. Serial No. As the colours of the wires

Summary of the content on the page No. 3

English Table of Contents Precautions ............................................................... 5 (GB) Features..................................................................... 6 (GB) Location and Function of Parts and Controls ....... 7 (GB) Front / Sides ............................................................. 7 (GB) Control Panel ........................................................... 8 (GB) Right Connector Panel ............................................. 9 (GB) Left Con

Summary of the content on the page No. 4

Selecting the On-screen Language ...................... 31 (GB) Reducing Afterimage/Ghosting (Screen Saver Function).................................... 31 (GB) Reversing the Image .............................................. 31 (GB) Changing the Display Position Automatically....... 33 (GB) Controlling Power On/Off Automatically (Power Control Function) ............................................... 34 (GB) Power Saving Function .......................................... 34 (GB) On/Off Timer

Summary of the content on the page No. 5

Precautions On repacking Do not throw away the carton and packing materials. Precautions They make an ideal container in which to transport the unit. When shipping the unit to another location, On safety repack it as illustrated on the carton. • Operate the unit on 100 to 120 V AC or 220 to 240 V AC. If you have any questions about this unit, contact your • A nameplate indicating operating voltage, power authorized Sony dealer. consumption, etc. is located on the rear. • Should any solid object

Summary of the content on the page No. 6

Features Other features • Three sets of video inputs with audio inputs: one Features composite video or Y/C input, one RGB input, and one RGB/component input. The PFM-510A2W/500A3W series are 16:9 42-inch • Displays the HDTV signal with a tri-level sync flat panel monitors adopting a PDP (Plasma Display signal. Panel), which can accept various types of signals with • Three dimensional comb filter for NTSC Y/C the built-in scan converter. separation. • Line correlation comb filter for PAL Y/C sep

Summary of the content on the page No. 7

Location and Function of Parts and Controls 5 Right connector panel For details on the right connector panel, see “Right Location and Function Connector Panel” on page 9 (GB). of Parts and Controls 6 Right panel cover Open this when using the right connector panel. For details on opening the panel cover, see below. Front / Sides To open the panel cover Front Loosen the screws counterclockwise and open the cover. 1 2 To take off the panel cover Loosen the screws as illustrated below and take off

Summary of the content on the page No. 8

Location and Function of Parts and Controls Control Panel VOL – VOL + MENU mM ENT RGB1 YUV RGB2 LINE Y/C CTRL 1 qd qs qa 0 98765 4 3 2 1 1 Remote control detector 9 RGB1 button Receives the beam from the Remote Commander. Selects the RGB signal input from the RGB1 connectors. 2 1 (standby) switch/1 (standby) indicator 0 ENT (enter) button Press to turn on the monitor. Press again to go back to the standby mode. Press to select the desired item from the menu The 1 (standby) indicator lights up in

Summary of the content on the page No. 9

Location and Function of Parts and Controls 1 RGB1 IN connectors Right Connector Panel R (R-Y)/G (Y)/B (B-Y) IN (BNC-type): Inputs an analog RGB signal or a component signal. Connects to the RGB signal or component (Y/B- Y/R-Y) signal output of a computer or video equipment. RGB 1 IN OUT This monitor also accepts an HD analog R R-Y component (Y/PB/PR) signal. Inputs the PB signal to the B (B-Y) IN connector and PR signal to the G Y R (R-Y) IN connector. HD/COMP IN (BNC-type): Inputs an H sync si

Summary of the content on the page No. 10

Location and Function of Parts and Controls 4 RGB1 OUT connectors 6 REMOTE (RS-232C) connector (mini DIN 8- These connectors are used as loop-through outputs of pin) the RGB1 IN connectors 1. This connector allows remote control of the monitor When the plug is connected to the RGB OUT using the RS-232C protocol. For details, contact your connectors, the 75-ohms termination of the RGB IN authorized Sony dealer. connectors is released, and the signal input to the RGB IN connectors is output from t

Summary of the content on the page No. 11

Location and Function of Parts and Controls 2 CONTROL S IN/OUT jacks (mini jacks) Remote Commander RM-921 Connects to the CONTROL S jacks of video equipment or another monitor. Then you can simultaneously control all equipment with a single Remote Commander. 1 To control equipment by aiming the supplied Remote qs MUTING DISPLAY POWER Commander at the remote control detector of the 2 monitor, connect the CONTROL S OUT jack of the RGB1 RGB2 YUV 3 qd monitor and the CONTROL S IN jack of the other L

Summary of the content on the page No. 12

Location and Function of Parts and Controls 5 Y/C button qk MENU button Selects the signal input from the Y/C IN jack in the Press to make the menu appear. LINE connectors. ql ENTER button 6 Number buttons Press to select the desired item in a menu. Press to select the index number. w; VOL +/– buttons 7 ZOOM button Press the + button to increase the volume, or the – Each time you press this button, the image size button to decrease the volume. changes (in order) to double (· 2), triple (· 3), qu

Summary of the content on the page No. 13

Installation Caution Installation • When you install the monitor, make sure there is more space than that shown in the figure below. Using the Retractable Feet • The ambient temperature must be 0 °C to +35 °C (32 °F to 95 °F). This section describes the installation arrangements for installing the monitor. When using the retractable feet 1 Pull out the knobs and pull down the retractable Front feet. Wall 7 20 (7 /8) 10 10 Wall Wall (4) (4) 2 Turn the retractable feet outward. Floor 2.5 (1) Side

Summary of the content on the page No. 14

Installation / Connections Side 7 3.5 (1 /16) Connections Connecting the AC Power Cord Wall 1 Plug the power cord into the AC IN socket. Then, attach the AC plug holder (supplied) to the AC power cord. Units: cm (inches) AC power Hooked on the wall: Vertically cord AC IN socket Front Wall AC plug holder 10 (4) 20 25 7 7 (7 /8) (9 /8) Wall Wall 2 Slide the AC plug holder over the cord until it connects to the AC IN socket cover. Make sure that the control AC IN section is at the socket bott

Summary of the content on the page No. 15

Connections Computer Betacam SP video cassette recorder to component signal output * to R(R-Y)/G(Y)/ RGB 1 B(B-Y), HD/COMP, to audio to video to video IN OUT to audio VD IN R output output output R-Y output G Y B B-Y to audio * to R(R-Y)/G(Y)/ output HD/ COMP B(B-Y) IN SYNC VD to AUDIO IN to AUDIO IN L AUDIO R RGB 2 RGB IN L to RGB IN AUDIO IN R to AUDIO IN VIDEO to Y/C or VIDEO IN Y/C L AUDIO R IN OUT to AUDIO IN LINE to video to audio output output VCR, laser disc player, game machine, etc. *

Summary of the content on the page No. 16

Using On-screen Menus 4 Press M/m to adjust or select the setting and press Using On-screen Menus ENT to set. The setting is registered and the menu returns to the previous menu. Operating Through Menus To return to the normal screen, press the MENU button repeatedly until the menu disappears. Menu operating buttons There are four buttons on the monitor and the Remote Menu Guide Commander for menu operations. Note Remote Commander Control Panel “– – – –” appear

Summary of the content on the page No. 17

Using On-screen Menus 6 COLOR TEMP qf ASPECT Changes color temperature. Sets the aspect ratio of the picture to 4:3, 16:9 or For details, see “COLOR TEMP” on page 23 (GB). wide-zoom size. For details on the wide-zoom, see “Enlarging a 4:3 Image to a 16:9 Screen Naturally (Wide Zoom Mode)” on page 27 7 SHARPNESS (GB). Changes the outline correction level in three levels (HIGH, MID or LOW). qg ZOOM For details, see “SHARPNESS” on page 24 (GB). Enlarges the image (in order) to double (· 2), triple

Summary of the content on the page No. 18

Using On-screen Menus ql COLOR SYSTEM wh SAVE Selects the input signal. Saves the settings. AUTO: to display NTSC, PAL or SECAM signals 443NT: to display NTSC4.43 signals REMOTE menu PAL60: to display PAL60 signals This menu is used for remote control settings. w; SCREEN FILL Selects the point of origin for resizing the picture. CENTER: Sets the point of origin on the center of REMOT E wj the monitor. I NDEX No . : 001 REMOT E MODE : T V wk CORNER: Sets the point of origin at the upper-left REMO

Summary of the content on the page No. 19

Using On-screen Menus eg FAN STATUS menu The cooling fans are built into this monitor. This item indicates whether the cooling fans work properly. This menu is used for displaying the internal condition OK: Normal of the monitor. NG: Unusual When the cooling fans are not working normally, NG is displayed and the item flashes in red. The 1 STATUS e; MOD E L N A ME : P F M - 5 1 0 A 2WU ea indicator on the control panel also flashes. SER I A L No . : 2800001 OP ERA T I ON : 0 0 0 0 0 1 H es SOF TW

Summary of the content on the page No. 20

Watching the Picture Note Watching the Picture We recommend input source video equipment equipped with a TBC (time base corrector). If the Before you start monitor receive a signal without TBC, the picture may • Turn on the monitor. disappear due to disturbance of the sync signal. • Turn on the connected equipment and play a video source. Switching the Display Mode • To display the input signal information on the screen when turning on the power or switching the input signal, set “DISPLAY” in th


Alternative user manuals
# User manual Category Download
1 Sony BVM-L170 User manual Computer Monitor 7
2 Sony DDM-2802CNU User manual Computer Monitor 1
3 Sony BVM-D20F1U, BVM-D20F1E, BVM-D20F1A, BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA, BVM-D32E1WU, BVM-D32E1WE, BVM-D32E1WA User manual Computer Monitor 15
4 Sony 500A3WE User manual Computer Monitor 8
5 Sony CPD-17SF2 User manual Computer Monitor 10
6 Sony AEP MODEL CPD-E200E User manual Computer Monitor 9
7 Sony CPD-G400 User manual Computer Monitor 9
8 Sony CPD-E220E User manual Computer Monitor 5
9 Sony CPD-110GS User manual Computer Monitor 1
10 Sony BVM-D SERIES BVM-D14H1E User manual Computer Monitor 14
11 Sony CPD-100SFT User manual Computer Monitor 5
12 Sony DELUXEPRO SDM-X93 User manual Computer Monitor 21
13 Sony CPD-G400P User manual Computer Monitor 4
14 Sony CPD-110EST User manual Computer Monitor 9
15 Sony BVM-D32E1WU, BVM-D32E1WE, BVM-D32E1WA, BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA, BVM-D20F1U, BVM-D20F1E, BVM-D20F1A User manual Computer Monitor 27
16 Sony BVM-L170 User manual Computer Monitor 7
17 Sony DDM-2802CNU User manual Computer Monitor 1
18 Sony BVM-D20F1U, BVM-D20F1E, BVM-D20F1A, BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA, BVM-D32E1WU, BVM-D32E1WE, BVM-D32E1WA User manual Computer Monitor 15
19 Sony 500A3WE User manual Computer Monitor 8
20 Sony CPD-17SF2 User manual Computer Monitor 10