Summary of the content on the page No. 18
18 en | Exploded View Small Size LCD/LED Monitors 3 Exploded View Figure 3.1 Front Panel Ref. Button Description 1 Speaker Generate sounds from the input audio signal. 2 Input Selects the signal to be displayed. Serves as the “Enter” function for OSD menus. 3 Menu Selects the on-screen display (OSD). 4 Adjusts the value when in the Scrolls up in the OSD. OSD. 5 Adjusts the value when in the Scrolls down in the OSD or auto adjusts when in OSD. PC mode. 6 Decreases the value when in Scrolls left
Summary of the content on the page No. 19
Small Size LCD/LED Monitors Exploded View | en 19 Figure 3.2 Rear Panel (UML-080-90, UML-082-90) Ref Connector Ref Connector 1 Audio In (for external audio) 7 S-Video In 2 AV1 In 8 12 VDC In 3 AV1 Out 9 Adjustable Stand 4 AV2 In 10 Trigger Input 5 AV2 Out 11 RS-232 In (for firmware update) 6VGA In Bosch Security Systems, Inc. User Manual F.01U.134.499 | 1.0 | 2009.07
Summary of the content on the page No. 20
20 en | Exploded View Small Size LCD/LED Monitors Figure 3.3 Rear Panel (UML-100-90, UML-102-90) Ref Connector Ref Connector 1 Audio In (for external audio) 7 S-Video In 2 AV1 In 8 12 VDC In 3 AV1 Out 9 Adjustable Stand 4 AV2 In 10 Trigger Input 5 AV2 Out 11 RS-232 In (for firmware update) 6VGA In F.01U.134.499 | 1.0 | 2009.07 User Manual Bosch Security Systems, Inc.
Summary of the content on the page No. 1
Small Size LCD/LED Monitors
UML-080-90 | UML-082-90 | UML-100-90 | UML-102-90
en User Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Small Size LCD/LED Monitors Table of Contents | en 3 Table of Contents 1Safety 5 1.1 Important safety instructions 5 1.2 Safety precautions 8 1.3 Important notices 8 1.4 Customer Support and Service 15 2 Unpacking 17 2.1 Parts List 17 3 Exploded View 18 4 Description 21 4.1 Features 21 4.2 Power 22 5 Installing the Monitor 23 5.1 Ventilation 23 5.2 Mounting the Monitor 23 5.2.1 Desktop Installation 23 5.2.2 Wall Mount Installation 24 5.3 Connecting the Composite Video Signal to the Monitor 24 5.
Summary of the content on the page No. 4
4 en | Table of Contents Small Size LCD/LED Monitors 6.6 Setup Menu 34 7 Power Management 36 7.1 Power Consumption 36 7.2 LED Indicator 36 8Troubleshooting 37 9 Maintenance 38 10 Technical Specifications 39 10.1 UML-080-90/UML-100-90 39 10.2 UML-082-90/UML-102-90 40 F.01U.134.499 | 1.0 | 2009.07 User Manual Bosch Security Systems, Inc.
Summary of the content on the page No. 5
Small Size LCD/LED Monitors Safety | en 5 1Safety 1.1 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff- free cloth or leather shammy may also be used.
Summary of the content on the page No. 6
6 en | Safety Small Size LCD/LED Monitors disconnect the cable system. This will prevent damage to the unit from lightning and power line surges. 7. Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure. 8. Overloading - Do not overload outlets and extension
Summary of the content on the page No. 7
Small Size LCD/LED Monitors Safety | en 7 personnel when any damage to the equipment has occurred, such as: – the power supply cord or plug is damaged; – exposure to moisture, water, and/or inclement weather (rain, snow, etc.); – liquid has been spilled in or on the equipment; – an object has fallen into the unit; – unit has been dropped or the unit cabinet is damaged; – unit exhibits a distinct change in performance; – unit does not operate normally when the user correctly follows the operat
Summary of the content on the page No. 8
8 en | Safety Small Size LCD/LED Monitors 1.2 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided,
Summary of the content on the page No. 9
Small Size LCD/LED Monitors Safety | en 9 Coax grounding: – Ground the cable system if connecting an outside cable system to the unit. – Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source. – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal. – Follow proper safety precautions such
Summary of the content on the page No. 10
10 en | Safety Small Size LCD/LED Monitors NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic- sensitive printed circuit boards. Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60). Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug
Summary of the content on the page No. 11
Small Size LCD/LED Monitors Safety | en 11 Power lines - Do not locate the display near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. Rack-mount – Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions. The equipment must not exceed its maximum operating temperature requirements. – Mechanical loading - Properly mount the equ
Summary of the content on the page No. 12
12 en | Safety Small Size LCD/LED Monitors NOTICE! This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: – this device may not cause harmful interference, and – this device must accept any interference received, including interf
Summary of the content on the page No. 13
Small Size LCD/LED Monitors Safety | en 13 Informations FCC et ICES (modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes : – cet appareil ne peut pas provoquer d'interférence nuisible et – cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement. AVERTISSEMENT : Suite à di
Summary of the content on the page No. 14
14 en | Safety Small Size LCD/LED Monitors Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIE
Summary of the content on the page No. 15
Small Size LCD/LED Monitors Safety | en 15 NOTE! This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the pr
Summary of the content on the page No. 16
16 en | Safety Small Size LCD/LED Monitors Asia Region Repair Center Telephone: 65 63522776 Fax: 65 63521776 E-mail: rmahelpdesk@sg.bosch.com Customer Service Telephone: 86 (0) 756 7633117 or 86 (0) 756 7633121 Fax: 86 (0) 756 7631710 E-mail: customer.service@cn.bosch.com Warranty and more information For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecurity.com. F.01U.134.499 | 1.0 | 2009.07 User Manu
Summary of the content on the page No. 17
Small Size LCD/LED Monitors Unpacking | en 17 2 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit
