HP (Hewlett-Packard) Hewlett-PackardHP 2309M user manual

Summary of the content on the page No. 1

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 2309m
HP 2309v
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and

Summary of the content on the page No. 2

refractory ceramic fibers Components, parts and materials containing 0 radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1: Bushing Screwdriver (HEX5.5MM) Description #2: Crossing Screwdriver 2# Description #3 Description #4 Description #5 3.0 Product Disassembly Process

Summary of the content on the page No. 3

Disassembly Flowchart for HP 2309 Model Issue Date: Dec. 31, 2008 Initiator: Candy Zheng Photo Action Tool Lay the Monitor on the desk. N/A Remove the VESA mounting cover with N/A hand. Unlock the 4 screws which they fix the #2 Crossing Screw Driver VESA mounting by #2 scewdriver. Unlock the 4 screws which they fix the #2 Crossing Screw Driver stand by 2# screwdriver. Remove the front bezel out with hand. N/A Remove the back cover out with hand. N/A

Summary of the content on the page No. 4

Unlock the 6 screws which fix the #2 Crossing Screw Driver speaker grill ,and take the sub-bezel out. Take the keypad out. N/A Unlock the 2 screws which fix the chassis and panel, and then pull the #2 Crossing Screw Driver LVDS out . Unlock 2 screws for DVI port, D-SUB port, Power port, and 7 screws which #2 Crossing Screw Driver and they fix between chassis PCA boards, #1 Bushing Screw Driver power board and IF board. Pull the wires out. Unlock the 2 screws which they fix between the bottom-sid

Summary of the content on the page No. 5

Remove the arm-rear and then unlock the 4 screws which they fix between the #2 Crossing Screw Driver arm-front and the rion. The panel N/A

Summary of the content on the page No. 6

Summary of the content on the page No. 7

Technical Notification Technical Notification - Sequence of Module Disassembly for Lamp Separation – - Sequence of Module Disassembly for Lamp Separation – ( LTM230HT01 ) ( LTM230HT01 ) DATE : Oct. 08, 2008 Application Engineering 1 , HD development, LCD Business Any of information, data and/or records in these documents shall be treated as “CONFIDENTIAL” and no copy thereof shall be allowed without sender's prior written authorization. The disclosure of these documents shall be made to thos

Summary of the content on the page No. 8

Sequence of Module Disassembly for Lamp Separation Sequence of Module Disassembly for Lamp Separation LTM230HT01 Module front and rare side Disassemble top chassis and PCB cover 1 / 3

Summary of the content on the page No. 9

Sequence of Module Disassembly for Lamp Separation Sequence of Module Disassembly for Lamp Separation Disassemble the panel from the Mold frame Disassemble the mold frame, sheets and diffuser plate from the bottom chassis 2 / 3

Summary of the content on the page No. 10

Sequence of Module Disassembly for Lamp Separation Sequence of Module Disassembly for Lamp Separation Separate side mold to pull out lamp Separate lamp from backlight 3 / 3

Summary of the content on the page No. 11

Summary of the content on the page No. 12

Summary of the content on the page No. 13

Summary of the content on the page No. 14

Summary of the content on the page No. 15