Summary of the content on the page No. 1
HP LD4201, LD4210 and LD4710
Digital Signage Displays
User Guide
Summary of the content on the page No. 2
© 2010, 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyr
Summary of the content on the page No. 3
About this guide This guide provides information on setting up the display, installing drivers, using the On-Screen Display menu, troubleshooting, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important sup
Summary of the content on the page No. 4
iv About this guide ENWW
Summary of the content on the page No. 5
Table of contents 1 Product features ............................................................................................................... 1 HP Digital Signage models ........................................................................................................ 1 Accessories ............................................................................................................................. 1 Optional accessories ......................................................
Summary of the content on the page No. 6
Downloading from the Web ..................................................................................... 29 Using the auto-adjustment function (RGB INPUT source only) ........................................................ 30 Using the On-Screen Display menu ........................................................................................... 30 Using the remote control to adjust the OSD ................................................................ 31 OSD menu selections ........
Summary of the content on the page No. 7
Transmission/Receiving Protocol .............................................................................................. 59 01. Power (Command: a) ......................................................................................... 59 02. Input Select (Command: b) (Main Picture Input) ..................................................... 61 03. Aspect Ratio (Command: c) (Main picture format) ................................................. 62 04. Screen Mute (Command: d) ............
Summary of the content on the page No. 8
41. Power On Delay (Command: f h) ........................................................................ 85 42. Language (Command: f i) ................................................................................... 85 43. DPM Select (Command: f j) ................................................................................ 86 44. Reset (Command: f k) ........................................................................................ 86 45. Energy saving (Command: f I) ...........
Summary of the content on the page No. 9
1 Product features HP Digital Signage models The HP LCD digital signage displays have a wide-aspect active matrix thin-film transistor (TFT) panel. The displays features include the following: ● HP LD4201 model, 106.7 cm (42-inch diagonal) widescreen viewable area display with 1920 x 1080 native resolution ● HP LD4210 model, 106.7 cm (42-inch diagonal) widescreen viewable area display with 1920 x 1080 native resolution ● HP LD4710 model, 119.28 cm (47-inch diagonal) widescreen viewable area disp
Summary of the content on the page No. 10
● Power cord ● DisplayPort cable ● HDMI cable ● RGB (VGA) cable Optional accessories Optional accessories (purchased separately) might vary depending on the model. ● Stand kit ● Speakers kit ● Wall mount kit 2 Chapter 1 Product features ENWW
Summary of the content on the page No. 11
2 Safety and maintenance guidelines Important safety information A power cord is included with the display. If another cord is used, use only a power source and connection appropriate for this display. For information on the correct power cord set to use with the display, refer to the Power cord set requirements on page 95. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important safety feature
Summary of the content on the page No. 12
Maintenance guidelines To enhance the performance and extend the life of the display: ● Do not open the display cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the display is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. ● Use only a power source and connection appropriate for this display, as indicated on the label/ back plate of the display
Summary of the content on the page No. 13
Cleaning the display 1. Turn off the display and unplug the power cord from the back of the unit. 2. Dust the display by wiping the screen and the cabinet with a soft, clean antistatic cloth. 3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol. CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen surface. It might seep behind the bezel and damage the electronics. CAUT
Summary of the content on the page No. 14
3 Setting up the display To set up the display, ensure that the power is turned off to the display, media player/computer system, and other attached devices, and then follow the instructions below. Installing the stand (sold separately) 1. Take the parts for the stand out of the box. ● HP LD4201 and LD4210—Four screws M4 x 32 mm (1.26 in) and stand Figure 3-1 HP LD4201 and LD4210—Stand accessory contents ● HP LD4710—Four screws M4 x 10 mm (0.39 in) and stand Figure 3-2 HP LD4710—Stand accessor
Summary of the content on the page No. 15
2. Place a soft cloth on the table and place the display with the screen facing downward. Connect the stand as shown in the following figure. Figure 3-3 HP LD4201 and LD4210—Sliding the stand onto the display Figure 3-4 HP LD4710—Sliding the stand onto the display Installing the stand (sold separately) ENWW 7
Summary of the content on the page No. 16
3. Use the screws to secure the stand on the rear side of the product as shown in the figure. Figure 3-5 HP LD4201 and LD4210—Securing the stand to the display Figure 3-6 HP LD4710—Securing the stand to the display 8 Chapter 3 Setting up the display ENWW
Summary of the content on the page No. 17
Connecting the speakers (sold separately) 1. Mount the speakers onto the display. Figure 3-7 Mounting the speakers 2. Use the four Taptite D3 x 12 mm (0.47 in) screws to secure the speakers to the display. Figure 3-8 Securing the speakers to the display Connecting the speakers (sold separately) ENWW 9
Summary of the content on the page No. 18
3. After installing the speakers, use the cable holders and cable ties (available on select models) to secure the speaker cables. Figure 3-9 Using the cable holders (feature available on select models) Figure 3-10 Using the cable ties (feature available on select models) 10 Chapter 3 Setting up the display ENWW
Summary of the content on the page No. 19
4. After installing the speakers, connect to the SPEAKER input terminal by connecting the proper color match for the left and right speakers. Figure 3-11 Connecting to the input terminal Rotating to the portrait position When installing the display in the portrait position, rotate it clockwise based on its front. The display can be rotated in only one direction. NOTE: The display cannot be rotated if it is installed on the stand. Figure 3-12 Installing portrait NOTE: The LED indicator light or
Summary of the content on the page No. 20
Using the remote control Inserting the batteries 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. NOTE: To prevent environmental pollution, dispose of used batteries in accordance with your local recycling guidelines. Figure 3-13 Inserting batteries 12 Chapter 3 Setting up the display ENWW
