Summary of the content on the page No. 1
Dear Sceptre Customer,
Congratulations on your new SCEPTRE X22 LCD monitor
purchase. Thank you for your support. To ensure safety and
many years of trouble free operation of your LCD monitor,
please read the manual carefully before making any
adjustments, and keep them in a safe place for future
reference. We hope you enjoy your new SCEPTRE X22 LCD
monitor.
For technical assistance, please call 1800-788-2878 and
select option 3 or email our tech support group at
m
Summary of the content on the page No. 2
Important Information Page2 SCEPTRE X22
Summary of the content on the page No. 3
Tips and Safety Precautions THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe p
Summary of the content on the page No. 4
• The X22 LCD MONITOR is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. • Do not overload power strips and extension cords. Overloading can result in fire or electric
Summary of the content on the page No. 5
Table of Contents Important Information………………………………………………………………. 2 Tips and Safety Precautions……………………………………………………… .3 Table of Content……………………………………………………………………..5 Opening the Package……………………………………………………………… 6 Package Contents………………………………………………………………..... 6 Optional Accessories………………………………………………………………. 6 Installing the Base………………………………………………………………….. 7 QUICK START……………………………………………………………………… 8 Mounting Preparations…………………………………………………………….. 9 Identifying Front and Rear Panel……………………
Summary of the content on the page No. 6
Opening the Package The SCEPTRE X22 is packaged in a carton together with standard accessories. The weight of the LCD display is approximately 15.2 lbs. Since the LCD panel can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding. When opening the carton, make sure the product is in good condition and that all the standard accessories and items are included. After unpacki
Summary of the content on the page No. 7
Installing the Base 1. Please place the base on a flat surface (i.e. table). 2. Hold the monitor directly 90 degrees above the base. SCEPTRE X22 Page7
Summary of the content on the page No. 8
3. Connect the monitor to the base by inserting the monitor into the base. QUICK START The following are short steps to connect and use the monitor with your PC under Microsoft Windows. 1. After you have installed the base, connect your VGA cord to both the monitor and PC and turn on the PC and the monitor. 2. While booting up keep pressing F8 and choose the VGA mode option. 3. Under Windows, use your mouse to right click on the background with nothing se
Summary of the content on the page No. 9
Mounting Preparations 1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. 2. Please remove the label sticker that covers the screws you need to remove. SCEPTRE X22 Page9
Summary of the content on the page No. 10
3. Unscrew the 4 screws that lock the arm to the monitor. 4. Once the 4 screws are removed, the stand will come off and the monitor will be ready for mounting. Page10 SCEPTRE X22
Summary of the content on the page No. 11
Identifying Front and Rear Panel Front View POWER INDICATOR : If light is blue, the monitor is turned on. If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer. NATIVE RESOLUTION : This monitor’s clearest picture is produced under its native resolution. The native resolution of the monitor is 1680 x 1050 at 60 Hz refresh rate. SCEPTRE X22 Page11
Summary of the content on the page No. 12
Side View Control Buttons POWER – This button turns the monitor ON or OFF. ADJUST + / SCROLL UP – While in the OSD this button acts as a navigation button moving your selection to the next one. If you entered the function this button acts as the increase adjustment button. With the OSD off, this buttons functions as the hotkey for adjusting BRIGHTNESS. Use the ▲ and ▼ key to adjust the actual value. MENU / ENTER – This button opens the On Screen Display (OSD)
Summary of the content on the page No. 13
Side View Tilt Angle The LCD Monitor’s angle settings range from 0° to 12°. SCEPTRE X22 Page13
Summary of the content on the page No. 14
Rear View Mounting Specification : 100mm x 100mm using screw size M4. Length of screw should not exceed 10mm. Page14 SCEPTRE X22
Summary of the content on the page No. 15
Rear View Connections The following descriptions are from left to right. Audio Line In – This connection is for linking to the PC’s line out connection for transmitting audio signal to the monitor’s speakers. Do NOT connect a headset or external speakers to this connection. You can also use this connection for audio on game consoles or HD video devices by using a 3.5mm Mini-jack to Female RCA (red / white) audio conversion cable in conjunction with a regular RCA (red / wh
Summary of the content on the page No. 16
Understanding Your Cables & Connections Cable Corresponding Name Cable Picture Connection Picture DVI (digital video) VGA (analog video) 3.5 mm Mini-jack Power Cord Conversion Conversion Cable Picture Cable Name HDMI to DVI (optional accessory) 3.5mm Mini-jack to Female RCA Audio (optional accessory) Page16 SCEPTRE X22
Summary of the content on the page No. 17
Connecting the LCD to Your PC If You Have DVI Connection on Your Video Card… 1. Make sure the power of X22 LCD MONITOR is turned off. 2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other end of the cable to your X22 LCD MONITOR. 3. Obtain the Audio In cable and connect the 3.5 mm Mini-jack cable to the Audio In connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your PC’s audio line out connection. 4. Turn on the pow
Summary of the content on the page No. 18
If You Have VGA Connection on Your Video Card… 1. Make sure the power of X22 LCD MONITOR is turned off. 2. If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the X22 LCD MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES option. Click on the SETTINGS tab.
Summary of the content on the page No. 19
Connecting the LCD to Your Video Device If You Have HDMI Connection on Your DVD Player… 1. Make sure the power of X22 LCD MONITOR is turned off. 2. If you have HDMI connection on your DVD player, purchase a HDMI to DVI video conversion cable and connect the HDMI end to the DVD player. Connect the DVI end to the X22 LCD monitor. Make sure to match the shapes on both connections. 3. Purchase a 3.5 mm mini-jack to female RCA audio conversion cable and connect the RCA red / white end
Summary of the content on the page No. 20
If You Have HDMI Connection on Your HD Box… 1. Make sure the power of X22 LCD MONITOR is turned off. 2. If you have HDMI connection on your HD set-top box, purchase a HDMI to DVI video conversion cable and connect the HDMI end to the HD set-top box. Connect the DVI end to the X22 LCD monitor. Make sure you match the shapes on both connections. 3. Purchase a 3.5 mm mini-jack to female RCA audio conversion cable and connect the RCA red / white end to regular RCA red / white cables
