Summary of the content on the page No. 1
ENGLISH FRANÇAIS ESPAÑOL
PN-V601
LCD MONITOR
MONITEUR LCD
MONITOR LCD
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
ENGLISH ..... E1
FRANÇAIS .... F1
ESPAÑOL .... S1
Summary of the content on the page No. 2
IMPORTANT: To aid reporting in case of loss or theft, please record the Model No.: product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifyi
Summary of the content on the page No. 3
ENGLISH PN-V601 LCD MONITOR ENGLISH IMPORTANT INFORMATION T O REDUCE THE RISK OF F IRE OR ELECTRIC SHOCK, DO NOT WARNING: EXPOSE THIS PRODUCT T O RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the CAUTION user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may RISK OF ELECTRIC be of sufficient magnitude to constitute a risk of SHOCK electric shock to persons. DO NOT OPEN The
Summary of the content on the page No. 4
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
Summary of the content on the page No. 5
ENGLISH IMPORTANT INFORMATION (Continued) The battery supplied with this product contains traces of Lead. For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the
Summary of the content on the page No. 6
SAFETY PRECAUTIONS (Continued) 14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on t he product or when objects have fallen into the product. c. When the product has been e xposed to rain or water . d. When the product does not operate properly as described in th e operating instructions. Do not
Summary of the content on the page No. 7
ENGLISH TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with Manual Scope the application of high precision technology. However, there - Microsoft, Windows and Internet Explorer are registered may be minute points on the screen where pixels never light trademarks of Microsoft Corporation. or are permanently lit. Also, if the screen is viewed from - HDMI, the HDMI Logo and High-Definition Multimedia an acute angle there may be uneven colors or b
Summary of the content on the page No. 8
MOUNTING PRECAUTIONS • This product is for use indoors . • T emperature condition may ch ange when using the display • Since the monitor is heavy , consult your dealer before together with the optional equipments recommended by installing, removing or moving the monitor. SHARP. In such cases, please check the temperature • When installin g, removing or moving the monitor , ensure condition specified by the optional equipments. that this is carried out by at least 2 people. • Adhere to
Summary of the content on the page No. 9
ENGLISH Supplied Components If any component should be missing, please contact your dealer. Liquid Crystal Display Monitor: 1 CD-ROM (Utility Disk for Windows): 1 Cable clamp: 2 Operation manual: 1 Power cord Protection cover: 4 * Sharp Corpora tion holds autho rship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. Connecting Pe
Summary of the content on the page No. 10
Connecting Peripheral Equipment 15. AV component input terminals ■ Connection when the PN-ZB02 (optional) • Set BNC of INPUT SELECT on the OPTION menu to A V is attached COMPONENT when using the A V component input terminals. • Select the audio input termina l to be used in A V The PN-ZB02 expansion board (optional) allows the use of COMPONENT of AUDIO SELECT on the OPTION menu. additional connection terminals. 16. AV video input terminal 8. PC/AV DVI-D input terminal • Select
Summary of the content on the page No. 11
ENGLISH Connecting Peripheral Equipment Attach the remote control sensor box to one of the areas listed below. ■ Connection with RS-232 cable * When attached to the left side, because the top and If you connect the monitor in a daisy chain using RS-232 bottom for the remote control sensor box will be reversed cable, using the monitor buttons on the master (main unit), (the connection cable will be on top), the right side is settings are copied to the slave (expansion unit) and operation r
Summary of the content on the page No. 12
Preparing the Remote Control Unit Installing the batteries Remote control operation range 1. Press the cover gently and slide it in the direction of the The operation range of the PN-ZR01 (optional) remote control arrow. unit is approx. 23 feet (7 m) when aimed directly at the remote control sensor box. When used at an angle of approx 10° from the center to the top/bottom/right/left of the remote control sensor , use it within a distance of approx 16.4 feet (5 m). Remote control sensor 2. S
Summary of the content on the page No. 13
ENGLISH Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the supplied cable clamps. Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. : Cable clamp attachment Cable Cable clamp attachment Cable clamp Removing the Handles The handles can be removed. Handle screws The removed handles can be attached on the side. Caution • The removed handles and han dle screws are for use with this monit
Summary of the content on the page No. 14
Turning Power On/Off Caution nOperation mode When the monitor is turned on for the first time after being • T urn on the monitor first before turning on the PC or shipped from the factory, the operation mode setting screen playback device. will be displayed. Set it to MODE1 or MODE2. MODE1 ....Limits the maximum brightness to approx 65% of MODE2. Turning on the main power OFF IF NO OPERA TION is set to ON, and ST ANDBY MODE is set to LOW POWER2. (These settings can not be changed.)
Summary of the content on the page No. 15
FRANÇAIS PN-V601 MONITEUR LCD FRANÇAIS INFORMATION IMPORTANTE POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE AVERTISSEMENT : DÉCHARGE ÉLECTRIQUE, NE PAS EXPOSER CE PRODUIT À LA PLUIE OU À LA POUSSIÈRE. Le symbole représenté par l’éclair à la tête en pointe de flèche à l’intérieur d’un triangle ATTENTION équilatéral, est placé pour alerter l’utilisateur de la RISQUE DE présence d’une “tension dangereuse” non isolée DÉCHARGE à l’intérieur du produit. Cette tension peut avoir une valeur suffisan
Summary of the content on the page No. 16
INFORMATION IMPORTANTE (Suite) AVERTISSEMENT : Les lois FCC établissent que tout changement ou modification non-autorisés de cet équipement qui n’ont pas été expressément approuvés par le producteur, constituent un motif d’annulation des droits de l’utilisateur d’utiliser cet appareil. REMARQUE : Cet équipement, après les tests, a été jugé conforme aux limites d’un équipement numérique de Classe A, conformément à la section 15 de la règlementation FCC. Ces limites sont établies pour fournir un
Summary of the content on the page No. 17
FRANÇAIS INFORMATION IMPORTANTE (Suite) Les piles/accus fournies avec ce produit peuvent contenir des traces de Plomb. Au sein de l’Union Européenne : Le symbole de la poubelle sur roues barrée laisse supposer que les piles/accus usagées ne doivent pas être mélangées avec les déchets ménagers ! Il existe un mode de collecte séparé pour les piles/accus usagées, ce qui permet d’effectuer un traitement et un recyclage en accord avec la législation. Veuillez contacter une autorité locale pour plu
Summary of the content on the page No. 18
PRÉCAUTIONS DE SÉCURITÉ (Suite) 14. Réparation — Dans les cas suivants, débranchez le cordon d’alimentation au niveau de la prise secteur et demandez à un personnel qualifié d’effectuer les réparations. a. Dégât sur le cordon ou la prise de courant. b. Infiltration d’un liquide ou pénétration d’un objet à l’intérieur de l’appareil. c. Exposition de l’appareil à la pluie ou à l’eau. d. Fonctionnement anormal malgré une conformité aux explications du mode d’emploi. Ne réglez que les commandes d
Summary of the content on the page No. 19
FRANÇAIS CONSEILS ET MESURES DE SÉCURITÉ - Le panneau couleur LCD TFT utilisé dans ce moniteur - Ne branchez pas le cordon d’alimentation sur une prise est fabriqué en application d’une technologie de grande multiple. Ajouter une rallonge peut entraîner une surchauffe précision. Cependant, il peut avoir sur l’écran des points et provoquer un début d’incendie. minuscules où les pixels ne s’allument jamais ou restent - Ne débranchez pas ni ne branchez la prise d’alimentation allumés en permanen
Summary of the content on the page No. 20
PRÉCAUTIONS POUR LE MONTAGE • Ce produit est destiné à être utilisé en intérieur. • La température de fonctionnement du moniteur peut • Comme le moniteur est lourd, consultez votre revendeur être différente de celle des accessoires additionnels avant l’installation, le démontage ou le déplacement du recommandés par SHARP. Lorsque c’est le cas, veuillez moniteur. vérifier la température de fonctionnement des accessoires • L’installation, le démontage ou le déplacement du moniteur additionnels
