Summary of the content on the page No. 1
Operation/Reference Guide
Modero® NXD-1000Vi
G4 Touch Panels
10” Modero Widescreen Video Touch Panels
with Full Duplex Intercom
Last Revised: 1/07/2009
Touch Panels
Summary of the content on the page No. 2
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. � Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a pe
Summary of the content on the page No. 3
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are de
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Table of Contents Table of Contents Introduction ........................................................................................................1 NXD-1000Vi Specifications ....................................................................................... 3 NXD-1000Vi Panels - Connector Layout ................................................................... 6 NXA-AVB/ETHERNET Breakout Box ...................................................................7 Product Specifications
Summary of the content on the page No. 6
Table of Contents Testing your Calibration ................................................................................................ 42 Configuring Communication .............................................................................43 Modero Setup and System Settings ....................................................................... 43 Accessing the Setup and Protected Setup Pages.......................................................... 43 Setting the Panel’s Device Number...
Summary of the content on the page No. 7
Table of Contents Setup Page ............................................................................................................. 76 Information ............................................................................................................. 77 Project Information Page .............................................................................................. 78 Panel Information Page........................................................................................
Summary of the content on the page No. 8
Table of Contents Checking the Panel Statistics....................................................................................... 126 Refreshing the Panel Statistics .................................................................................... 126 Clearing the Panel Statistics........................................................................................ 126 Connection Utility Page...............................................................................................
Summary of the content on the page No. 9
Table of Contents SIP Commands...................................................................................................... 193 Appendix A ....................................................................................................199 Text Formatting Codes for Bargraphs/Joysticks................................................... 199 Text Area Input Masking....................................................................................... 200 Input mask character types .....
Summary of the content on the page No. 10
Table of Contents vi 10" Modero Widescreen Touch Panels
Summary of the content on the page No. 11
Introduction Introduction The NXD-1000Vi Modero Widescreen Color Video Touch Panels with duplex intercom (FIG. 1) are the industry’s first widescreen mini-touch panels and are available only through AMX. FIG. 1 Sample 10" Video Touch Panel These Color Video (CV) panels display NTSC/PAL/SECAM video formats within variable sized windows. They include a built-in microphone, speaker, audio/headphone connector, and two NetLinx programmable pushbuttons (available on NXD models only when mounte
Summary of the content on the page No. 12
Introduction NXD-1000Vi panels are field upgradeable to 802.11g communication via the installation of the new NXA-WC8011GCF Wi-Fi Card Kit (FG2255-07). NXD-1000Vi panels support AMX Computer Control, which enables remote viewing and control of any networked computer directly from the panel. This gives the user the ability to launch digital music from a PC, cruise the Internet, check and respond to E-mail, open software files, and launch applications. Anything you can do on your PC can be a
Summary of the content on the page No. 13
Introduction NXD-1000Vi Specifications The following table outlines the specifications for the 10" Widescreen Modero panels. Specifications for 10" Widescreen Video Touch Panels Dimensions (HWD): � NXA-RK10(optional): metal rack-mount with black matte finish: (5 RU - rack units high) 8.72" x 19.0" x 0.50" (22.15 cm x 48.26 cm x 1.27 cm) � NXD-1000Vi (with faceplate): 7.96" x 11.16" x 3.32" (20.22 cm x 28.34 cm x 8.43 cm) � CB-TP10 Conduit/Wallbox (optional): 9.23" x 10.90" x 3.40" (23.44 c
Summary of the content on the page No. 14
Introduction Specifications for 10" Widescreen Video Touch Panels (Cont.) Front Panel Components: Light sensor: � Photosensitive light detector for automatic adjustment of the panel brightness (a dim room results in a dimmer LCD display, and a bright room results in a brighter LCD display). Note: The light sensor can be adjusted via the Sensor Setup page (page 114). Motion sensor (PIR): � Proximity Infrared Detector to wake the panel when the panel is approached. � Activation range: + 45° (lef
Summary of the content on the page No. 15
Introduction Specifications for 10" Widescreen Video Touch Panels (Cont.) Side Panel Components (Cont.): Audio/Video connector: � RJ-45 connector for communication of differential audio/video signals to/from the touch panel (panel type dependant). This connector receives Composite video, Stereo (left/right) audio, and microphone audio. � Video is received via the NXA-AVB/ETHERNET Breakout Box. Configuring video windows for playback is done using TPDesign4. � In-bound audio (from the breakou
Summary of the content on the page No. 16
Introduction It is recommended that firmware KIT files only be transferred over a direct USB or Ethernet connection and only when the panel is connected to a power supply. If battery power or wireless connection fails during a firmware upgrade, the panel flash file system may become corrupted. NXD-1000Vi Panels - Connector Layout FIG. 3 shows the layout of the connectors (located on the rear of the base on the NXT and on the left side panel of the NXD panels). Ethernet (CAT5) Key
Summary of the content on the page No. 17
NXA-AVB/ETHERNET Breakout Box NXA-AVB/ETHERNET Breakout Box The NXA-AVB/ETHERNET Breakout Box (FIG. 4) is included as part of the NXD-1000Vi Kit configuration (panel and box) but can be purchased as a separate accessory. This box facilitates the installation and distribution of video, data, and audio to Modero touch panels located up to 200 feet (60.96 m) from the AVB box. This unit accepts either Composite or S-Video from standard video devices. This breakout box can be mounted on either a
Summary of the content on the page No. 18
NXA-AVB/ETHERNET Breakout Box Product Specifications NXA-AVB/ETHERNET Specifications (FG2254-10) Dimensions (HWD): � 1.50" x 5.55" x 4.88" (3.81 cm x 14.10 cm x 12.40 cm) � Width when attached to mounting ears: 6.65" (16.89 cm) Power Consumption: � 50mA (with audio/video input) � 23mA (with no audio/video) � Routed through NXA-AVB/Ethernet using a 12 VDC-compliant power supply Certifications: � FCC Part 15 Class B, CE, and EN60950 Features: � Accepts either Composite or S-Video (video-capable
Summary of the content on the page No. 19
NXA-AVB/ETHERNET Breakout Box Indirect Line Level out Ethernet In Mic Out Connect (4-pin captive-wire) (to amplifier (RJ-45) or VOL card) 12 VDC power Video In Audio In (BNC) (6-pin captive-wire) supply (rear) NXA-AVB/ETHERNET Breakout Box Power (front) supplied via NXA-AVB box Ethernet Audio/Video 12 VDC power (CAT5) (CAT5) supply or Direct Connect NXD/T Video-capable Touch Panels FIG. 5 Sample wiring configuration on video-capable panels using this breakout box A 12 VDC-compliant power supply
Summary of the content on the page No. 20
NXA-AVB/ETHERNET Breakout Box NXA-AVB/ETHERNET Breakout Box GND F Audio In - Left Channel In (-) R (6-pin captive wire) In (+) O GND N Audio In - Right Channel In (-) T (6-pin captive wire) In (+) GND(-) Microphone Out Out (-) (4-pin captive wire) Out (+) Comp/Y (BNC) C (BNC) Audio/Video (CAT5) Ethernet Ethernet Out (RJ-45) R (CAT5) E A Power to 12 VDC power touch panel R supply FIG. 7 NXA-AVB/ETHERNET Breakout Box connector wiring diagram The rear-panel wiring connections are described below (
