AT&T 906 user manual

Summary of the content on the page No. 1

User’s Manual for the
Speakerphone 906
Fold open this manual for information about
this telephone’s installation and operation.
Please read Part 1 — Important Product
Information, included in this package.
Part 2
© 1998 Philips Consumer Communications, L.P. All rights reserved.
Printed in Mexico. 848236337 Issue 1AT&T

Summary of the content on the page No. 2

I N S TA L L AT I O N NOTE: This telephone requires a Wall 5 Connect the line cord to modular modular telephone jack. wall jack and mount phone onto 1 Remove the base. wall jack. 2 Connect the line cord to Table Make sure the cord snaps firmly telephone. into place. Place the phone on the If you have a wall-mounted telep h o n e, Do not unbundle line cord. Plug wall jack mounting studs and pull remove the telphone from the wall the seven-foot line cord into the down until it is held securely. a

Summary of the content on the page No. 3

TELEPHONE OPERAT I O N Handset Switchhook (under handset) Directory Card/Cover Accesses one-touch memory dialing numbers Programs a number in memory Accesses speed dial memory numbers Temporary Tone Ringer Volume Puts a call on hold Mutes a call Redials last call made Speaker/Handset Access Call Waiting Volume or other services Turns speaker on and makes a call 2

Summary of the content on the page No. 4

TELEPHONE OPERAT I O N c o n t i n u e d Making and Answering a Call—Handset Hold Temporary Tone Dialing Lift the handset to make and receive The Hold feature allows you to keep If you have rotary service, you can calls as you usually would. a call on the line while you step change from pulse to tone dialing away from the phone or while some- during a call by pressing . This Making and Answering a Call— one takes the call on an extension is useful if you need to send tone Speakerphone phone. W

Summary of the content on the page No. 5

M E M O RY Memory Features NOTE: Each time you complete stor- Dialing Long Numbers ing a telephone number by pressing a Numbers will remain stored in There are two ways to dial telephone memory location, listen for two memory unless you erase or change numbers that are too long to fit into a quick beeps to confirm that the num- them by entering other numbers. memory location. ber has been stored in memory. If Capacity: This telephone can store Use Two Memory Locations you hear several beeps, the

Summary of the content on the page No. 6

IN CASE OF DIFFICULT Y If this telephone does not work prop- Telephone Does Not Ring Speakerphone Does Not Work erly, try the following suggestions The speakerphone might not work • Make sure the RINGER switch is before seeking repair assistance. well is someone picks up an exten- set in the LO or HI position. sion phone on the same line. The No Dial Tone • If there are several other tele- speakerphone will come back on if phones on the same line, try • Make sure all plugs are connected the hand