Kenmore 141.158031 user manual

Summary of the content on the page No. 1

Owner's Manual:
Stainless Steel Rotisserie Kit for
Kenmore Elite & Kenmore Premium Grills
141.158031 for 3/4 Burner Kenmore and Kenmore Elite Grills:
141.15804 for 5/6 Burner Kenmore and Kenmore Elite Grills:
CAUTION: It is recommended that you do not exceed 7 pounds when using your rotisserie.
Heavier foods can cause the rotisserie spit to flex excessively causing the rotisserie motor to be
overloaded due to imbalanced operation. Foods heavier than 7 pounds can be cooked by the
indirect method

Summary of the content on the page No. 2

Stainless Steel Rotisserie Assembly Instructions Tools required for assembly: Adjustable wrench or pliers and either a fiat head or Phillips head screwdriver, Pre-Assembly Instructions Before assembling your Rotisserie, use the parts list below to check that all necessary parts have been included. Inspect parts for damage as you proceed. Do not assemble or operate your Rotisserie if it appears damaged. If you are miesinq parts or have questions durinq the assembly process, call 1-888-317-7642, 8

Summary of the content on the page No. 3

Assembling The Motor Bracket Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws, washers and nuts provided. Motor #10-24x3/4" UNC Screws with washers and nuts % Assembling The Rotisserie Slide a Food Skewer onto each end of the Rotisserie Spit. Adjust spacing between Skewers to accommodate your food, then tighten the Thumbscrews to keep the Food Skewers in p

Summary of the content on the page No. 4

For Grill Models 16690/17690 Add the Extra 4" Extension Spit For Grill Models 16680/17680, 16228/17228 Add the Extra 6-1/2" Extension Spit Screw the two Spit sections together using one Lock Washer. Tighten the sections together using two wrenches. Slide a Food Skewer onto each end of the assembled Rotis Spit. Adjust spacing between Skewers to accommodate your food, then tighten the Thumbscrews to keep the Food Skewers in position. Slide the Collar and Bushing onto the threaded end of the Spit.

Summary of the content on the page No. 5

Installing The Rotisserie Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the left side of your grill and the Handle on the right side. Place the Bushing into the slot opening on the right side of your grill bowl, then tighten the Collar Thumbscrew to the left of the Bushing. The Collar will stabilize the Rotisserie during the cooking process and the Bushing allows the Rotisserie Spit to turn smoothly. Plug the Rotisserie into an outlet and turn on to test.