Summary of the content on the page No. 1
1050 Fountain St. N., Cambridge, Ontario, Canada N3H 4R7
Bus. (519) 650-5775 or Fax (519) 650-3773
Toll Free Phone 1-800-361-1517
Toll Free Fax 1-800-327-5609
Model 3800-3820
Model 3805-3825
Installation and Operation Guide
30” and 36” Gas Cooktop
36” cooktop
30” cooktop
Note: Please read these
instructions thoroughly before
attempting to install this unit. Failure
to follow installation instructions
will result in costly service calls.
®
Note: This appliance can only be installed in the st
Summary of the content on the page No. 2
Gas Cooktop Models 3800/3820 Legacy and 3805/3825 Metro CONSUMER WARRANTY FIRST YEAR HEARTLAND warrants the replacement or repair of all parts, including gas components of this Cooktop which prove to be defective in material or workmanship, with the exception of the painted or porcelain enamel finish and plated or stainless steel surfaces, for one year from the date of original purchase. Such parts will be repaired or replaced at the option of Heartla
Summary of the content on the page No. 3
Table of Contents Metro / Legacy Cooktop Section 1: Installation & Assembly ............. 2 Preparing the Installation Site .......................... 2 Installation Clearances .................................... 2 Installation / Clearance Diagrams .............. 3-10 Exhaust Hood ................................................. 11 Electrical Installation ...................................... 11 Gas Line Installation ....................................... 11 Preparing the Cooktop for Install
Summary of the content on the page No. 4
Warning: If the information in this manual is not followed exactly, a fire or explosion may The use of a gas cooking result, causing property damage, personal injury, or death. appliance results in the production of heat and mois- Do not store or use gasoline or other flammable ture in the room in which it is vapours and liquids in the vicinity of this or any installed. Ensure that the other appliance. kitchen is well ventilated. Keep natural ventilation holes What to do if you smell gas open
Summary of the content on the page No. 5
Installation and Assembly These diagrams will outline the required opening Safety Instructions for your cooktop and clearances to cupboards, electrical outlets, and gas outlet locations are also Please check for any damage that may have illustrated. Site preparation can be made to have occurred during shipping. In the unlikely event these utilities ready prior to receipt of the that you find any shipping damage, inform your cooktop. dealer immediately! Caution: To avoid mishaps during the ins
Summary of the content on the page No. 6
Installation Diagram- 30” Legacy Cooktop Model 3800 A C 1 B D 2 D 3 D Air intake slots on underside of control panel must not be obstructed or covered. Dim 30" Legacy Cooktop Figure 1 A 26 5/8" (68cm) B 8 1/4" (21cm) C 29 3/4" (76 cm) Standard profile: 14 1/4"(36 cm) 1 D (as shown in diagram) 2 D low profile: 10 1/8" (26 cm) high back w/ shelf: 3 D 28 1/4" (72cm) Table 1 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in
Summary of the content on the page No. 7
Clearance Diagram- 30” Legacy Cooktop Model 3800 An appropriate exhaust hood with a minimum of 450 CFM is required on all 30" Legacy cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 36” hood, however a 30” hood is adequate. L J G M H 1 2 NN K I O Note: Support deck must be able to support a total weight of 4 burner model: 175 lbs Figure 2 Dim 30" Legacy Cooktop G Maximum 25" (63cm) H Maximum 7 3/4" (21cm) I 30" (77 cm) Minimum 6" (15cm) J l
Summary of the content on the page No. 8
Installation Diagram- 36” Legacy Cooktop Model 3820 C B Air intake slots on underside of control panel must not be obstructed or covered. Dim 36" Legacy Cooktop A 26 5/8" (68cm) Figure 1 B 8 1/4" (21cm) C 36" (91cm) Standard profile: 14 1/4" (36cm) 1 D (as shown in diagram) low profile: 10 1/8" (26 cm) 2 D high back w/ shelf: 3 D 28 1/4" (72cm) Table 1 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J in Table 2 on next page) •
Summary of the content on the page No. 9
Clearance Diagram- 36” Legacy Cooktop Model 3820 An appropriate exhaust hood with a minimum of 900 CFM is required on all 36" Legacy cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 42” hood, however a 36” hood is adequate. L J G M H 1 2 NN K I O Note: Support deck must be able to support a total weight of Grill model : 200 lbs 6 burner model: 220 lbs Dim 36" Legacy Cooktop Figure 2 G Maximum 25" (63cm) H Maximum 7 3/4" (21cm) I 36 1/4" (92
Summary of the content on the page No. 10
Installation Diagram- 30” Metro Cooktop Model 3805 A C 1 D B 2 D 3 D Air intake slots on underside of control panel must not be obstructed or covered. Figure 1 Dim 30" Metro Cooktop A 26 5/8" (68cm) B 8 1/4" (21cm) C 29 3/4" (76 cm) Standard profile:12 3/4"(32 cm) 1 D (as shown in diagram) 2 D low profile: 10 1/8" (26 cm) high back w/ shelf: 3 D 28 1/4" (72cm) Table 1 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in Table 2
Summary of the content on the page No. 11
Clearance Diagram- 30” Metro Cooktop Model 3805 An appropriate exhaust hood with a minimum of 450 CFM is required on all 30"Metro cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 36” hood, however a 30” hood is adequate. L J G M H 1 2 NN K I O Note: Support deck must be able to support a total weight of 4 burner model: 175 lbs Figure 2 Dim 30" Metro Cooktop G Maximum 25" (63cm) H Maximum 7 3/4" (21cm) I 30" (77 cm) Note: If cooktop must stand b
Summary of the content on the page No. 12
Installation Diagram- 36” Metro CooktopModel 3825 C B Air intake slots on underside of control panel must not be obstructed or covered. Dim 36" Metro Cooktop A 26 5/8" (68cm) B 8 1/4" (21cm) Figure 1 C 36" (91cm) Standard profile:12 3/4" (32 cm) 1 D (as shown in diagram) 2 D low profile: 10 1/8" (26 cm) high back w/ shelf: 3 D 28 1/4" (72cm) Table 1 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in Table 2 on next page) • 0” Clear
Summary of the content on the page No. 13
Clearance Diagram- 36” Metro Cooktop Model 3825 An appropriate exhaust hood with a minimum of 900 CFM is required on all 36" Metro cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 42” hood, however a 36” hood is adequate. L J G M H 1 2 NN K I O Note: Support deck must be able to support a total weight of Grill model : 200 lbs 6 burner model: 220 lbs Figure 2 Dim 36" Metro Cooktop G Maximum 25" (63cm) H Maximum 7 3/4" (21cm) I 36 1/4" (92cm) Min
Summary of the content on the page No. 14
Models 3800/3820 and 3805/3825 gas Exhaust Hood cooktops must be electrically grounded in compliance with local codes. In the absence of An exhaust hood must be installed over your local codes, the installation must conform with new appliance. (see fig. 2) Exhaust hoods to the National Electrical Code. match the Legacy and Metro cooktops are available from your dealer. Our hoods are Disconnect the electrical supply and turn off the designed and built to complement your range’s gas supply bef
Summary of the content on the page No. 15
Preparing the Cooktop for 8. Assemble the backguard. (See fig. 4) Installation Locate the backguard at the back of the cooktop. Remove screws and backguard. Do not throw these screws away. They 1. Carefully remove banding with metal are required to reinstall the backguard. shears. Caution: banding may be under Line up holes in the backguard with the pressure, wear gloves to protect hands holes in the back of the cooktop. from accidental cuts. Cooktop 2. Remove cardboard lid. Backguard Ass
Summary of the content on the page No. 16
Cooking Controls The cooking controls are located on the front of the cooktop. These controls offer an infinite number of heat settings for ease and accuracy in cooking. They have a range from 15,500 BTU (setting #5) to as low as 450 BTU (setting #1) Refer to page 14 (fig.6) or page 17 (fig.7) for details. Cooktop Features A. Burners feature 15,500 BTU (4.4kW) C. Grill models feature two 7,500 BTU twin easy clean, sealed style, dual head burners – for a total of 15,000 BTU. burners. The oute
Summary of the content on the page No. 17
Control Panel Graphic (fig 6) These illustrations show the control panel layout of each model. The Legacy is shown, however, the Metro has a similar layout. 4 burner - top illustration 6 burner - middle illustration 4 burner & grill - bottom illustration 14
Summary of the content on the page No. 18
Burner and Grill Operation Lighting the Top Burners and Small Pot Ring / Trivet Grill Pot ring support is used when cooking on top burners while using a small pot. The trivet fits Cooktop is equipped with a spark ignition on any burner. Each channel fits on one of 4 system that is electrically operated. Pushing fingers on the burner grate. (see fig 8 ) in and turning the knob to any position will light the burner. When the knob is turned, a distinct clicking noise will be heard. After the b
Summary of the content on the page No. 19
Grilling Guide (For 36” units with grill feature) Generally we recommend preheating the grill 10 minutes on high. This provides a more even heating of the grill. Then follow the guide below. When grilling roasts and thick meats sear on high then reduce heat to allow food to cook through- out and not burn. Turn meats once after juices appear on the surface. Flare-ups will naturally occur when fat falls on the flame so do not leave unattended. Until flaming subsides reduce heat and use a long
Summary of the content on the page No. 20
Care and Cleaning Porcelain – Legacy Series Stainless Steel – Metro Series Keeping it clean DO NOT USE A STEEL WOOL PAD. It will scratch the surface. Care should be taken The porcelain is very serviceable and simple to clean, but because it is glass, it will not when cleaning any stainless steel surface. Start with a soapy water solution and damp withstand rough handling or abuse. Never place a cold wet cloth on a hot porcelain cloth, rinse, then dry. Increase the strength of surface. Porcela
