ActionTec V1000H user manual

User manual for the device ActionTec V1000H

Device: ActionTec V1000H
Category: Uncategorized
Manufacturer: ActionTec
Size: 2.41 MB
Added : 7/25/2023
Number of pages: 2
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for ActionTec V1000H. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with ActionTec V1000H.

For your convenience

If looking through the ActionTec V1000H user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual ActionTec V1000H on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual ActionTec V1000H to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
ActionTec V1000H Guide - Online PDF
Advertisement
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual ActionTec V1000H but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to ActionTec V1000H. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

ActionTec V1000H - Support and Troubleshooting

How do I reset my Actiontec V1000H?

To reset the Actiontec V1000H router, you can follow these steps:
1. Locate the Reset button: On the back panel of the router, look for a small hole labeled "Reset" or a button with a circular arrow symbol. The location may vary slightly depending on the specific model of the V1000H.
2. Press and hold the Reset button: Using a paperclip or a small, pointed object, press and hold the Reset button for about 10 seconds. Keep the button pressed until the router starts to reboot.
3. Release the Reset button: After holding the Reset button for the designated time, release it.
4. Wait for the router to reset: Allow a few minutes for the Actiontec V1000H router to complete the resetting process and reboot. During this time, the router's lights will flash and eventually stabilize.
5. Connect and reconfigure: Once the router has finished rebooting, you will need to reconnect your devices and reconfigure any custom settings you had previously configured. You may need to consult the user manual or contact your internet service provider for assistance with reconfiguration.
Please note that performing a reset will erase any custom configurations and

What speed is Actiontec V1000H?

The Actiontec V1000H is a DSL modem that supports Internet speeds of up to 25 Mbps. However, the actual speed you will experience may vary depending on your DSL service provider and the quality of your DSL connection.

What is the WPS button on the Actiontec router?

The WPS (Wi-Fi Protected Setup) button on the Actiontec V1000H router is used to establish a secure wireless connection between the router and a device, such as a smartphone or computer, without entering the Wi-Fi password. By pressing the WPS button on the router and then activating the WPS function on the device, they will automatically connect to each other securely. This simplifies the process of connecting devices to the Wi-Fi network.

How do I access my Actiontec router settings?

1. Connect the device you'll use to configure the router to one of your Actiontec router's Ethernet ports.
2. Launch a web browser on the connected device and type "192.168.1.1" into the address bar, then press "Enter."
3. You'll be prompted to enter a username and password. If you haven't changed it before, the default username should be “admin” and the default password should be “password” or "admin". If you've changed your login credentials and you can't remember them, you'll need to reset the router to factory settings.
4. Click on "OK" to log into your Actiontec router menu interface.
5. Once you've logged in, you can change settings as necessary, such as wireless security, firewall settings, and more.
6. Make sure to save any changes before closing your browser.
Note: This step-wise instruction could differ as per the model version. Please refer to the respective user manual of the product for precise instructions.
Alternative user manuals
# User manual Category Download
1 ActionTec F2250 Frontier Owner's manual Uncategorized 0
2 ActionTec V1000H Manual Uncategorized 0
3 BUSH 16GB MP3 Player Instruction manual Uncategorized 0
4 Sony HDR-AS15 Owner's manual Uncategorized 0
5 Electrolux EKK54506OW User manual Uncategorized 0
6 Panasonic SLJ910 Operating instructions Uncategorized 0
7 Sony NWZ WS613 Owner's manual Uncategorized 0
8 Extech Instruments HD750 User's manual Uncategorized 0
9 Woodstock SHOP FOX M1001 User manual Uncategorized 0
10 Troy-Bilt TB35 EC Instructions Uncategorized 0
11 Whirlpool KD61088A/A02 Product information Uncategorized 0
12 Samsung UE55JU6640U User manual Uncategorized 0
13 JVC UX-F327S Owner's manual Uncategorized 0
14 Maytag UXT5230AD User manual Uncategorized 0
15 Roland VT-3 Owner's manual Uncategorized 0