AEG IKE85431FB user manual

There could be several reasons why your induction hob is not working. Here are some common troubleshooting steps you can try:
1. Check the power supply: Ensure that the hob is properly plugged into a working power outlet. Additionally, check if the circuit breaker has not tripped, and if it has, reset it.
2. Check the cookware: Induction hobs require specific types of cookware that are compatible with induction heating. Make sure you are using pots and pans with a flat, magnetic bottom. Non-magnetic or irregular-shaped cookware will not work on an induction hob.
3. Control settings: Check if the hob's control settings are correctly adjusted. Ensure that the hob is properly turned on, and if it has different heat zones, check if the zone you're using is selected and set to the desired heat level.
4. Safety features and lock settings: Certain induction hobs have safety features such as a child lock or auto shut-off that prevent accidental activation. Check if any of these features are enabled and disable them if necessary.
5. Faulty components: If none of the above steps work, there may be a possibility of a faulty component within the hob. In that case, it is recommended to consult the manufacturer's manual or contact their customer support for further assistance or to arrange for a repair or replacement if needed.

When a flashing U is displayed on an induction hob, it usually indicates an error or issue with the hob. The specific meaning may vary depending on the manufacturer and model of the hob. However, in general, a flashing U could signify the following:
1. Pan Recognition Issue: It may indicate that the hob is unable to detect the presence of a compatible pan or that the pan being used is not suitable for induction cooking. Make sure to use cookware with a ferrous metal base to ensure proper functioning.
2. Overheating Protection: Some induction hobs have an overheating protection feature. If the hob detects excessive heat or an issue with the temperature sensors, it may display a flashing U to indicate an overheating problem.
The best way to determine the exact meaning of the flashing U is to refer to the instruction manual provided by the manufacturer. It will contain specific information about error codes and troubleshooting steps for your particular induction hob model.

There could be several reasons why your AEG hob is not working. Here are a few common issues to check:
1. Power supply: Ensure that the hob is properly connected to a power source and that the power supply is functioning properly. Check if the circuit breaker or fuse associated with the hob is tripped or blown. Reset or replace them if necessary.
2. Burner controls: Make sure the burner controls are in the correct position and are set to the desired heat level. Some hobs require you to press and hold the controls for a few seconds to activate them.
3. Child lock: If your hob has a child lock feature, check if it is accidentally activated. Refer to the user manual to learn how to deactivate it.
4. Safety features: Some hobs have safety features like a residual heat indicator, which displays a warning if the surface is still hot. If this indicator is on, wait for the hob to cool down before trying to use it again.
5. Gas supply: If you have a gas hob, ensure that the gas supply is turned on and functioning correctly. Check if other gas appliances in your home are working to determine if the issue is with the hob or the gas supply.
If none of these troubleshooting steps resolve the issue, it is recommended to contact AEG customer support or consult a qualified technician for further assistance.