AEG MICROMAT-COMBI-30C user manual

There can be several potential reasons why your AEG oven is not heating up. Here are some common troubleshooting steps you can try:
1. Check the power supply: Ensure that the oven is properly plugged in and that the circuit breaker or fuse controlling the appliance is not tripped or blown.
2. Verify the oven settings: Make sure you have set the oven to the correct temperature and cooking mode. Some ovens have different functions, so double-check the selected mode.
3. Inspect the oven elements: Examine the heating elements (both the bake and broil elements) to see if they are visibly damaged, corroded, or broken. If any element is defective, it will need to be replaced.
4. Test the oven thermostat: Use an oven thermometer to check if the thermostat is accurately reading the oven temperature. If there is a discrepancy, the thermostat may need to be recalibrated or replaced.
5. Check the oven door seal: A faulty door seal can prevent the oven from reaching the desired temperature. Look for any gaps, cracks, or damage in the seal and replace it if necessary.
6. Clean the oven: Built-up grease, food debris, or residue can interfere with the oven's heating performance. Clean the oven thoroughly, including the heating elements, to ensure optimal heat distribution.
7. Consult the user manual: If the above steps do not resolve the issue, consult the AEG oven's user manual for specific troubleshooting tips or contact AEG's customer service for assistance.
If attempting these troubleshooting steps does not resolve the issue, it may be necessary to contact a professional oven repair technician for further diagnosis and repair.

Setting the clock on an AEG oven may differ by the oven model. Here's a general way on how to set some AEG oven:
1. Step 1: Press the "-" and "+" buttons at the same time for a few seconds until the display starts blinking.
2. Step 2: Use the "+" or "-" buttons to set the current time. Forward count goes by pressing the "+", and reverse count goes with "-".
3. Step 3: After you've set the correct time, wait a few moments. The flashing on the display should stop, sealing your settings.
Note: Usually, when the power supply has been interrupted, the clock flashes to alert you to set the time.
Please refer to your user manual for more specific instructions on how to reset your specific AEG oven clock. If you're having trouble, don't hesitate to contact AEG's customer service.

To reset your AEG oven after a power cut, you can follow the steps below:
1. Make sure the oven is completely switched off and disconnected from the power supply.
2. Locate the circuit breaker or fuse box in your home and find the switch or fuse corresponding to the oven's power supply. Turn off the switch or remove the fuse.
3. Wait for a few minutes to ensure that all residual power is discharged from the oven.
4. After a few minutes, flip the circuit breaker switch back on or replace the fuse.
5. Reconnect the oven to the power supply and switch it on.
6. Check if the oven is functioning properly by setting the time, temperature, and running a test cycle.
If your oven still doesn't function correctly after following these steps, consult the instruction manual or contact AEG's customer support for further assistance.