Beko BDIN38640F user manual

Here are the general steps for using your Beko dishwasher for the first time:
1. Installation: Ensure your dishwasher is properly installed. This should be done by a professional to guarantee all water connections, electrical connections and placements are correct.
2. Power On: Connect your dishwasher to a power source and turn it on.
3. Detergent Dispenser: Fill the detergent dispenser with the appropriate amount of dishwasher detergent. If your Beko machine has an additional compartment for rinse aid, fill it as well.
4. Load Dishes: Load your dishes into the dishwasher, making sure they’re properly placed and not blocking the spray arms. Load heavily soiled items in the lower basket and more delicate items in the upper basket.
5. Select a Program: Your Beko dishwasher will have a number of programs to choose from. These might range from "Eco" for energy saving, "Intensive" for heavily soiled dishes, to "Quick & Shine" for a faster wash. Consult your user manual for more information about the programs your specific model offers.
6. Start the Dishwasher: Close the dishwasher door and press the start button. The machine will begin working. The remaining time might be shown on a display.
7. Unloading: When the cycle is finished, wait a few minutes before opening the door to allow steam to dissipate. Unload the lower basket first to prevent water from upper basket falling onto the dishes below.
8. Safety Measures: Keep children away from detergent and the dishwasher when it's running, as the door can become hot.
Remember, always consult your user's manual for specific instructions related to your specific model of Beko dishwasher before using it for the first time.

There could be several reasons why your Beko dishwasher is not starting:
1. Power Issue: First, check to see if the dishwasher is plugged in and receiving power. If the outlet is working, check for a tripped breaker or blown fuse in your home's electrical panel.
2. Door Latch: The dishwasher will not start if the door is not properly latched. Check the latch for any obstructions or damage.
3. Control Panel: If the control panel is not responding, it may be faulty or have a loose connection.
4. Start Relay: The start relay is a device that powers the dishwasher motor. If this part is defective, the dishwasher will not start.
5. Timer: If the timer is not advancing or is defective, this could prevent the dishwasher from starting.
6. Thermal Fuse: The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse has blown, the dishwasher will not start.
Consider contacting a professional if you can't diagnose or fix the problem yourself.

There are several possible reasons why your Beko dishwasher keeps asking for salt:
1. Insufficient salt level: The dishwasher uses salt to soften the water and prevent limescale buildup. If the salt level is low or empty, the dishwasher may prompt you to add more salt.
2. Incorrect salt type or quality: It is important to use the correct type of dishwasher salt recommended by the manufacturer. If you are using a different type of salt or low-quality salt, it may not dissolve properly, causing the dishwasher to keep asking for more.
3. Salt dispenser blockage: The salt dispenser or its cap may be blocked or clogged, preventing the salt from being dispensed properly. This can lead to insufficient salt levels and trigger the dishwasher to ask for more salt.
4. Faulty or malfunctioning salt sensor: The dishwasher has a sensor that determines the salt level in the machine. If this sensor is faulty or malfunctioning, it may give inaccurate readings and prompt for more salt even when there is enough present.
5. Water hardness level: If your water supply is particularly hard, it may require more salt to soften the water, leading the dishwasher to ask for additional salt more frequently.
To address this issue, you can try the following steps:
1. Check and refill the dishwasher salt reservoir with the correct type of salt recommended by the manufacturer.
2. Make sure the salt dispenser and its cap are not blocked and are functioning properly.
3. Clean the salt chamber to remove any potential blockages.
4. If the problem persists, it is recommended to consult the appliance manual or contact Beko customer support for further assistance or to arrange a technician visit if necessary.