Bella 12-CUP-PROGRAMMABLE-COFFEE-MAKER user manual

To clean a Bella 12-cup programmable coffee maker with vinegar, you can follow these steps:
1. First, make sure the coffee maker is unplugged and cooled down.
2. Remove any remaining coffee grounds or used filter from the machine.
3. Mix equal parts of white vinegar and water. The amount will depend on the size of your coffee maker, but a 1:1 ratio is usually sufficient for cleaning.
4. Fill the coffee maker's water reservoir with the vinegar-water mixture. If your coffee maker has a water filter, remove it before pouring in the mixture.
5. Place a clean, empty carafe on the coffee maker's heating plate (make sure there is no coffee or residue in it).
6. Turn on the coffee maker and start a brew cycle. Let the vinegar-water mixture run through the coffee maker as if you were making a pot of coffee. This will clean the internal components and remove any scale or buildup.
7. Once the brew cycle is complete, turn off the coffee maker and let it sit for about 15 minutes to allow the mixture to fully clean the machine.
8. Discard the vinegar-water mixture from the carafe and rinse it thoroughly.
9. Fill the coffee maker's water reservoir with clean, fresh water.
10. Place the rinsed carafe back on the heating plate.
11. Start another brew cycle with just water (no vinegar) to flush out any remaining vinegar residue and odor.
12. Repeat the water-only brew cycle one more time to ensure all the vinegar is completely rinsed out.
After following these steps, your Bella coffee maker should be clean and ready to use again.

To clean your Bella Proseries coffee maker, you can follow these steps:
1. Turn off and unplug the coffee maker: Ensure that the coffee maker is not connected to any power source before starting the cleaning process.
2. Remove the filter and coffee grounds: Discard any remaining coffee grounds and remove the coffee filter. Rinse the filter basket and the carafe thoroughly with warm water.
3. Cleaning the carafe and lid: Wash the carafe and lid using warm, soapy water. Rinse them thoroughly to remove any soap residue.
4. Clean the water reservoir: Remove the water reservoir from the coffee maker, empty any remaining water, and wash it with warm, soapy water. Rinse it thoroughly to remove any soap residue.
5. Descaling the coffee maker: Regular descaling helps remove mineral deposits and improve the performance of the coffee maker. To descale your Bella Proseries coffee maker, mix white vinegar and water in a 1:1 ratio and pour it into the water reservoir. Run a brew cycle without coffee grounds. Repeat this process two to three times, followed by running two cycles of fresh water to rinse the machine thoroughly.
6. Wipe the exterior: Use a damp cloth or sponge to wipe the exterior surfaces of the coffee maker. Ensure that no moisture enters the electrical components.
7. Reassemble and run a test cycle: Once all the parts are cleaned and dried, reassemble the coffee maker. Fill the water reservoir with fresh water, place the cleaned filter and coffee grounds in the basket, and start a brew cycle without coffee grounds to ensure everything is working properly.
By following these steps, you can effectively clean your Bella Proseries coffee maker and maintain its performance for a long time.