Bissell SPOTCLEAN-LITTLE-GREEN-2513G user manual

There could be several reasons why your Bissell Little Green may not be working. Here are a few possibilities to consider:
1. Power supply: Ensure that the machine is properly plugged into a functioning power outlet. Check the power cord for any cuts or damage that could be interrupting the power flow.
2. Water tank: Make sure the clean water tank is filled with water and seated securely in the machine. If it is not properly locked into place, the machine may not function.
3. Dirty water tank: Ensure that the dirty water tank is empty and seated correctly. If the tank is full, the machine may not be able to extract water from the surface.
4. Clogged nozzles or hoses: Check the nozzles and hoses for any clogs or blockages. Clean or unclog them as necessary to ensure proper suction and water flow.
5. Spray nozzle setting: Verify that the spray nozzle setting is adjusted correctly for the desired cleaning mode (spray or suction). If it is incorrectly set, the machine may not dispense water or pick up dirt.
6. Maintenance: Regularly clean and maintain the machine according to the manufacturer's instructions. Build-up of debris, hair, or other obstructions can hinder its performance.
7. Motor or pump issue: If none of the above solutions resolve the problem, there may be an issue with the motor or pump. In this case, it is best to contact Bissell customer support or take the machine to an authorized service center for further assistance.
Remember to always refer to the user manual for specific troubleshooting tips and instructions related to your Bissell Little Green model.

If you're experiencing issues with the suction on your Bissell SpotClean Little Green 2513G, here are a few steps you can try to fix it:
1. Check the dirty water tank: Ensure that the tank is properly attached and that it sits securely in its place. Make sure there are no leaks or blockages in the tank itself.
2. Clean the nozzles and brush: Remove the nozzle and the brush from the machine. Inspect them for any clogs or debris. Rinse them with warm water and gently clean them using a brush or cloth. Ensure there is no blockage hindering the suction.
3. Examine the hose and attachments: Check the hose and attachments for any clogs or obstructions. Gently clean them by running water or using a small brush to remove any debris.
4. Clear the internal tubing: On the back of the machine, locate the clear nozzle/spray tip holder. Remove it and clean out any debris that may be blocking the tubing.
5. Check the filters: Make sure the filters are clean and free from debris. Rinse them under warm water or replace if necessary. Allow them to dry completely before reattaching them to the machine.
6. Ensure proper water level: Fill the clean water tank with the recommended amount of water. Ensure it is securely attached to the machine.
7. Test without attachments: Detach the hose and any other attachments. Turn on the machine and check if it has suction power without any attachments connected. If it works fine, then the issue may be with the attachments themselves.
If none of these steps resolve the suction issue, it is recommended to contact Bissell customer support or refer to the product's user manual for further troubleshooting or repair options.

No, you do not have to use Bissell solution in the Bissell SpotClean Little Green Machine. While Bissell does offer a range of cleaning solutions that are specially formulated for their machines, you can also use other carpet cleaning solutions that are suitable for spot cleaning. Just make sure to follow the instructions provided by the manufacturer of the cleaning solution you choose to use.