Canon IMAGECLASS-MF232W user manual

To reset the Canon Imageclass MF232w printer, you can follow these steps:
1. Ensure that the printer is turned on.
. Press and hold the "Stop" button until the Alarm lamp flashes seven times.
3. Release the "Stop" button. The printer will enter the standby mode and the Alarm lamp will turn off.
4. Press and hold the "Stop" button again until the Alarm lamp flashes six times.
5. Release the "Stop" button. The printer will start the initialization process, and then return to the standby mode.
Please note that resetting the printer will restore the printer settings to their default values.

To change the Wi-Fi settings on your Canon imageCLASS MF232w, follow these steps:
1. Make sure your printer is turned on.
. Press the Menu button on the printer's control panel.
3. Use the arrow buttons to navigate through the menu and select the "Device settings" option. Press OK.
4. Scroll down to select the "LAN settings" option and press OK.
5. Select the "Wireless LAN settings" option and press OK.
From here, you have two options:
Option 1: Set up Wi-Fi using WPS (Wi-Fi Protected Setup):
6a. If your Wi-Fi router supports WPS, select the "WPS via Push Button" or "WPS via PIN Code" option, depending on your router's configuration.
7a. Follow the instructions on the printer's screen to complete the WPS setup. This typically involves pressing the WPS button on your router or entering a PIN code provided by the printer.
8a. Once the connection is established, your printer will display "Connected to the wireless LAN" message.
Option 2: Set up Wi-Fi manually:
6b. Select the "Manual Setting" option.
7b. Use the arrow buttons to select your Wi-Fi network from the list of available networks.
8b. Enter your Wi-Fi network's password using the numeric keys or the alphanumeric keypad on the printer's control panel.
9b. Press OK to confirm the password.
After completing either option, your Canon MF232w will be connected to your new Wi-Fi network.

To connect your Canon imageclass MF232w printer to your computer, you can follow the steps below:
1. Ensure that both your computer and the printer are turned on and connected to the same network.
2. On your computer, open the Control Panel (Windows) or System Preferences (Mac).
3. In the Control Panel (Windows), click on "Hardware and Sound" and then select "Devices and Printers." In System Preferences (Mac), click on "Printers & Scanners" or "Print & Fax."
4. Click on "Add a printer" or the "+" button in the printers list.
5. On the next screen, select "The printer that I want isn't listed" or any similar option.
6. Choose the option to add a printer using a TCP/IP address or hostname.
7. Enter the IP address or hostname of your Canon MF232w printer. You can find this information on the printer's display by navigating to Network Settings or by printing a network configuration page.
8. Your computer will attempt to connect to the printer using the provided information. Once the connection is established, select the appropriate printer driver for your operating system. If you don't have the driver installed, you can download it from Canon's official website.
9. Follow the on-screen instructions to complete the installation process.
After completing these steps, your Canon MF232w printer should be successfully connected to your computer. You can now use it to print documents and perform other functions.

Yes, the Canon imageCLASS MF232w is a wireless multifunction laser printer. It is capable of connecting to a wireless network for printing, scanning, and faxing purposes.