Cardo SCALA-RIDER-Q3 user manual

The Cardo scala rider Q3 has a range of up to 1,600 meters or 1 mile in optimal conditions.

To pair your Scala Rider Q3 Bluetooth with a compatible device, follow these steps:
1. Turn on your Scala Rider Q3 by pressing the power button located on the side of the device.
. Enable Bluetooth on the device you want to pair with (e.g., your smartphone).
3. Press and hold the 'Mobile' button on the Scala Rider Q3 until you hear a voice prompt saying "Phone pairing."
4. On your smartphone, navigate to the Bluetooth settings menu and search for available devices.
5. Select the Scala Rider Q3 from the list of available devices. It may appear as "Cardo Q3" or a similar name.
6. Follow any on-screen prompts on your smartphone to complete the pairing process.
7. Once pairing is successful, you will hear a voice prompt saying "Phone connected."
Note: If you want to pair your Scala Rider Q3 with an additional device (e.g., a GPS device), you can follow the same steps after the initial pairing with your phone. Simply press and hold the 'GPS' button on the Scala Rider Q3 instead of the 'Mobile' button.
Make sure to consult the specific instructions provided with your Scala Rider Q3 for any additional guidance or troubleshooting steps.