D-Link DCS-8525LH user manual

To connect your D-Link DCS-8525LH camera to a new network, follow these steps:
1. First, make sure your camera is powered on and connected to a power source.
2. Download and install the mydlink app on your smartphone or tablet. It is available for both iOS and Android devices.
3. Open the mydlink app and log in to your mydlink account. If you don't already have an account, you can create one within the app.
4. Tap the "+" symbol at the top right corner of the app to add a new device.
5. Select "Scan QR code" and use your smartphone's camera to scan the QR code located on the back of the camera.
6. The app will automatically detect your camera and prompt you to set it up. Follow the on-screen instructions to proceed.
7. Before proceeding, ensure that your smartphone or tablet is connected to the Wi-Fi network you want to connect the camera to.
8. The app will ask you to enter your Wi-Fi network credentials (network name and password). Provide the required information.
9. The app will then configure the camera to connect to the new Wi-Fi network. Please wait until the process is completed. Your camera's LED indicators will give you feedback during this process.
10. Once the setup is complete, the camera is ready to use on the new network. You can access and control it through the mydlink app.
Remember to place your camera within the range of your Wi-Fi network for a stable connection.

To access your D-Link DCS-8525LH camera directly, you can follow these steps:
1. Connect the camera to your local network using an Ethernet cable or via Wi-Fi. Ensure that the camera is powered on and connected properly.
2. Once connected, open a web browser on a computer or mobile device that is connected to the same network.
3. In the address bar of the browser, enter the IP address of the camera. The default IP address for D-Link cameras is often "192.168.0.20" or "192.168.0.30". You can check the camera manual or D-Link's website for the correct default IP address specific to your camera model.
4. Press Enter to access the camera's login page.
5. The login page will prompt you for a username and password. By default, the username is often "admin" and the password is either left blank or "admin". You can also check the camera manual or D-Link's website for specific default login credentials.
6. Enter the username and password, then click on the Login or Sign In button.
7. After successful authentication, you should be able to access the camera's live view and settings directly through the web browser interface.
Note: It is recommended to change the default username and password for security purposes after the initial login.
If you have trouble accessing the camera directly, make sure your computer/mobile device and the camera are connected to the same network, double-check the IP address, and ensure that any firewall or security software is not blocking the connection.

To reset the D-Link DCS-8525LH camera, you can follow these steps:
1. Locate the Reset button on the back or bottom of the camera.
. Using a paperclip or a similar object, press and hold the Reset button for about 10 seconds.
3. Release the button once the camera's LED starts blinking rapidly.
4. The camera will go through a reset process, and after a few minutes, it should be restored to the factory default settings.
It's important to note that resetting the camera will erase any customized settings, such as Wi-Fi network information and login credentials.

There could be several reasons why your D-Link camera is not connecting to Wi-Fi. Here are a few troubleshooting steps you can try:
1. Ensure your Wi-Fi network is functioning properly. Check if other devices are able to connect to the Wi-Fi network without any issues.
2. Make sure you are entering the correct Wi-Fi password during the camera setup process. Double-check the password and try again.
3. Check the distance between the camera and the Wi-Fi router. If the camera is placed too far away, it may have trouble establishing a stable connection. Try moving the camera closer to the router and see if it connects.
4. Ensure that the camera is within the range of your Wi-Fi network. If the camera is too far away from the router, it might not be able to connect reliably. You can try installing a Wi-Fi extender or repeater to enhance the signal strength in the camera's location.
5. Restart both your Wi-Fi router and the camera. Sometimes, a simple power cycle can resolve connectivity issues.
6. Check if your Wi-Fi router is using MAC address filtering. If so, ensure that the camera's MAC address is added to the allowed devices list. You can find the MAC address of your camera in its settings or on the device itself.
7. Make sure the camera's firmware is up to date. Visit the D-Link support website and download the latest firmware for your camera model. Follow the instructions provided to update its firmware.
8. Resetting the camera to its default settings can also help. Look for a small reset button on the camera and press it using a paperclip or a similar object for about 10 seconds. Afterward, reconfigure the camera's settings and try connecting to Wi-Fi again.
If none of these steps resolve the issue, you may want to contact D-Link support for further assistance or consider getting professional help.