Denon AVR-S650H user manual

Here are steps to set up your Denon AVR-S650H:
1. **Unbox the Equipment**: Carefully remove the Denon AVR-S650H from its box. You will also find a remote control, an FM indoor antenna, a setup microphone, a quick start guide, and AAA batteries for the remote control within the box.
2. **Place the Receiver**: Place the receiver at a convenient location that is near your TV and other devices you want to connect. Make sure this place is well ventilated to prevent overheating.
3. **Connect the Speakers**: Using quality speaker wires, connect your speakers to the receiver. The AVR-S650H can support a 5.2 system. Make sure you connect each speaker to the correct terminal, they are labeled ‘Front Left, Front Right, Center, Surround Left, and Surround Right’.
4. **Connect the TV**: Use an HDMI cable to connect your TV to the receiver. Connect one end of the HDMI cable to the HDMI OUT terminal labeled 'ARC' on the back of the receiver, and the other end to an HDMI IN terminal on your TV.
5. **Connect Other Devices**: Connect any other devices to the receiver like a Blu-ray player, game console, etc. using appropriate cables (usually HDMI). Most of these will go to the HDMI IN ports on the back of the receiver.
6. **Connect the Antennas**: Attach the FM antenna to receive radio broadcasts.
7. **Power On the System**: Connect the receiver into an AC outlet and press the power button. You should see the initial setup wizard on the connected TV screen.
8. **Initial Setup**: Follow the setup wizard on your TV. It will guide you to set up essential settings such as speaker layout, network connection, and other preferences.
9. **Connect to the Internet**: Establish a connection either by Ethernet cable to your router or through Wi-Fi, whichever is most convenient for you.
10. **Running Room Calibration**: The receiver comes with a setup microphone to get the best audio from your speaker setup in its specific room location. Place the microphone at your usual listening spot at ear level and start the room calibration as directed by the setup wizard.
Now your Denon AVR-S650H is correctly set up and ready for use.
Remember to refer to the user manual inclusively for more detailed instructions and to get the most out of your Denon AVR-S650H.

To connect your phone to the Denon AVR-S650H, you have a few options:
1. Bluetooth: The Denon AVR-S650H supports Bluetooth connectivity, allowing you to wirelessly connect your phone. Here's how to do it:
- Enable Bluetooth on your phone.
- On the Denon receiver, press the "Bluetooth" button on the remote control to enter pairing mode.
- On your phone, look for the Denon AVR-S650H in the available Bluetooth devices list and select it to pair.
2. Wi-Fi: The Denon AVR-S650H also supports Wi-Fi connectivity, allowing you to stream audio directly from your phone. Here's how to do it:
- Connect your Denon receiver to your Wi-Fi network by following the instructions in the user manual or on-screen setup wizard.
- On your phone, install the HEOS app from the App Store or Google Play Store.
- Open the HEOS app and follow the on-screen instructions to add your Denon AVR-S650H to your HEOS account.
- Once added, you can stream music from your phone to the receiver using the HEOS app.
3. Wired Connection: You can also connect your phone to the Denon AVR-S650H using a wired connection. This method typically provides the best audio quality.
- Check the supported connection options on your phone, such as HDMI, USB, or analog audio.
- For HDMI, use a compatible HDMI cable to connect your phone to the HDMI input on the Denon receiver.
- For USB, connect your phone to the USB port on the receiver using a USB cable. Make sure your phone's USB connection settings are set to allow audio output.
- For analog audio, use the headphone output or audio output of your phone, and connect it to the corresponding audio input on the Denon receiver using an appropriate cable (e.g., RCA or 3.5mm).
Choose the method that suits your preferences and the available connectivity options on your phone.

To reset your Denon AVR-S650H receiver, you can follow these steps:
1. Turn off the receiver by pressing the power button.
. Unplug the power cord from the electrical outlet.
3. Wait for at least 10 seconds.
4. While holding down the "Power" button on the front panel, plug the power cord back into the electrical outlet.
5. Continue holding the "Power" button until "Clear" appears on the display.
6. Release the "Power" button and the receiver will reset to its factory settings.
After the reset, you will need to set up the receiver again, including input assignments, speaker settings, network configuration, etc.